CXDial-MIB

All MIBs › CXDial-MIB

Category: Domain: WAN, Vendor: Memotec

Description: Manages dial-up connection parameters, call setup, and modem configuration on CX Memotec devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CXDial-MIB?

CXDial-MIB is a small private MIB (built on CXProduct-SMI) providing a shared dial-capability configuration table referenced by other dial-capable protocol MIBs on this modular platform. Its table, keyed by index, records physical/function type, row status, inactivity/backup-polling/delay timers, and ISDN BCM (Basic Call Management) settings — user-SAP alias, number of B-channels, directory ID — alongside a MIB-level version object. As a configuration MIB it lets an administrator confirm a dial-capable interface's inactivity and backup-polling timers. It is deployed on this vendor's modular voice/data-processing chassis with dial-backup interfaces. Engineers can download the CXDial-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CXDial-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Modular voice/data-processing chassis (CXProduct family)

Monitoring Examples

An administrator checks cxDialInactivityTimer to confirm how long a dial-backup interface waits before considering the primary link down on this platform.

What Can Be Monitored

dial-capability configuration and timers

Imported Objects

From CXProduct-SMI

Alias
cxDial	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
cxDialTable	1.3.6.1.4.1.495.2.1.6.46.1		not-accessible	Table containing configuration information about dial functionality. This table acts as a focal point to configure the dial capability. Each protocol providing dial incorporates an object which point to one row of this table.
cxDialEntry	1.3.6.1.4.1.495.2.1.6.46.1.1		not-accessible	This row holds all the parameters related to the dial functionality.
INT cxDialEntryIndex	1.3.6.1.4.1.495.2.1.6.46.1.1.1	INTEGER	read-only	Local table index. Used to manage this table and by application implementing dial functions.
INT cxDialPhysicalType	1.3.6.1.4.1.495.2.1.6.46.1.1.2	INTEGER	read-write	Determines how the dial function is physically supported. Options: dtr (1): Data Terminal Ready isdn (2): ISDN Default Value: dtr (1) Configuration Changed: administrative
INT cxDialFunctionType	1.3.6.1.4.1.495.2.1.6.46.1.1.3	INTEGER	read-write	Determines when the dial function is used. Options: onDemand (1): used on demand onCongestion (2): not currently used Default Value: onDemand (1) Configuration Changed: administrative
INT cxDialRowStatus	1.3.6.1.4.1.495.2.1.6.46.1.1.6	INTEGER	read-write	Determines whether this dial function is to be removed from service (i.e. invalidated) within the Dial software layer. Options: invalid (1): row is flagged; after next reset values will be disabled and row will be deleted from table valid (2): values are enabled Default Value: valid (2) Configuration Changed: administrative
INT cxDialInactivityTimer	1.3.6.1.4.1.495.2.1.6.46.1.1.10	INTEGER	read-write	Determines the time in seconds that can pass before a SAP providing dial access drops its connection due to inactivity. Range of Values: 0 - 65,535 Default Value: 20 Configuration Changed: administrative
INT cxDialBackupPollingTimer	1.3.6.1.4.1.495.2.1.6.46.1.1.11	INTEGER	read-write	Determines the interval in seconds that the Frame Relay software layer will wait before polling and terminating connections of dial backup ports when primary route partners related to these ports have become active. Range of Values: 0 - 65,535 Default Value: 0 Configuration Changed: administrative
INT cxDialDelayTimer	1.3.6.1.4.1.495.2.1.6.46.1.1.12	INTEGER	read-write	Determines the number of seconds that the Frame Relay software layer waits before requesting the lower layer to bring up the dialup line. Range of Values: 0 - 65,535 Default Value: 0 Configuration Changed: operative
ALI cxDialIsdnBcmUSapAlias	1.3.6.1.4.1.495.2.1.6.46.1.1.15	Alias	read-write	Determines the textual name uniquely identifying this upper SAP. This object is meaningful only if 'cxDialPhysicalType' is set to 'isdn'. Range of Values: 0-16 alphanumeric characters beginning with a letter Default Value: none Configuration Changed: administrative
INT cxDialIsdnBcmNbrOfBChannels	1.3.6.1.4.1.495.2.1.6.46.1.1.16	INTEGER	read-write	Determines the number of ISDN B channels that have dial funtionality. This object is meaningful only if 'cxDialPhysicalType' is set to 'isdn'. Range of Values: 1-2 (locked at 1) Default Value: 1 Configuration Changed: administrative
INT cxDialIsdnBcmDirectoryId	1.3.6.1.4.1.495.2.1.6.46.1.1.17	INTEGER	read-write	Determines the ISDN access point having dial funtionality. This object is meaningful only if 'cxDialPhysicalType' is set to 'isdn'. Range of Values: 1-40 Default Value: 1 Configuration Changed: administrative
INT cxDialMibLevel	1.3.6.1.4.1.495.2.1.6.46.2	INTEGER	read-only	Used to determine current MIB module release supported by the agent. Object is in decimal.

RFC description

Dial configuration management for DTR and ISDN dial functionality on Codex communication platforms.

Start monitoring CX/Memotec modular voice/data chassis (dial-backup config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CXDial-MIB

What Is CXDial-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description