CPQHSV360V11-MIB

Description: Provides management objects for the Compaq/HP StorageWorks HSV360 v11 SAN array controller.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

CPQHSV360V11-MIB is a Compaq/HP vendor MIB for managing the HSV360 v11 StorageWorks Enterprise Virtual Array controller, a mid-tier SAN array controller in the Compaq/HP EVA product line. It exposes management objects covering controller operational state, virtual disk/LUN configuration and status, and disk group health for arrays built on HSV360 controllers. Its monitoring emphasis is on storage hardware status: whether the controller is healthy or has failed over to its partner, whether virtual disks are online, degraded, or rebuilding, and whether underlying disk groups have sufficient redundancy, all key signals of SAN array fault conditions. It follows the same structural conventions as sibling HSV-series MIBs (HSV340/HSV400) and the broader Compaq/HP enterprise MIB tree. It is deployed in enterprise SAN environments where HSV360 controllers provide block storage to servers over Fibre Channel. Engineers can download the CPQHSV360V11-MIB file directly to load it into their MIB browser.

An administrator would check controller status objects to confirm both controllers in an active/standby or active/active pair are healthy, and inspect virtual disk status to catch a LUN reported as degraded, meaning a member disk has failed and a rebuild is in progress. No sample objects were provided for this MIB, so exact names cannot be cited; this reflects the general controller/virtual-disk monitoring pattern common to Compaq/HP HSV-series array MIBs.