ASCEND-MIBSYS1-MIB

All MIBs › ASCEND-MIBSYS1-MIB

Category: Device Management, Vendor: Ascend/Lucent

Description: Manages system-level parameters including hostname, contact, and software versions on Ascend equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBSYS1-MIB?

ASCEND-MIBSYS1-MIB is an Ascend Communications (later Lucent) proprietary MIB holding base system identity and console-management profile settings on Ascend MAX/Pipeline access equipment. Its profile table records the system name, contact, and location strings alongside console terminal rate, console access, console security level, and remote system management enable state. As a configuration/inventory MIB it lets an administrator confirm basic device identity fields and console security posture are set as expected. It is deployed on Ascend/Lucent WAN access routers as part of the base system profile. Engineers can download the ASCEND-MIBSYS1-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBSYS1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend Communications (Lucent) MAX/Pipeline WAN access routers

Monitoring Examples

An administrator audits systemProfile-ConsoleSecurity and systemProfile-SystemRmtMgmt across a fleet of routers to confirm remote management access is restricted to the intended security level.

What Can Be Monitored

system identity fields
console security level and remote management enable state

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibsystemProfile	1.3.6.1.4.1.529.23.125
mibsystemProfile_StatusNumberEntry	1.3.6.1.4.1.529.23.125.2.1		not-accessible	A mibsystemProfile__status_number entry containing objects that maps to the parameters of mibsystemProfile__status_number profile.
mibsystemProfile_StatusNumberTable	1.3.6.1.4.1.529.23.125.2		not-accessible	A list of mibsystemProfile__status_number profile entries.
mibsystemProfileEntry	1.3.6.1.4.1.529.23.125.1.1		not-accessible	A mibsystemProfile entry containing objects that maps to the parameters of mibsystemProfile profile.
mibsystemProfileTable	1.3.6.1.4.1.529.23.125.1		not-accessible	A list of mibsystemProfile profile entries.
INT systemProfile_Action_o	1.3.6.1.4.1.529.23.125.1.1.52	INTEGER	read-write
INT systemProfile_AnalogEncoding	1.3.6.1.4.1.529.23.125.1.1.26	INTEGER	read-write	Sets the encoding standard for digitized analog data to either u-Law or A-Law. Universally sets all codecs on the unit to the value selected. Defaults to u-Law for T1, A-Law for E1 interfaces.
INT systemProfile_AutoLogout	1.3.6.1.4.1.529.23.125.1.1.16	INTEGER	read-write	When TRUE select the default security profile on loss of CD/DTR from the main console port.
STR systemProfile_BootSrVersion	1.3.6.1.4.1.529.23.125.1.1.43	DisplayString	read-only	Place for tntsrb, the shelf controller boot loader, to provide its version. Boot loader updates the field with its version on every system reset
INT systemProfile_CallByCall	1.3.6.1.4.1.529.23.125.1.1.45	INTEGER	read-write	PRI Called Party element's Network Specific Facility for Call-by-Call.
INT systemProfile_CallRoutingSortMethod	1.3.6.1.4.1.529.23.125.1.1.31	INTEGER	read-write	How to sort the Call Routing table for analog calls.
INT systemProfile_Console	1.3.6.1.4.1.529.23.125.1.1.6	INTEGER	read-write	A MenuType specifying the type of interface to use on the console port.
INT systemProfile_ConsoleSecurity	1.3.6.1.4.1.529.23.125.1.1.7	INTEGER	read-write	Serial console security for the control port.
STR systemProfile_Contact	1.3.6.1.4.1.529.23.125.1.1.3	DisplayString	read-write	The name of the contact for this device. SNMP readable.
INT systemProfile_ControlBusType	1.3.6.1.4.1.529.23.125.1.1.42	INTEGER	read-write	How to send control bus messages. This attribute exists only when the shelf-controller-type is not SLAVE.
INT systemProfile_Country	1.3.6.1.4.1.529.23.125.1.1.46	INTEGER	read-write	Country in which the system is located.
INT systemProfile_DelayDualPortDialing	1.3.6.1.4.1.529.23.125.1.1.24	INTEGER	read-write	TRUE if we should delay between dual port calls, FALSE if they should be placed at the same time.
INT systemProfile_DigitalCallRoutingSortMethod	1.3.6.1.4.1.529.23.125.1.1.32	INTEGER	read-write	How to sort the Call Routing table for digital calls.
INT systemProfile_DmSubaddress	1.3.6.1.4.1.529.23.125.1.1.12	INTEGER	read-write	sub-address assigned to digital modem connections.
STR systemProfile_EditNumber	1.3.6.1.4.1.529.23.125.1.1.25	DisplayString	read-write	The menu number of the default edit screen.
