All MIBs › CXFLT-IPX-MIB › cxFltIpxSrcAddr
cxFltIpxSrcAddr
Module: CXFLT-IPX-MIB
OID (symbolic): CXFLT-IPX-MIB::cxFltIpxSrcAddr
OID (numeric): 1.3.6.1.4.1.495.2.1.6.22.1.1.2
Node type: OBJECT-TYPE
Type: NetNumber
Access: read-write
Description: Determines the source IPX address (network number) used for filtering/forwarding. This address corresponds to a destination address in cxFltIpxDstAddr of this table. The object cxFltIpxParameter determines whether data is filtered or forwarded from the source address to the destination address.
This number must be entered as 8 hexadecimal characters (four octets), for example 0xAB12CD34. The 0x must be present in every number; it indicates that the number is a hex number and is not counted as one of the octets. The x must be lowercase; the other characters are not case sensitive.
Default Value: None
Range of Values: 4 octets, each character ranging from 00 to FF
Configuration Changed: administrative
What is cxFltIpxSrcAddr?
This value specifies the source IPX network number that a filter rule matches against, working together with cxFltIpxDstAddr to define which traffic flow the rule's filtering or forwarding action applies to. An admin enters this as an 8-character hexadecimal network number to identify traffic originating from a particular IPX network segment that should be filtered or forwarded according to this rule. For example, entering 0xAB12CD34 as the source address means this rule only applies to IPX traffic originating from that specific network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.22.1.1.2 snmpwalk -v2c -c public <target> CXFLT-IPX-MIB::cxFltIpxSrcAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.22.1.1.2.1 snmpget -v2c -c public <target> CXFLT-IPX-MIB::cxFltIpxSrcAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.22.1.1.2.1 s <value>
Start monitoring CX/Memotec modular chassis platform (IPX filtering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFLT-IPX-MIB::cxFltIpxSrcAddr OID value, configure state conditions and alerts, and monitor any CX/Memotec modular chassis platform (IPX filtering) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.22 | cxFltIpx | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.22.1 | cxFltIpxAddrTable | CXFLT-IPX-MIB |
| 1.3.6.1.4.1.495.2.1.6.22.1.1 | cxFltIpxAddrEntry | CXFLT-IPX-MIB |
| 1.3.6.1.4.1.495.2.1.6.22.1.1.2 | cxFltIpxSrcAddr | CXFLT-IPX-MIB |