| OID symbolic | OID numeric | Type | Access | Description |
|---|
| hpSwitchImage | 1.3.6.1.4.1.11.2.14.11.5.1.59 | | | This MIB describes information like build
date, image version, build number, image size
for the images in the flash(non-volatile
memory). This mib will also give similar
details for running software version. |
| hpSwitchImageObject | 1.3.6.1.4.1.11.2.14.11.5.1.59.1 | | | |
| INT hpSwitchDefaultBoot | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.1 | INTEGER | read-only | This object describes the default flash boot image.
It may be either primary or secondary image. |
| STR hpSwitchBootRomVersion | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.2 | DisplayString | read-only | This object describes version details of
Monitor Rom Console. |
| hpSwitchFlashImageTable | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.3 | | not-accessible | Each entry of this table describes
information like size of image, build date,
image version and build number for the images
that are present in the flash. Build number
is accessible only in debug build. |
| hpSwitchFlashImageEntry | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1 | | not-accessible | Each entry describes information like size
of image, build date, version and build
number. Build number is accessible only in
debug build. |
| INT hpSwitchFlashImageType | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.1 | INTEGER | not-accessible | This object describes flash image type. It may be
primary or secondary image. |
| U32 hpSwitchFlashImageSize | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.2 | Unsigned32 | read-only | This object describes the image size in
bytes. |
| STR hpSwitchFlashImageBuildDate | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.3 | DisplayString | read-only | This object describes the date on which this
image is built. |
| STR hpSwitchFlashImageVersion | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.4 | DisplayString | read-only | This object describes the version number. |
| STR hpSwitchFlashImageBuildNumber | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.3.1.5 | DisplayString | read-only | This object describes the build number. This
object is accessible only in debug build. |
| hpSwitchMgmtModuleVersionTable | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4 | | not-accessible | Each entry of this table describes
information like status, image directory
path, build date, image version, image build
number, boot-image type, build options and
watchdog status of the running software version for
management modules.
In switches other than 8200, only
one management module is present. In 8200
switches, two management modules are
present. |
| hpSwitchMgmtModuleVersionEntry | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1 | | not-accessible | This entry describes information like status,
image directory, build date, image version,
image build number, boot-image type, build
options and watchdog status of the running software
version for management modules. |
| INT hpSwitchMgmtModuleID | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.1 | INTEGER | not-accessible | This module ID object is used to uniquely
identify the entry in the table. |
| INT hpSwitchMgmtModuleStatus | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.2 | INTEGER | read-only | This object describes the status of the running
software version for management module.
This status can be active,
disabled, standby, offline, failed, syncing or
unknown. |
| STR hpSwitchMgmtModuleDirectory | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.3 | DisplayString | read-only | This object describes the directory path
of the running software version. |
| STR hpSwitchMgmtModuleDate | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.4 | DisplayString | read-only | This object describes the build date
of the running software version. |
| STR hpSwitchMgmtModuleVersion | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.5 | DisplayString | read-only | This object describes the version number
of the running software version. |
| STR hpSwitchMgmtModuleBuildNumber | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.6 | DisplayString | read-only | This object describes the build number of
the running software version. This object is
accessible only in debug build. |
| INT hpSwitchMgmtModuleBootImage | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.7 | INTEGER | read-only | This object gives the image type in which switch
is booted up recently. It may be primary or
secondary image. It gives unknown if neither
primary nor secondary image is present. |
| INT hpSwitchMgmtModuleBuildOptions | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.8 | INTEGER | read-only | This object describes the build options of
the running software version. |
| INT hpSwitchMgmtModuleWatchDog | 1.3.6.1.4.1.11.2.14.11.5.1.59.1.4.1.9 | INTEGER | read-only | This object describes whether watchdog is
enabled or disabled for the running software version.
This gives unknown if not available. |
| hpSwitchImageConformance | 1.3.6.1.4.1.11.2.14.11.5.1.59.2 | | | |
| hpSwitchImageGroups | 1.3.6.1.4.1.11.2.14.11.5.1.59.2.1 | | | |
| hpSwitchFlashImagesGroup | 1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.1 | | | A mandatory group which is required to
give the details like image size, image
build date, image version, default boot
image for the images in the flash. This
also gives version of monitor rom console. |
| hpSwitchMgmtModuleGroup | 1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.2 | | | A mandatory group which is required to
give the details like status, boot
directory-path, image build date, image
version and boot-image of the running
software version for the management
modules. |
| hpSwitchBuildGroup | 1.3.6.1.4.1.11.2.14.11.5.1.59.2.1.3 | | | This optional group is accessible only
in debug build. |
| hpSwitchImageCompliances | 1.3.6.1.4.1.11.2.14.11.5.1.59.2.2 | | | |
| hpSwitchImageCompliance | 1.3.6.1.4.1.11.2.14.11.5.1.59.2.2.1 | | | The compliance statement is for
hpSwitchFlashImagesGroup,
hpSwitchMgmtModuleGroup and
hpSwitchBuildGroup. |
