All MIBs › DKSF-50-8-1-A-X › npIoLevelOut
npIoLevelOut
Module: DKSF-50-8-1-A-X
OID (symbolic): DKSF-50-8-1-A-X::npIoLevelOut
OID (numeric): 1.3.6.1.4.1.25728.8900.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Output level, 0 or 1
What is npIoLevelOut?
The logic level (0 or 1) driven out on this digital output line; an admin writes 1 or 0 here to switch an external relay, siren, or indicator connected to that I/O line.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8900.1.1.3 snmpwalk -v2c -c public <target> DKSF-50-8-1-A-X::npIoLevelOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8900.1.1.3.1 snmpget -v2c -c public <target> DKSF-50-8-1-A-X::npIoLevelOut.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8900.1.1.3.1 i <value>
Start monitoring NetPing DKSF-50 IP-based remote power/relay and sensor controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-50-8-1-A-X::npIoLevelOut OID value, configure state conditions and alerts, and monitor any NetPing DKSF-50 IP-based remote power/relay and sensor controller from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8900 | npIo | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8900.1 | npIoTable | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8900.1.1 | npIoEntry | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8900.1.1.3 | npIoLevelOut | DKSF-50-8-1-A-X |