HH3C-TRANSCEIVER-INFO-MIB

All MIBs › HH3C-TRANSCEIVER-INFO-MIB

Organization: Hangzhou H3C Technologies Co., Ltd.

Last Updated: 2014-08-11

Category: Hardware and Environment, Network Interfaces, Optical and WDM, Technology: Optical Transport, Vendor: H3C/HH3C

Description: HH3C MIB for optical transceiver information providing DOM/SFP module diagnostics on H3C switch ports.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-TRANSCEIVER-INFO-MIB?

HH3C-TRANSCEIVER-INFO-MIB is an H3C-specific MIB that reports information about pluggable optical transceivers (SFP/SFP+/XFP modules) installed in switch or router interface ports, similar in spirit to the industry-standard SFF-8472 Digital Optical Monitoring (DOM) data. It exposes per-transceiver identity and diagnostic data tied to a specific interface. This is squarely a hardware health-monitoring MIB: it lets an operator track transceiver presence, type, and physical-layer optical health (e.g., laser bias current, transmit/receive optical power, and module temperature where DOM is supported), critical for diagnosing fiber-link degradation before it causes an outage. No sample objects were captured here, so exact table/object names cannot be confirmed, but the module description indicates the data is organized per-interface. It has no stated dependency beyond the standard IF-MIB interface index used to associate a transceiver with its port; typical deployment is an H3C enterprise or carrier switch/router chassis using pluggable optical modules for uplinks. Engineers can download the HH3C-TRANSCEIVER-INFO-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-TRANSCEIVER-INFO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C switches and routers with pluggable optical transceivers (SFP/SFP+/XFP)

Monitoring Examples

No sample objects were provided for this MIB, so a concrete polling scenario referencing real object names cannot be given honestly; based on the module description, one would expect a per-interface transceiver table exposing module type/vendor and optical DOM readings (transmit/receive power, temperature), which would reveal a degrading fiber link if received optical power trended down over time.

