CSAT-5060

All MIBs › CSAT-5060

Organization: Comtech EF Data Corp.

Last Updated: 2005-11-05

Category: Satellite

Description: Manages CSAT-5060 satellite modem or network device configuration, link status, and signal quality metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CSAT-5060?

CSAT-5060 is a Comtech EF Data Corp. proprietary MIB for the CSAT-5060 satellite transceiver, configuring RF and unit-level operational parameters. Its objects cover unit selection, model/software version, serial number, device time/date, circuit ID, mute mode, cold-start and auto-fault-recovery settings, external-reference fault logic, reference-oscillator adjust, LNA current source/window/fault-logic, redundancy mode and force-switch action, and TX/RX frequency, attenuation, amplifier, mute, slope mode/value, gain offset. As a configuration/status MIB it lets an administrator confirm RF transmit/receive parameters and redundancy state on a CSAT-5060 satellite transceiver. It is deployed on the Comtech EF Data CSAT-5060 satellite transceiver. Engineers can download the CSAT-5060 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CSAT-5060. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Comtech EF Data CSAT-5060 satellite transceiver

Monitoring Examples

An administrator checks csat5060UnitRedundancyMode and csat5060TxFrequency to confirm redundancy state and RF configuration on a Comtech EF Data CSAT-5060 satellite transceiver.

