CXChassis-MIB

All MIBs › CXChassis-MIB

Category: Domain: System Management, Vendor: Memotec

Description: Monitors chassis hardware inventory, slot configuration, and power status on CX Memotec platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CXChassis-MIB?

CXChassis-MIB is a legacy proprietary MIB (built on CXProduct-SMI) reporting chassis subsystem/card inventory and controlling card-up/card-down trap notifications. Its objects cover a trap-enable control for card-down/card-up traps, a file-target-slot selector, a subsystem table (slot number, description, object ID, name, services, version, operational state, config, restart action), and a chassis MIB-level indicator. As a hardware/status MIB it lets an administrator confirm which chassis card slots are populated and their operational state, and control whether card insertion/removal traps fire. It is deployed on this vendor's modular chassis product line. Engineers can download the CXChassis-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CXChassis-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Modular chassis equipment (CXProduct-SMI vendor line)

Monitoring Examples

An administrator checks cxChasSubSysOperState per slot to confirm all installed chassis cards are operational, and enables cxChasTrapCard to be alerted on future card removal.

What Can Be Monitored

chassis subsystem/card inventory and operational state

Imported Objects

From CXProduct-SMI

cxChassis	OBJECT-IDENTITY
cxRegChasCX1000	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT cxChasTrapCard	1.3.6.1.4.1.495.2.1.4.1	INTEGER	read-write	Control (enable or disable) the two traps; cxChasCardDownTrap and cxChasCardUpTrap. Options: disabled (1): The traps are disabled. enabled (2): The traps are enabled. Default Value: (1)
INT cxFileTargetSlot	1.3.6.1.4.1.495.2.1.4.2	INTEGER	read-write	Sets the CX1000 slot to which a file transfer from a remote IP station will take place. The setting 0 indicates the NME slot (the slot in which the agent resides).
cxChasSubSysTable	1.3.6.1.4.1.495.2.1.4.5		not-accessible	The subsystem description table.
cxChasSubSysEntry	1.3.6.1.4.1.495.2.1.4.5.1		not-accessible	Information about the subsystem present in the chassis.
INT cxChasSubSysSlotNb	1.3.6.1.4.1.495.2.1.4.5.1.1	INTEGER	read-only	The destination cpu card slot number.
STR cxChasSubSysDesc	1.3.6.1.4.1.495.2.1.4.5.1.2	DisplayString	read-only	A textual description of the system. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software. This description must contain only printable ASCII characters. Range of Values: 0 to 255
OID cxChasSubSysObjectID	1.3.6.1.4.1.495.2.1.4.5.1.3	OBJECT IDENTIFIER	read-only	An administratively-assigned object ID for this managed sub system. This object is defined in the cxRegistration branch and is used to identify the subsystem.
STR cxChasSubSysName	1.3.6.1.4.1.495.2.1.4.5.1.4	DisplayString	read-only	An administratively-assigned name for this managed node. This name is used to identify the subsystem (cpu card) for system routing.
INT cxChasSubSysServices	1.3.6.1.4.1.495.2.1.4.5.1.5	INTEGER	read-only	A value which indicates the set of services that this system primarily offers. The value is a sum. This sum initially takes the value zero, then, for each Selector, S, in the range from 1 through MAXSELECTOR implemented at this node, a value of 2 raised to the S is added to the sum. A Subsystem which implements Frame Relay switch functionality only would have a value of: - 2^(SEL-FR-FIRST-PROT) + 2^(SEL-BOP-FIRST-PROT) = 2^7 + 2^11 = XXX A Subsystem which implement FRAD functionality would have a value of: - 2^(SEL-FRAD-FIRST-PROT) + 2^(SEL-FR-FIRST-PROT) + 2^(SEL-BOP-FIRST-PROT)
INT cxChasSubSysVersion	1.3.6.1.4.1.495.2.1.4.5.1.6	INTEGER	read-only	The version of the subsystem.
INT cxChasSubSysOperState	1.3.6.1.4.1.495.2.1.4.5.1.7	INTEGER	read-only	The operating state of the subsystem. Options: noresponse (1): The subsystem is not responding. responding (2): The subsystem is responding.
INT cxChasSubSysConfig	1.3.6.1.4.1.495.2.1.4.5.1.8	INTEGER	write-only	The action for the configuration of the subsystem. The saved configuraton will be used in the next warm start. Options: writetoflash (1): The configuration will be written to flash memory.
INT cxChasSubSysRestart	1.3.6.1.4.1.495.2.1.4.5.1.9	INTEGER	write-only	The action to restart the subsystem. Options: warmstart-with-save (1): Warm start (with save). coldstart (2): Coldstart. warmstart-without-save (3): Warm start (without save).
INT chassisMibLevel	1.3.6.1.4.1.495.2.1.4.10	INTEGER	read-only	Used to determine current MIB module release supported by the agent. Object is in decimal.
NTF cxChasCardUpTrap	1.3.6.1.4.1.495.2.1.7.1.1.0.10			The enterprise specifc trap indicates the card in the slot is up
NTF cxChasCardDownTrap	1.3.6.1.4.1.495.2.1.7.1.1.0.11			The enterprise specific trap indicates the card in the slot is down

RFC description

Vendor management MIB for CIENA Cyan (CX) series platforms; manages chassis/card inventory, power, temperature, and physical component status.

Start monitoring CX/Memotec modular chassis equipment (card inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CXChassis-MIB

What Is CXChassis-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description