CIENA-WS-PTP-PLUGGABLE-MIB

Description: Manages pluggable coherent modem modules for PTP line ports on Ciena WaveServer platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

CIENA-WS-PTP-PLUGGABLE-MIB is a YANG-derived SMI module from Ciena that describes the pluggable coherent PTP (point-to-point) transceiver modules used on the line ports of Ciena WaveServer optical transport platforms. It augments the base ciena-ws-ptp module with transceiver-specific attributes and status, focusing on the optical signal carried by the pluggable at the client port. The data it exposes centers on hardware fault and signal-integrity status of the optical module itself, most notably transmit-side loss-of-signal and loss-of-lock conditions that indicate a failed or degraded pluggable, fiber break, or clock synchronization problem. Because pluggables are auto-provisioned at installation, this MIB effectively lets operators confirm a newly inserted module is transmitting cleanly and remains locked without manual configuration. It depends on the parent ciena-ws-ptp module for the object it augments and is typically deployed by carriers and data-center-interconnect operators monitoring high-capacity coherent optical line systems. Engineers can download the CIENA-WS-PTP-PLUGGABLE-MIB file directly to load it into their MIB browser.

An operator polls cwsPtpAugPtpPluggableTxStatusTable / cwsPtpAugPtpPluggableTxStatusEntry across all installed line-side pluggables to build a per-port health map, checking cwsPtpPluggableTxStatusLossOfSignal and cwsPtpPluggableTxStatusLossOfLock for each entry. A LossOfSignal flip to true on a specific entry indicates the transceiver has stopped transmitting, often due to a laser failure or unseated module, while LossOfLock without LossOfSignal suggests a clock or framing synchronization issue upstream. Correlating these two flags across the cienaWsPtpPluggableObjects subtree lets NOC staff quickly isolate whether an optical line fault is signal-level or timing-level before dispatching a technician.

Ciena Waveserver PTP pluggable transceiver management defining pluggable client port signal configuration and status.