INT systemProfile_ExactMatchCallRouting	1.3.6.1.4.1.529.23.125.1.1.33	INTEGER	read-write	If yes, the system will search for an exact match of call-route profile parameters when selecting devices. Wildcard matches will be accepted only after all 4 quadrants have been searched. (APX only)
INT systemProfile_IdleLogout	1.3.6.1.4.1.529.23.125.1.1.17	INTEGER	read-write	When non-zero select the default security profile after this value of minutes with no keyboard activity.
INT systemProfile_IgnoreLineup	1.3.6.1.4.1.529.23.125.1.1.51	INTEGER	read-write	If ignore-lineup in line config profile is set to SYSTEM DEFINED, then this will take precedence.
INT systemProfile_IncCallDistrib	1.3.6.1.4.1.529.23.125.1.1.50	INTEGER	read-write	Route incoming calls to first available valid port or the least used among a set of ports.
INT systemProfile_Index_o	1.3.6.1.4.1.529.23.125.1.1.1	INTEGER	read-only
STR systemProfile_JamFileComponents_JamFile1	1.3.6.1.4.1.529.23.125.1.1.53	DisplayString	read-only	File name of the first JAM file's component
STR systemProfile_JamFileComponents_JamFile2	1.3.6.1.4.1.529.23.125.1.1.54	DisplayString	read-only	File name of the second JAM file's component
STR systemProfile_JamFileComponents_JamFile3	1.3.6.1.4.1.529.23.125.1.1.55	DisplayString	read-only	File name of the third JAM file's component
STR systemProfile_JamFileComponents_JamFile4	1.3.6.1.4.1.529.23.125.1.1.56	DisplayString	read-only	File name of the fourth JAM file's component
STR systemProfile_JamFileComponents_JamFile5	1.3.6.1.4.1.529.23.125.1.1.57	DisplayString	read-only	File name of the fifth JAM file's component
STR systemProfile_JamFileComponents_JamFile6	1.3.6.1.4.1.529.23.125.1.1.58	DisplayString	read-only	File name of the sixth JAM file's component
INT systemProfile_LanSubaddress	1.3.6.1.4.1.529.23.125.1.1.11	INTEGER	read-write	sub-address assigned to sync lan connections.
STR systemProfile_Location	1.3.6.1.4.1.529.23.125.1.1.4	DisplayString	read-write	The location of this device. SNMP readable.
INT systemProfile_MasterShelfController	1.3.6.1.4.1.529.23.125.1.1.35	INTEGER	read-write	Master shelf controller number. This attribute exists only when the shelf-controller-type is SLAVE. Note: This variable is not applicable to the APX 8000.
INT systemProfile_MaxDialoutTime	1.3.6.1.4.1.529.23.125.1.1.21	INTEGER	read-write	The max time in Sec, system will wait for Call Setup Complete
INT systemProfile_MaxSystemDS0Mins	1.3.6.1.4.1.529.23.125.1.1.20	INTEGER	read-write	Sets the high water billing mark at which all originating switched connections are brought down.
INT systemProfile_ModemPriNumberingPlanId	1.3.6.1.4.1.529.23.125.1.1.38	INTEGER	read-write	PRI Called Party element's Numbering-Plan-ID value for outgoing modem calls.
INT systemProfile_ModemPriTypeOfNumber	1.3.6.1.4.1.529.23.125.1.1.37	INTEGER	read-write	PRI Called Party element's Type-Of-Number value for outgoing modem calls.
STR systemProfile_Name	1.3.6.1.4.1.529.23.125.1.1.2	DisplayString	read-write	The name of the system given by the user, a standard null terminated ASCII string.
INT systemProfile_NasPortFormat	1.3.6.1.4.1.529.23.125.1.1.59	INTEGER	read-write	Specifies NAS-Port-Format used to calculate the NAS-Port-ID. When set to 'not-applicable', indicates that the NAS Port Format is determined by the settings in the 'new-nas-port-id-format' field. Defaults to 'not-applicable'.
INT systemProfile_NewNasPortIdFormat	1.3.6.1.4.1.529.23.125.1.1.36	INTEGER	read-write	Field is deprecated; use the 'nas-port-format' field to specify the NAS port format. Will be used only if 'nas-port-format' is set to 'not-applicable'. TRUE if new NAS port ID format is used, FALSE if old NAS Port ID is used. On the TNT product family the new NAS port ID format is used by default. The old format cannot be used for multi-shelf systems or if any line cards are in a slot greater than the twelfth position.
INT systemProfile_NumDigitsTrunkGroups	1.3.6.1.4.1.529.23.125.1.1.15	INTEGER	read-write	Specify number of digits TrunkGroups support.
INT systemProfile_oDS0MinRst	1.3.6.1.4.1.529.23.125.1.1.19	INTEGER	read-write	Has three choices: Off, 24Hr or Monthly. When enabled, the following maxSystemDS0Mins is the high water mark at which all switched connections originating on the system will be taken down.
INT systemProfile_P50SwitchUsage	1.3.6.1.4.1.529.23.125.1.1.18	INTEGER	read-write	What the P50 switch does.
INT systemProfile_ParallelDialing	1.3.6.1.4.1.529.23.125.1.1.22	INTEGER	read-write	The number of simultaneous DS0 channel outdials the switch allows.
