CONTROLLER-MIB

All MIBs › CONTROLLER-MIB

Organization: www.ucopia.com

Last Updated: 2017-01-24

Category: Device Management

Description: Provides generic controller device management objects for hardware controller status and configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CONTROLLER-MIB?

CONTROLLER-MIB is a vendor MIB (likely from a portal/unified-communications software appliance vendor, given the "ucp" object prefix) providing generic controller-device management objects covering both hardware sensors and application-service status. It exposes environmental/hardware metrics such as cpuTemperature and diskTemperature alongside software-oriented data like totalConnectedUsers, licenseUsers, and the operational status of key services (webServerService, sqlServerService, urlSnifferService, portalService, webProxyService). This makes it explicitly useful for monitoring both hardware health (CPU/disk temperature) and software/service health (whether the web server, SQL server, and portal services are running) of the controller appliance, plus high-availability cluster state via highAvailabilityStatus. It defines its own conformance groups (ucpMIBConformance, ucpMIBGroups) and notification objects, suggesting it is largely self-contained though it may share general SNMPv2 conformance conventions with other enterprise MIBs. It would typically be deployed on a unified communications/portal controller appliance where operators need a single SNMP view of hardware temperature, licensed-user counts, and dependent-service availability. Engineers can download the CONTROLLER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CONTROLLER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ucopia Communications Wi-Fi/hotspot access controller — identified via the module's ORGANIZATION field (www.ucopia.com) and 'ucp' object prefix

Monitoring Examples

An operator would poll cpuTemperature and diskTemperature to catch overheating before it causes a shutdown, and check webServerService, sqlServerService, and portalService to confirm the controller's core software stack is up. totalConnectedUsers and licenseUsers let an admin see if the appliance is approaching its licensed user cap, while highAvailabilityStatus reveals whether the controller has failed over to a standby node. A service object flipping to a down state while cpuTemperature remains normal would point to a software crash rather than a hardware fault.

What Can Be Monitored

CPU temperature
disk temperature
connected user count
license user count
high-availability status
web/SQL/portal service status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

How to Use in IPNetwork Monitor

Example using totalConnectedUsers OID:

Select an Ucopia Communications Wi-Fi/hotspot access controller appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type totalConnectedUsers into the Find box to locate it in the OID tree, then select it and click OK. It reports a value which indicates the number of connected users on this controller. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ucopia	1.3.6.1.4.1.31218			Re-design notifications
ucpMIBConformance	1.3.6.1.4.1.31218.1
ucpMIBGroups	1.3.6.1.4.1.31218.1.1
statesGroup	1.3.6.1.4.1.31218.1.1.1			The objects relating to controller states.
servicesGroup	1.3.6.1.4.1.31218.1.1.2			The objects relating to controller services.
notificationsGroup	1.3.6.1.4.1.31218.1.1.3			The notifications relating to the services status of the controller.
ucpMIBCompliances	1.3.6.1.4.1.31218.1.2
ucpCompliance	1.3.6.1.4.1.31218.1.2.2			The compliance statement for the controller MIB.
ucpNotifications	1.3.6.1.4.1.31218.2
ucpNotificationPrefix	1.3.6.1.4.1.31218.2.0
NTF ucpServiceFaultStateNotification	1.3.6.1.4.1.31218.2.0.1			A notification, used to alert that a service has entered a fault state
ucpState	1.3.6.1.4.1.31218.3
G32 totalConnectedUsersEx	1.3.6.1.4.1.31218.3.1	Gauge32	read-only	A value which indicates the number of connected users on this controller.
I32 debugValue	1.3.6.1.4.1.31218.3.2	Integer32	read-write	A value which indicates the debug level. Numerical Severity 0 Emergency: system is unusable 1 Alert: action must be taken immediately 2 Critical: critical conditions 3 Error: error conditions 4 Warning: warning conditions 5 Notice: normal but significant condition 6 Informational: informational messages 7 Debug: debug-level messages
I32 cpuTemperature	1.3.6.1.4.1.31218.3.3	Integer32	read-only	Processor temperature (in degree Celsius)
I32 diskTemperature	1.3.6.1.4.1.31218.3.4	Integer32	read-only	Disk temperature (in degree Celsius)
I32 licenseUsers	1.3.6.1.4.1.31218.3.5	Integer32	read-only	The number of users that the license allow to be connected simulteaneously.
STR sysObjectDescription	1.3.6.1.4.1.31218.3.6	DisplayString	read-only	The description of 'what kind of the box' is being managed.
INT highAvailabilityStatus	1.3.6.1.4.1.31218.3.7	INTEGER	read-only	Indicates the controller current status in high availability cluster (0) Standalone (1) Master (HA) (2) Active node (HA) (3) Passive node (HA) (4) FAULT (HA)
serviceStatus	1.3.6.1.4.1.31218.4
INT webServerService	1.3.6.1.4.1.31218.4.1	INTEGER	read-only	Indicates the status of Web Server service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT sqlServerService	1.3.6.1.4.1.31218.4.2	INTEGER	read-only	Indicates the status of SQL Server service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT urlSnifferService	1.3.6.1.4.1.31218.4.3	INTEGER	read-only	Indicates the status of URL sniffer service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT portalService	1.3.6.1.4.1.31218.4.4	INTEGER	read-only	Indicates the status of Portal service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT webProxyService	1.3.6.1.4.1.31218.4.5	INTEGER	read-only	Indicates the status of Web Proxy service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT autodisconnectService	1.3.6.1.4.1.31218.4.6	INTEGER	read-only	Indicates the status of Autodisconnect service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT printingServerService	1.3.6.1.4.1.31218.4.7	INTEGER	read-only	Indicates the status of Printing Server service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT dhcpServerService	1.3.6.1.4.1.31218.4.8	INTEGER	read-only	Indicates status of DHCP server. (1) running service is running (2) stopped service is stopped or crashed (3) disabled service is disabled by configuration.
INT dnsServerService	1.3.6.1.4.1.31218.4.9	INTEGER	read-only	Indicates the status of DNS Server service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT staticIpManagerService	1.3.6.1.4.1.31218.4.10	INTEGER	read-only	Indicates the status of Static IP Manager service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT highAvailabilityService	1.3.6.1.4.1.31218.4.11	INTEGER	read-only	Indicates the status of High-Availability service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT ldapDirectoryService	1.3.6.1.4.1.31218.4.12	INTEGER	read-only	Indicates the status of LDAP Directory service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT ldapReplicationManagerService	1.3.6.1.4.1.31218.4.13	INTEGER	read-only	Indicates the status of LDAP Replication Manager service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT timeServerService	1.3.6.1.4.1.31218.4.14	INTEGER	read-only	Indicates the status of Time Server service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT radiusServerService	1.3.6.1.4.1.31218.4.15	INTEGER	read-only	Indicates the status of Radius Server service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT sambaService	1.3.6.1.4.1.31218.4.16	INTEGER	read-only	Indicates the status of Samba service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT sshService	1.3.6.1.4.1.31218.4.17	INTEGER	read-only	Indicates the status of Ssh service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT syslogService	1.3.6.1.4.1.31218.4.18	INTEGER	read-only	Indicates the status of Syslog service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT usersLogService	1.3.6.1.4.1.31218.4.19	INTEGER	read-only	Indicates the status of Users Log service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.
INT pmsClientService	1.3.6.1.4.1.31218.4.20	INTEGER	read-only	Indicates the status of PMSClient service (1) Running, service is running (2) Stopped, service is stopped or crashed (3) Disabled, service is disabled by configuration.

RFC description

Provides SNMP management of UCOPIA controller system states, services, user connections, and hardware status.

Start monitoring Ucopia Communications Wi-Fi/hotspot access controller appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CONTROLLER-MIB