What Can Be Monitored

RF transmit/receive configuration and redundancy state

Imported Objects

From ComtechEFData

comtechEFData

MODULE-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
csat5060	1.3.6.1.4.1.6247.29			Module Identity for CSAT-5060 Transceiver.
csat5060Objects	1.3.6.1.4.1.6247.29.1
INT csat5060Select	1.3.6.1.4.1.6247.29.1.1	INTEGER	read-write	CSAT Select. Use option csat1 for StandAlone unit.
csat5060SystemInfo	1.3.6.1.4.1.6247.29.1.2
OCT csat5060ModelNumberSoftwareVer	1.3.6.1.4.1.6247.29.1.2.1	OCTET STRING	read-only	CSAT Model Number, Software Version. (RET?)
OCT csat5060UnitSerialNumber	1.3.6.1.4.1.6247.29.1.2.2	OCTET STRING	read-only	CSAT Unit Serial Number. (RSN?)
OCT csat5060DeviceTime	1.3.6.1.4.1.6247.29.1.2.3	OCTET STRING	read-write	CSAT Unit Time. (TIM?, TIM=) A time in the form hh:mm:ss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59)
OCT csat5060DeviceDate	1.3.6.1.4.1.6247.29.1.2.4	OCTET STRING	read-write	CSAT Unit Date. (DAY?, DAY=) A date in the form dd/mm/yy, where dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99)
OCT csat5060CircuitID	1.3.6.1.4.1.6247.29.1.2.5	OCTET STRING	read-write	CSAT Circuit ID. (CID?, CID=)
csat5060UnitParameters	1.3.6.1.4.1.6247.29.1.3
INT csat5060UnitMuteMode	1.3.6.1.4.1.6247.29.1.3.1	INTEGER	read-write	CSAT Unit Mute Mode. (MUT?, MUT=)
INT csat5060UnitColdStart	1.3.6.1.4.1.6247.29.1.3.2	INTEGER	read-write	CSAT Unit Cold Start. (CLD?, CLD=)
INT csat5060UnitAutoFaultRecovery	1.3.6.1.4.1.6247.29.1.3.3	INTEGER	read-write	CSAT Auto Fault Recovery. (AFR?, AFR=)
INT csat5060UnitExtRefFaultLogic	1.3.6.1.4.1.6247.29.1.3.4	INTEGER	read-write	CSAT External Reference Fault Logic. (XRF?, XRF=)
INT csat5060UnitRefOscAdjust	1.3.6.1.4.1.6247.29.1.3.5	INTEGER	read-write	CSAT Reference Oscillator Adjust. (REF?, REF=)
INT csat5060UnitLNACurrentSource	1.3.6.1.4.1.6247.29.1.3.6	INTEGER	read-write	CSAT LNA Current Source. (LCS?, LCS=)
INT csat5060UnitLNACurrentWindow	1.3.6.1.4.1.6247.29.1.3.7	INTEGER	read-write	CSAT LNA Current Window. (LCW?, LCW=)
INT csat5060UnitLNAFaultLogic	1.3.6.1.4.1.6247.29.1.3.8	INTEGER	read-write	CSAT LNA Fault Logic. (LFL?, LFL=)
INT csat5060UnitRedundancyMode	1.3.6.1.4.1.6247.29.1.3.9	INTEGER	read-write	CSAT Redundancy Mode. Only Supported by ONLINE Unit. (RAM?, RAM=)
INT csat5060UnitRedForceSwitch	1.3.6.1.4.1.6247.29.1.3.10	INTEGER	read-write	CSAT Force Redundancy Switch. Write-ONLY. (RTG=)
csat5060TxParameters	1.3.6.1.4.1.6247.29.1.4
INT csat5060TxFrequency	1.3.6.1.4.1.6247.29.1.4.1	INTEGER	read-write	CSAT TX Frequency in KHz. Frequency divisible by 1MHz or 2.5MHz is allowed. (UFQ?, UFQ=)
INT csat5060TxAttenuation	1.3.6.1.4.1.6247.29.1.4.2	INTEGER	read-write	CSAT TX Attenuation. Value Multiplied by 100. (UAT?, UAT=)
INT csat5060TxAmplifier	1.3.6.1.4.1.6247.29.1.4.3	INTEGER	read-write	CSAT TX Amplifier. (AMP?, AMP=)
INT csat5060TxMute	1.3.6.1.4.1.6247.29.1.4.4	INTEGER	read-write	CSAT TX Mute. (UMU?, UMU=)
INT csat5060TxSlopeMode	1.3.6.1.4.1.6247.29.1.4.5	INTEGER	read-write	CSAT TX Slope Mode. (USM?, USM=)
INT csat5060TxSlopeValue	1.3.6.1.4.1.6247.29.1.4.6	INTEGER	read-write	CSAT TX Slope Value. Value Multiplied by 10. (USA?, USA=)
INT csat5060TxGainOffset	1.3.6.1.4.1.6247.29.1.4.7	INTEGER	read-write	CSAT TX Gain Offset. Value Multiplied by 100. (UGO?, UGO=)
csat5060RxParameters	1.3.6.1.4.1.6247.29.1.5
INT csat5060RxFrequency	1.3.6.1.4.1.6247.29.1.5.1	INTEGER	read-write	CSAT RX Frequency in KHz. Frequency divisible by 1MHz or 2.5MHz is allowed. (DFQ?, DFQ=)
