| OID symbolic | OID numeric | Type | Access | Description |
|---|
| dlinkSwSFlowMIB | 1.3.6.1.4.1.171.26.36 | | | The structure of sFlow for the proprietary enterprise. |
| dSFlowMIBNotifications | 1.3.6.1.4.1.171.26.36.0 | | | |
| dSFlowMIBObjects | 1.3.6.1.4.1.171.26.36.1 | | | |
| STR dSFlowVersion | 1.3.6.1.4.1.171.26.36.1.1 | SnmpAdminString | read-only | Uniquely identifies the version and implementation of this MIB.
The version string must have the following structure:
;;
where:
must be '1.3', the version of referred SFLOW-MIB,
which is defined by sFlow.org.
the name of the organization responsible
for the agent implementation.
the specific software build of this agent.
As an example, the string '1.3;InMon Corp.;2.1.1' indicates
that this agent implements version '1.2' of the SFLOW MIB, that
it was developed by 'InMon Corp.' and that the software build
is '2.1.1'.
The MIB Version will change with each revision of the SFLOW-MIB.
Management entities must check the MIB Version and not attempt
to manage agents with MIB Versions greater than that for which
they were designed.
Note: The sFlow Datagram Format has an independent version
number which may change independently from .
applies to the structure and semantics of
the SFLOW MIB only. |
| ADR dSFlowAgentAddressIPv4 | 1.3.6.1.4.1.171.26.36.1.2 | InetAddressIPv4 | read-only | The IPv4 address associated with this agent. |
| ADR dSFlowAgentAddressIPv6 | 1.3.6.1.4.1.171.26.36.1.3 | InetAddressIPv6 | read-only | The IPv6 address associated with this agent. If the IPv6
is not supported on this agent, 0::0 will be displayed. |
| dSFlowRcvrTable | 1.3.6.1.4.1.171.26.36.1.4 | | not-accessible | A table of the receivers of sFlow information. |
| dSFlowRcvrEntry | 1.3.6.1.4.1.171.26.36.1.4.1 | | not-accessible | Attributes of an sFlow Receiver. |
| I32 dSFlowRcvrIndex | 1.3.6.1.4.1.171.26.36.1.4.1.1 | Integer32 | not-accessible | Index into dSFlowReceiverTable. The number of supported receivers
is project dependent. |
| STR dSFlowRcvrOwner | 1.3.6.1.4.1.171.26.36.1.4.1.2 | DisplayString | read-write | The entity making use of this dSFlowRcvrTable entry. The
empty string indicates that the entry is currently unclaimed.
An entity wishing to claim a dSFlowRcvrTable entry must
ensure that the entry is unclaimed before trying to claim it.
The entry is claimed by setting the owner string. The entry
must be claimed before any changes can be made to the receiver's
other objects.
When a management entity is finished using the receiver, it
should set the value of dSFlowRcvrOwner back to unclaimed.
The agent must restore all other entities this row to their
default values when the owner is set to unclaimed. It must
also free all other resources associated with this
dSFlowRcvrTable entry.
This mechanism provides no enforcement and relies on the
cooperation of management entities in order to ensure that
competition for a receiver entry is fairly resolved. |
| I32 dSFlowRcvrAdminTimeout | 1.3.6.1.4.1.171.26.36.1.4.1.3 | Integer32 | read-write | The expire time (in seconds) configured for the receiver.
A management entity wanting to maintain control of the receiver
is responsible for setting a new value before the old one
expires.
When the interval expires, the agent is responsible for
restoring all other entities in this row to their default
values. It must also free all other resources associated with
this dSFlowRcvrTable entry.
When set, 0 means infinite that the receiver will never be
expired. |
| I32 dSFlowRcvrCurrentTimeout | 1.3.6.1.4.1.171.26.36.1.4.1.4 | Integer32 | read-only | The time (in seconds) remaining before the receiver is released. |
| I32 dSFlowRcvrMaximumDatagramSize | 1.3.6.1.4.1.171.26.36.1.4.1.5 | Integer32 | read-write | The maximum number of data bytes that can be sent in a single
sample datagram. The manager should set this value to avoid
fragmentation of the sFlow datagrams. |
| IPt dSFlowRcvrAddressType | 1.3.6.1.4.1.171.26.36.1.4.1.6 | InetAddressType | read-write | The address type of the sFlow collector. |
| IP dSFlowRcvrAddress | 1.3.6.1.4.1.171.26.36.1.4.1.7 | InetAddress | read-write | The IP address of the sFlow collector.