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cTransceiver	1.3.6.1.4.1.25506.2.70			The objects in this MIB module are used to display the information of transceiver on interface.
hh3cTransceiverInfoAdm	1.3.6.1.4.1.25506.2.70.1
hh3cTransceiverInfoTable	1.3.6.1.4.1.25506.2.70.1.1		not-accessible	This table shows transceiver information on an interface.
hh3cTransceiverInfoEntry	1.3.6.1.4.1.25506.2.70.1.1.1		not-accessible	The entry of the hh3cTransceiverInfoTable.
OCT hh3cTransceiverHardwareType	1.3.6.1.4.1.25506.2.70.1.1.1.1	OCTET STRING	read-only	Hardware type of the interface, such as SM(single mode).
OCT hh3cTransceiverType	1.3.6.1.4.1.25506.2.70.1.1.1.2	OCTET STRING	read-only	Type of the interface, such as SFP/XFP/GBIC.
I32 hh3cTransceiverWaveLength	1.3.6.1.4.1.25506.2.70.1.1.1.3	Integer32	read-only	Wave length of the interface, measured in nanometer.
OCT hh3cTransceiverVendorName	1.3.6.1.4.1.25506.2.70.1.1.1.4	OCTET STRING	read-only	Vendor name of the interface.
OCT hh3cTransceiverSerialNumber	1.3.6.1.4.1.25506.2.70.1.1.1.5	OCTET STRING	read-only	Serial number of the interface.
INT hh3cTransceiverFiberDiameterType	1.3.6.1.4.1.25506.2.70.1.1.1.6	INTEGER	read-only	The diameter of the fiber, measured in micron. fiber9 - 9 micron multi-mode fiber fiber50 - 50 micron multi-mode fiber fiber625 - 62.5 micron multi-mode fiber copper - copper cable.
I32 hh3cTransceiverTransferDistance	1.3.6.1.4.1.25506.2.70.1.1.1.7	Integer32	read-only	The maximum distance which the interface can transmit, measured in meter.
T/F hh3cTransceiverDiagnostic	1.3.6.1.4.1.25506.2.70.1.1.1.8	TruthValue	read-only	Indicating the digital diagnostic monitoring function.
I32 hh3cTransceiverCurTXPower	1.3.6.1.4.1.25506.2.70.1.1.1.9	Integer32	read-only	Indicating the current transmitted power. The unit is in hundredths of dBM.
I32 hh3cTransceiverMaxTXPower	1.3.6.1.4.1.25506.2.70.1.1.1.10	Integer32	read-only	Indicating the maximum transmitted power. The unit is in hundredths of dBM.
I32 hh3cTransceiverMinTXPower	1.3.6.1.4.1.25506.2.70.1.1.1.11	Integer32	read-only	Indicating the minimum transmitted power. The unit is in hundredths of dBM.
I32 hh3cTransceiverCurRXPower	1.3.6.1.4.1.25506.2.70.1.1.1.12	Integer32	read-only	Indicating the current received power. The unit is in hundredths of dBM.
I32 hh3cTransceiverMaxRXPower	1.3.6.1.4.1.25506.2.70.1.1.1.13	Integer32	read-only	Indicating the maximum received power. The unit is in hundredths of dBM.
I32 hh3cTransceiverMinRXPower	1.3.6.1.4.1.25506.2.70.1.1.1.14	Integer32	read-only	Indicating the minimum received power. The unit is in hundredths of dBM.
I32 hh3cTransceiverTemperature	1.3.6.1.4.1.25506.2.70.1.1.1.15	Integer32	read-only	Indicating the current temperature. The unit is Celsius centigrade.
I32 hh3cTransceiverVoltage	1.3.6.1.4.1.25506.2.70.1.1.1.16	Integer32	read-only	Indicating the current voltage. The unit is in hundredths of V
I32 hh3cTransceiverBiasCurrent	1.3.6.1.4.1.25506.2.70.1.1.1.17	Integer32	read-only	Indicating the current bias electric current. The unit is in hundredths of mA
I32 hh3cTransceiverTempHiAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.18	Integer32	read-only	Transceiver temperature high alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
I32 hh3cTransceiverTempLoAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.19	Integer32	read-only	Transceiver temperature low alarm threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
I32 hh3cTransceiverTempHiWarn	1.3.6.1.4.1.25506.2.70.1.1.1.20	Integer32	read-only	Transceiver temperature high warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
I32 hh3cTransceiverTempLoWarn	1.3.6.1.4.1.25506.2.70.1.1.1.21	Integer32	read-only	Transceiver temperature low warning threshold limit in thousandths of degrees Celsius. As an example: 49120 is 49.120 degrees Celsius.
I32 hh3cTransceiverVccHiAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.22	Integer32	read-only	Transceiver VCC high alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
I32 hh3cTransceiverVccLoAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.23	Integer32	read-only	Transceiver VCC low alarm threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
I32 hh3cTransceiverVccHiWarn	1.3.6.1.4.1.25506.2.70.1.1.1.24	Integer32	read-only	Transceiver VCC high warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
I32 hh3cTransceiverVccLoWarn	1.3.6.1.4.1.25506.2.70.1.1.1.25	Integer32	read-only	Transceiver VCC low warning threshold limit in hundreds of microvolts. As an example: 32928 is 3.2928 volts. Returns zero if not supported on the transceiver.
I32 hh3cTransceiverBiasHiAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.26	Integer32	read-only	Transceiver bias high alarm threshold limit in microamps.
I32 hh3cTransceiverBiasLoAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.27	Integer32	read-only	Transceiver bias low alarm threshold limit in microamps.
I32 hh3cTransceiverBiasHiWarn	1.3.6.1.4.1.25506.2.70.1.1.1.28	Integer32	read-only	Transceiver bias high warning threshold limit in microamps.
I32 hh3cTransceiverBiasLoWarn	1.3.6.1.4.1.25506.2.70.1.1.1.29	Integer32	read-only	Transceiver bias low warning threshold limit in microamps.
I32 hh3cTransceiverPwrOutHiAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.30	Integer32	read-only	Transceiver transmit power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hh3cTransceiverPwrOutLoAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.31	Integer32	read-only	Transceiver transmit power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hh3cTransceiverPwrOutHiWarn	1.3.6.1.4.1.25506.2.70.1.1.1.32	Integer32	read-only	Transceiver transmit power high warning threshold limit in tenths of microwatts As an example: 10000 is 1 milliwatt.
I32 hh3cTransceiverPwrOutLoWarn	1.3.6.1.4.1.25506.2.70.1.1.1.33	Integer32	read-only	Transceiver transmit power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hh3cTransceiverRcvPwrHiAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.34	Integer32	read-only	Transceiver receive power high alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hh3cTransceiverRcvPwrLoAlarm	1.3.6.1.4.1.25506.2.70.1.1.1.35	Integer32	read-only	Transceiver receive power low alarm threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hh3cTransceiverRcvPwrHiWarn	1.3.6.1.4.1.25506.2.70.1.1.1.36	Integer32	read-only	Transceiver receive power high warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
I32 hh3cTransceiverRcvPwrLoWarn	1.3.6.1.4.1.25506.2.70.1.1.1.37	Integer32	read-only	Transceiver receive power low warning threshold limit in tenths of microwatts. As an example: 10000 is 1 milliwatt.
BIT hh3cTransceiverErrors	1.3.6.1.4.1.25506.2.70.1.1.1.38	Bits	read-only	Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31)
OCT hh3cTransceiverVendorOUI	1.3.6.1.4.1.25506.2.70.1.1.1.39	OCTET STRING	read-only	Vendor OUI of the interface.
OCT hh3cTransceiverRevisionNumber	1.3.6.1.4.1.25506.2.70.1.1.1.40	OCTET STRING	read-only	Revision number of the interface.
hh3cTransceiverChannelTable	1.3.6.1.4.1.25506.2.70.1.2		not-accessible	This table provides statistics about transceiver with multi-channel.
hh3cTransceiverChannelEntry	1.3.6.1.4.1.25506.2.70.1.2.1		not-accessible	The entry of the hh3cTransceiverChannelTable.
I32 hh3cTransceiverChannelIndex	1.3.6.1.4.1.25506.2.70.1.2.1.1	Integer32	not-accessible	The channel index of transceiver. Indicating one channel of the interface.
I32 hh3cTransceiverChannelCurTXPower	1.3.6.1.4.1.25506.2.70.1.2.1.2	Integer32	read-only	Indicating the current transmission power. The unit is in hundredths of dBM.
I32 hh3cTransceiverChannelCurRXPower	1.3.6.1.4.1.25506.2.70.1.2.1.3	Integer32	read-only	Indicating the current received power. The unit is in hundredths of dBM.
I32 hh3cTransceiverChannelTemperature	1.3.6.1.4.1.25506.2.70.1.2.1.4	Integer32	read-only	Indicating the current temperature. The unit is Celsius centigrade.
I32 hh3cTransceiverChannelBiasCurrent	1.3.6.1.4.1.25506.2.70.1.2.1.5	Integer32	read-only	Indicating the current bias electric current. The unit is in hundredths of mA.

RFC description

Displays optical transceiver information including power levels, temperature, voltage, and diagnostic data on H3C interfaces.

Start monitoring H3C switch/router with pluggable optical transceivers (SFP/SFP+/XFP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-TRANSCEIVER-INFO-MIB

What Is HH3C-TRANSCEIVER-INFO-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description