CPQHSV450V11-MIB

Description: Provides monitoring and status objects for the Compaq/HP StorageWorks HSV450 v11 array controller.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

CPQHSV450V11-MIB is a vendor-specific SNMP module from HP/Compaq for the StorageWorks HSV450 SAN array controller (version 11 of the management agent instrumentation), another model in the HP EVA storage array family. It provides monitoring and status objects for the array controller, covering its operational health and configuration within the SAN. Its monitoring value is centered on storage hardware status: administrators use it to detect controller faults, degraded operational states, and other conditions that would indicate the HSV450 controller is not functioning normally, which is critical for preventing storage outages. As with other HSV-family MIBs it is a version/model-specific counterpart to CPQHSV-MIB and related HP StorageWorks MIBs, and is typically used alongside host-side multipathing and HBA status tools. It is typically deployed in enterprise data centers running HP EVA/HSV450 SAN arrays for centralized block storage. Network engineers evaluating or troubleshooting this functionality can download the CPQHSV450V11-MIB file directly to load it into their MIB browser.

No sample runtime objects were supplied for this module, so specific object names cannot be grounded here; in practice an administrator would expect to poll HSV450 controller status objects to detect a failed-over, degraded, or offline controller condition that would signal an impending or active storage hardware fault.