INT systemProfile_PermConnUpdMode	1.3.6.1.4.1.529.23.125.1.1.40	INTEGER	read-write	Enables nonintrusive remote update of permanent connections' configurations. 'Changed' means that only changed connections will be torn down and reestablished, 'All' means all existing permanent connections will be turn down and then reestablished only if they are fetched from the RADIUS server again
INT systemProfile_PotsDigitTimeout	1.3.6.1.4.1.529.23.125.1.1.47	INTEGER	read-write	POTS interdigit timeout.
INT systemProfile_SerialSubaddress	1.3.6.1.4.1.529.23.125.1.1.10	INTEGER	read-write	sub-address assigned to serial port connections.
INT systemProfile_SessionidBase	1.3.6.1.4.1.529.23.125.1.1.27	INTEGER	read-write	The base session ID value
INT systemProfile_ShelfControllerType	1.3.6.1.4.1.529.23.125.1.1.34	INTEGER	read-write	Used to define the role of this controller in a single-shelf or multi-shelf system. Note: This variable is not applicable to the APX 8000.
INT systemProfile_SingleFileIncoming	1.3.6.1.4.1.529.23.125.1.1.23	INTEGER	read-write	Should the calls be treated as a single-file list, or in parallel. PictureTel wants parallel others want single-file.
STR systemProfile_StatusNumber	1.3.6.1.4.1.529.23.125.2.1.3	DisplayString	read-write	An array of status screen number entries used to specify the default status screen layout.
INT systemProfile_StatusNumber_Index_o	1.3.6.1.4.1.529.23.125.2.1.1	INTEGER	read-only
INT systemProfile_StatusNumber_Index1_o	1.3.6.1.4.1.529.23.125.2.1.2	INTEGER	read-only
INT systemProfile_SubAddressMode	1.3.6.1.4.1.529.23.125.1.1.9	INTEGER	read-write	Selects system wide sub-address support. See mibglob.mdf for details.
INT systemProfile_SupportDbcs	1.3.6.1.4.1.529.23.125.1.1.49	INTEGER	read-write	TRUE if we should support DBCS character set, FALSE if not.
STR systemProfile_SysModemProfile_oATAnswerString	1.3.6.1.4.1.529.23.125.1.1.44	DisplayString	read-write	Allows the user to enter any additional AT commands in the modem answer string.
INT systemProfile_System8kClock	1.3.6.1.4.1.529.23.125.1.1.48	INTEGER	read-write	8KHz clock source for Stinger-10.
INT systemProfile_SystemRmtMgmt	1.3.6.1.4.1.529.23.125.1.1.8	INTEGER	read-write	Set true if this system allows remote management.
INT systemProfile_T302Timer	1.3.6.1.4.1.529.23.125.1.1.30	INTEGER	read-write	Number of milliseconds to wait for additional called number information elements for an incoming T-Online call. Defaults to 1500.
INT systemProfile_TermRate	1.3.6.1.4.1.529.23.125.1.1.5	INTEGER	read-write	The bit rate of the management terminal port, as given above.
INT systemProfile_TOnline	1.3.6.1.4.1.529.23.125.1.1.28	INTEGER	read-write	TRUE if we should route calls to T-Online, FALSE if not.
INT systemProfile_TOnlineMostAvailChan	1.3.6.1.4.1.529.23.125.1.1.29	INTEGER	read-write	TRUE if T-Online calls are to be routed to NT line with the most available B-channels FALSE if it is based on circular basis.
STR systemProfile_UserstatFormat	1.3.6.1.4.1.529.23.125.1.1.41	DisplayString	read-write	Defines the output format of the session listing command 'userstat' and the remote user information protocol 'finger'. The following special characters will be converted to their values for each listed session. The width of each field is indicated in []. %i [10] SessionID, Unique ID assigned to the session. %l [10] Line/Chan, Physical address (shelf.slot.line/chan). %s [11] Slot:Item, shelf:slot:item/logical-item of the host port. %r [11] Tx/Rx Rate, Transmit and receive rates. %d [ 3] Svc, A three-letter code showing the type of service. %a [15] Address, IP address. %u [14] Username, Connection profile name. %c [10] ConnTime, Ammount of time connected in hours:minutes:seconds. %t [10] IdleTime, Ammount of time idle in hours:minutes:seconds. %n [24] Dialed#, Number dialed if known. %f [24] Calling#, Number calling from if known. For example set userstat-format = '%i %l %s %r %d %a %u %c %t %n' would set the format to the factory default value.
INT systemProfile_UseTrunkGroups	1.3.6.1.4.1.529.23.125.1.1.14	INTEGER	read-write	Enables TrunkGroups for all network lines.
INT systemProfile_V110Subaddress	1.3.6.1.4.1.529.23.125.1.1.13	INTEGER	read-write	sub-address assigned to V.110 rate adaption connections
INT systemProfile_WanInterface	1.3.6.1.4.1.529.23.125.1.1.39	INTEGER	read-write	Sets the type of WAN interface supported: T1-CSU or Serial WAN.

RFC description

Defines system-level configuration profiles including contact, location, and management settings for Ascend devices.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBSYS1-MIB

What Is ASCEND-MIBSYS1-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description