INT csat5060RxAttenuation	1.3.6.1.4.1.6247.29.1.5.2	INTEGER	read-write	CSAT RX Attenuation. Value Multiplied by 100. (DAT?, DAT=)
INT csat5060RxMute	1.3.6.1.4.1.6247.29.1.5.3	INTEGER	read-write	CSAT RX Mute. (DMU?, DMU=)
INT csat5060RxSlopeMode	1.3.6.1.4.1.6247.29.1.5.4	INTEGER	read-write	CSAT RX Slope Mode. (DSM?, DSM=)
INT csat5060RxSlopeValue	1.3.6.1.4.1.6247.29.1.5.5	INTEGER	read-write	CSAT RX Slope Value. Value Multiplied by 10. (DSA?, DSA=)
INT csat5060RxGainOffset	1.3.6.1.4.1.6247.29.1.5.6	INTEGER	read-write	CSAT RX Gain Offset. Value Multiplied by 100. (DGO?, DGO=)
csat5060UnitStatus	1.3.6.1.4.1.6247.29.1.6
INT csat5060OnlineState	1.3.6.1.4.1.6247.29.1.6.1	INTEGER	read-only	CSAT Online Status. (ONL?)
OCT csat5060MaintenanceParameters	1.3.6.1.4.1.6247.29.1.6.2	OCTET STRING	read-only	CSAT Concise Maintenance Parameters. (CMS?) CMS=aaa.abbb.bccc.cddd.deee.efff.fggg.ghhh.hiii.ijjj.jkkk.klll.lmmm.mnnn.nooo.oppp.p where: aaa.a = 24V Power Supply bbb.b = 20V Power Supply ccc.c = 12V Power Supply ddd.d = 10V Power Supply eee.e = +5V Power Supply fff.f = -5V Power Supply ggg.g = TX Synthesizer Tuning Voltage hhh.h = TX IFLO Tuning Voltage iii.i = RX Synthesizer Tuning Voltage jjj.j = RX IFLO Tuning Voltage kkk.k = Reference Tuning Voltage lll.l = LNA Current in milliamps mmm.m = Fan Current in milliamps nnn.n = Up Conv Heat Sink Temperature ooo.o = RF Output Power in dB ppp.p = Down Converter Temperature Note: Value is xxx.x if not available
INT csat5060UnitFaults	1.3.6.1.4.1.6247.29.1.6.3	INTEGER	read-only	CSAT Concise Alarm Status. (CAS?) The return integer value in binary represents CAS? response string. CAS=abcdefghijklmnopqrs, where: a thru s = 0 or 1, 0 = OK 1 = FT a = 24V Power Supply Alarm b = 20V Power Supply Alarm c = 12V Power Supply Alarm d = 10V Power Supply Alarm e = +5V Power Supply Alarm f = -5V Power Supply Alarm g = TX Synthesizer Lock Detect Alarm h = TX IFLO Lock Detect Alarm I = RX Synthesizer Lock Detect Alarm j = RX IFLO Lock Detect Alarm k = Reference Lock Detect Alarm l = LNA Current Alarm m = Fan Current Alarm n = Temperature Alarm o = HPA Thermal Shutdown Alarm p = Internal IIC-bus Alarm q = EEPROM checksum Alarm r = NVRAM/RTC Low Battery Alarm s = Redundancy switch alarm For Example, return value 128 (in decimal) = 0b0000000000010000000, where l position is 1 means there is a Rx Synthesizer Lock Detect Alarm, other bits are 0s meas no other alarms.
csat5060Logs	1.3.6.1.4.1.6247.29.1.7
INT csat5060NumberUnreadEvents	1.3.6.1.4.1.6247.29.1.7.1	INTEGER	read-only	CSAT Number of Unread Events. (TNA?)
OCT csat5060RetrieveNext5Events	1.3.6.1.4.1.6247.29.1.7.2	OCTET STRING	read-only	CSAT Retrieve Next 5 Events. (LNA?)
INT csat5060ClearEventsLog	1.3.6.1.4.1.6247.29.1.7.3	INTEGER	read-write	CSAT Clear Events Log. Write-ONLY. (CAA=)
INT csat5060InitializeEventsPointer	1.3.6.1.4.1.6247.29.1.7.4	INTEGER	read-write	CSAT Initialize Events Pointer. Write-ONLY. (IAP=)
csat5060Conformance	1.3.6.1.4.1.6247.29.2
csat5060Groups	1.3.6.1.4.1.6247.29.2.1
csat5060ObjectsGroup	1.3.6.1.4.1.6247.29.2.1.1			CSAT-5060 Objects Group.
csat5060Compliances	1.3.6.1.4.1.6247.29.2.2
csat5060Compliance	1.3.6.1.4.1.6247.29.2.2.1			CSAT-5060 Compliance.

RFC description

Configuration and system information for CSAT-5060 satellite transceiver units.

Start monitoring Comtech EF Data CSAT-5060 satellite transceiver with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CSAT-5060

What Is CSAT-5060?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description