If set to 0.0.0.0 no sFlow datagrams will be sent. |
| STR dSFlowRcvrVrfName | 1.3.6.1.4.1.171.26.36.1.4.1.8 | DisplayString | read-write | Specify the name of the routing forwarding instance. |
| I32 dSFlowRcvrPort | 1.3.6.1.4.1.171.26.36.1.4.1.9 | Integer32 | read-write | The UDP port of the remote sFlow collector. |
| I32 dSFlowRcvrDatagramVersion | 1.3.6.1.4.1.171.26.36.1.4.1.10 | Integer32 | read-only | The version of sFlow datagrams that should be sent. |
| INT dSFlowRcvrReset | 1.3.6.1.4.1.171.26.36.1.4.1.11 | INTEGER | read-write | This object reset the receiver when set to 'reset'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned. |
| dSFlowFsTable | 1.3.6.1.4.1.171.26.36.1.5 | | not-accessible | A table of the flow samplers within a device. |
| dSFlowFsEntry | 1.3.6.1.4.1.171.26.36.1.5.1 | | not-accessible | Attributes of a flow sampler. |
| DSF dSFlowFsDataSource | 1.3.6.1.4.1.171.26.36.1.5.1.1 | DSFlowDataSource | not-accessible | This object indicates the source of the data for this flow
sampler. |
| DSF dSFlowFsInstance | 1.3.6.1.4.1.171.26.36.1.5.1.2 | DSFlowInstance | not-accessible | The instance index for uniquely identifying the flow sampler
when multiple flow samplers are associated with one interface. |
| DSF dSFlowFsReceiver | 1.3.6.1.4.1.171.26.36.1.5.1.3 | DSFlowReceiver | read-create | The index of the sFlow receiver for this flow sampler. |
| INT dSFlowFsDirection | 1.3.6.1.4.1.171.26.36.1.5.1.4 | INTEGER | read-create | This object indicates the flow direction which will be sampled.
'inbound' - sample ingress packets.
'outbound' - sample egress packets. |
| I32 dSFlowFsAdminSamplingRate | 1.3.6.1.4.1.171.26.36.1.5.1.5 | Integer32 | read-create | The configured sampling rate for packet sampling from this
source.
Set to N to sample 1/Nth of the packets in the monitored flows.
An agent should choose its own algorithm to introduce variance
into the sampling so that exactly every Nth packet is not
counted. A sampling rate of 1 counts all packets. A sampling
rate of 0 disables sampling.
The agent is permitted to have minimum and maximum allowable
values for the sampling rate. A minimum rate lets the agent
designer set an upper bound on the overhead associated with
sampling, and a maximum rate may be the result of hardware
restrictions (such as counter size). In addition not all values
between the maximum and minimum may be realizable as the
sampling rate (again because of implementation considerations).
When the sampling rate is set the agent is free to adjust the
value so that it lies between the maximum and minimum values
and has the closest achievable value.
When read, the configured sampling rate will be returned. |
| I32 dSFlowFsActiveSamplingRate | 1.3.6.1.4.1.171.26.36.1.5.1.6 | Integer32 | read-only | The statistical sampling rate for packet sampling from this
source.
When read, the agent must return the actual sampling rate it
will be using (after the adjustments previously described). The
sampling algorithm must converge so that over time the number
of packets sampled approaches 1/Nth of the total number of
packets in the monitored flows. |
| ROW dSFlowFsRowStatus | 1.3.6.1.4.1.171.26.36.1.5.1.8 | RowStatus | read-create | This object indicates the status of this entry. |
| dSFlowCpTable | 1.3.6.1.4.1.171.26.36.1.6 | | not-accessible | A table of the counter pollers within a device. |
| dSFlowCpEntry | 1.3.6.1.4.1.171.26.36.1.6.1 | | not-accessible | Attributes of a counter poller. |
| DSF dSFlowCpDataSource | 1.3.6.1.4.1.171.26.36.1.6.1.1 | DSFlowDataSource | not-accessible | Identifies the source of the data for the counter poller. |
| DSF dSFlowCpInstance | 1.3.6.1.4.1.171.26.36.1.6.1.2 | DSFlowInstance | not-accessible | The instance instance index for uniquely identifying the counter
poller when multiple Pollers are associated with one interface. |
| DSF dSFlowCpReceiver | 1.3.6.1.4.1.171.26.36.1.6.1.3 | DSFlowReceiver | read-create | The sflow receiver's index for this counter poller. |
| I32 dSFlowCpInterval | 1.3.6.1.4.1.171.26.36.1.6.1.4 | Integer32 | read-create | The maximum number of seconds between successive samples of the
counters associated with this data source. A sampling interval
of 0 disables counter sampling.
The agent is permitted to have minimum and maximum allowable
values for the counter polling interval. A minimum interval
lets the agent designer set an upper bound on the overhead
associated with polling, and a maximum interval may be the
result of implementation restrictions (such as counter size).
In addition not all values between the maximum and minimum may
be realizable as the sampling interval (again because of
implementation considerations). |
| ROW dSFlowCpRowStatus | 1.3.6.1.4.1.171.26.36.1.6.1.5 | RowStatus | read-create | This object indicates the status of this entry. |
| dSFlowMIBConformance | 1.3.6.1.4.1.171.26.36.2 | | | |
| dSFlowMIBCompliances | 1.3.6.1.4.1.171.26.36.2.1 | | | |
| dSFlowCompliance | 1.3.6.1.4.1.171.26.36.2.1.1 | | | The compliance statement for entities which implement the
DLINKSW-SFLOW-MIB. |
| dSFlowMIBGroups | 1.3.6.1.4.1.171.26.36.2.2 | | | |
| dSFlowAgentGroup | 1.3.6.1.4.1.171.26.36.2.2.1 | | | A collection of objects for managing the generation and
transportation of sFlow data records. |
