DE-OPT-MIB

All MIBs › DE-OPT-MIB

Category: Optical and WDM

Description: Manages optical interface parameters and performance for DE optical networking equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DE-OPT-MIB?

DE-OPT-MIB's module description and sample objects are unavailable; based on its short description it appears to be a vendor enterprise MIB for managing optical interface parameters and performance on "DE" branded optical networking equipment. Based on the naming and category it likely exposes per-port optical link configuration and physical-layer performance counters similar to other optical-transport MIBs, though this cannot be confirmed without object names. Such MIBs typically support hardware-status monitoring — optical power levels, link/port status, and possibly temperature — for detecting degrading optical hardware. It likely complements standard IF-MIB interface statistics and, if the vendor supports DDM, transceiver diagnostic MIBs. Typical deployment would be an optical transport or media-converter device in a metro/access fiber network, where DE-OPT-MIB SNMP monitoring would be applied to track optical link health.

IPNetwork Monitor allows you to monitor SNMP objects defined in DE-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Codex 6500-series statistical multiplexer/data compression module (Motorola Codex) — identified via enterprise OID 449, matching sibling modules DC-OPT-MIB and DCP-OPT-MIB in the same batch, not a separately-branded 'DE' vendor as previously guessed

Monitoring Examples

No sample objects were provided for this MIB, so a concrete object-level monitoring scenario cannot be described honestly; based on its stated purpose an operator would be expected to poll per-interface optical performance and status objects, but the specific table/object names are not available to ground this.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
codex	1.3.6.1.4.1.449
cdxProductSpecific	1.3.6.1.4.1.449.2
cdx6500	1.3.6.1.4.1.449.2.1
cdx6500Configuration	1.3.6.1.4.1.449.2.1.2
cdx6500CfgGeneralGroup	1.3.6.1.4.1.449.2.1.2.2
cdx6500Statistics	1.3.6.1.4.1.449.2.1.3
cdx6500StatOtherStatsGroup	1.3.6.1.4.1.449.2.1.3.2
cdx6500StatEncryption	1.3.6.1.4.1.449.2.1.3.2.12
statEncryptionGeneral	1.3.6.1.4.1.449.2.1.3.2.12.1
INT deDataEncryptionHardwareStatus	1.3.6.1.4.1.449.2.1.3.2.12.1.1	INTEGER	read-only	Displays the current status/existence of DE hardware. up: Data encryption hardware is installed and operational. down: Data encryption hardware is non functional.
INT deMaxChannelAvailable	1.3.6.1.4.1.449.2.1.3.2.12.1.2	INTEGER	read-only	Number of DE Channels supported by the Data Encryption hardware installed on the node.
INT deMaxChannelConfigured	1.3.6.1.4.1.449.2.1.3.2.12.1.3	INTEGER	read-only	Maximum number of DE Channels configured for use. This parameter is used to control the amount of RAM that gets allocated for Data Encryption during node initialization.
INT deChannelsInUse	1.3.6.1.4.1.449.2.1.3.2.12.1.4	INTEGER	read-only	Number of DE Channels that are assigned and are currently in use by the calls.
INT deMaxSimultaneousChannelsUsed	1.3.6.1.4.1.449.2.1.3.2.12.1.5	INTEGER	read-only	Maximum number of data encryption channels in use simultaneously since the last stats reset.
INT deCurrentEncryptionQueueLength	1.3.6.1.4.1.449.2.1.3.2.12.1.6	INTEGER	read-only	Current number of frames in the queue, waiting to be encrypted or decrypted
INT deMaxEncryptionQueueDepth	1.3.6.1.4.1.449.2.1.3.2.12.1.7	INTEGER	read-only	Maximum number of frames that were in the queue since the last stats reset.
STR deTimeLastStatisticsReset	1.3.6.1.4.1.449.2.1.3.2.12.1.8	DisplayString	read-only	Time when the node restarted or the stats reset by CTP/SNMP Manager command.
INT deAlgorithmSupportedByHardwareStatus	1.3.6.1.4.1.449.2.1.3.2.12.1.9	INTEGER	read-only	Displays the current status/existence of DE Algorithm supported by Hardware. no-simm: No SIMM exists. des-40: SIMM type is DES-40. des-64: SIMM type is DES-64. des-128: SIMM type is DES-128.
statEncryptionChannelTable	1.3.6.1.4.1.449.2.1.3.2.12.2		not-accessible	Detail Encryption Statistics Table
statEncryptionChannelEntry	1.3.6.1.4.1.449.2.1.3.2.12.2.1		not-accessible	Detail Encryption Statistics Entry
INT deStatChannelNumber	1.3.6.1.4.1.449.2.1.3.2.12.2.1.1	INTEGER	read-only	Channel Number.
STR deLastStatisticsReset	1.3.6.1.4.1.449.2.1.3.2.12.2.1.2	DisplayString	read-only	Time of the Channel stats reset by CTP/SNMP Manager command.
INT deChannelState	1.3.6.1.4.1.449.2.1.3.2.12.2.1.3	INTEGER	read-only	Activity state of the Channel. nonData: Non encrypted data data: Encrypted data
STR deSourceChannel	1.3.6.1.4.1.449.2.1.3.2.12.2.1.4	DisplayString	read-only	Access Protocols identity string
STR deDestinationChannel	1.3.6.1.4.1.449.2.1.3.2.12.2.1.5	DisplayString	read-only	Network Protocols identity string
INT deCorruptedPackets	1.3.6.1.4.1.449.2.1.3.2.12.2.1.6	INTEGER	read-only	Number of decrypted packets with false data integrity check field.
cdx6500Controls	1.3.6.1.4.1.449.2.1.4
cdx6500ControlsEncryption	1.3.6.1.4.1.449.2.1.4.18
ctrlEncryptionGeneral	1.3.6.1.4.1.449.2.1.4.18.1
INT deCtrlEncryptionGeneral	1.3.6.1.4.1.449.2.1.4.18.1.1	INTEGER	write-only	When set, this parameter resets all the data encryption statistics for all channels.
ctrlEncryptionChannelTable	1.3.6.1.4.1.449.2.1.4.18.2		not-accessible	Detail Encryption Control Table
ctrlEncryptionChannelEntry	1.3.6.1.4.1.449.2.1.4.18.2.1		not-accessible	Detail Encryption Control Entry
INT deCtrlChannelNumber	1.3.6.1.4.1.449.2.1.4.18.2.1.1	INTEGER	not-accessible	Channel Number.
INT deCtrlEncryptionChannel	1.3.6.1.4.1.449.2.1.4.18.2.1.2	INTEGER	write-only	When set, this parameter resets the data encryption statistics for a given channel.

RFC description

Codex CDX 6500 data encryption MIB for managing hardware encryption status, channels, and encryption statistics.

Start monitoring Codex 6500-series statistical multiplexer/data compression module (Motorola Codex) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DE-OPT-MIB

What Is DE-OPT-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description