All MIBs › CSAT-5060 › csat5060UnitFaults
csat5060UnitFaults
Module: CSAT-5060
OID (symbolic): CSAT-5060::csat5060UnitFaults
OID (numeric): 1.3.6.1.4.1.6247.29.1.6.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: CSAT Concise Alarm Status. (CAS?) The return integer value in binary represents CAS? response string.
CAS=abcdefghijklmnopqrs, where: a thru s = 0 or 1, 0 = OK 1 = FT a = 24V Power Supply Alarm b = 20V Power Supply Alarm c = 12V Power Supply Alarm d = 10V Power Supply Alarm e = +5V Power Supply Alarm f = -5V Power Supply Alarm g = TX Synthesizer Lock Detect Alarm h = TX IFLO Lock Detect Alarm I = RX Synthesizer Lock Detect Alarm j = RX IFLO Lock Detect Alarm k = Reference Lock Detect Alarm l = LNA Current Alarm m = Fan Current Alarm n = Temperature Alarm o = HPA Thermal Shutdown Alarm p = Internal IIC-bus Alarm q = EEPROM checksum Alarm r = NVRAM/RTC Low Battery Alarm s = Redundancy switch alarm
For Example, return value 128 (in decimal) = 0b0000000000010000000, where l position is 1 means there is a Rx Synthesizer Lock Detect Alarm, other bits are 0s meas no other alarms.
What is csat5060UnitFaults?
This read-only value encodes the unit's overall alarm status as a bitfield, retrieved via the CAS? command, where each bit corresponds to a specific fault such as a power supply alarm or a synthesizer lock-detect alarm being OK or in fault. Admins decode this single integer to quickly determine which specific subsystem, if any, is currently alarming without polling many separate objects. For example, a nonzero csat5060UnitFaults value with the TX synthesizer lock-detect bit set would tell an admin the transmit synthesizer has lost lock and needs attention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6247.29.1.6.3 snmpwalk -v2c -c public <target> CSAT-5060::csat5060UnitFaults
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6247.29.1.6.3.1 snmpget -v2c -c public <target> CSAT-5060::csat5060UnitFaults.1
Start monitoring Comtech EF Data CSAT-5060 satellite transceiver with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CSAT-5060::csat5060UnitFaults OID value, configure state conditions and alerts, and monitor any Comtech EF Data CSAT-5060 satellite transceiver from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6247 | comtechEFData | ComtechEFData |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6247.29 | csat5060 | CSAT-5060 |
| 1.3.6.1.4.1.6247.29.1 | csat5060Objects | CSAT-5060 |
| 1.3.6.1.4.1.6247.29.1.6 | csat5060UnitStatus | CSAT-5060 |
| 1.3.6.1.4.1.6247.29.1.6.3 | csat5060UnitFaults | CSAT-5060 |