CISCO-URWB-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-URWB-MIB

Organization: Cisco Systems

Last Updated: 2022-05-10

Description: MIB for Cisco Ultra Reliable Wireless Backhaul (URWB) devices, monitoring operational mode, firmware, wireless channel configuration, and mobility on industrial wireless backhaul nodes

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-URWB-MIB?

CISCO-URWB-MIB manages Cisco's Ultra-Reliable Wireless Backhaul (URWB) product line, industrial wireless mesh/backhaul radios used to link fixed and mobile assets (trains, vehicles, cranes) without wired connections. It exposes data about device identity and configuration, such as model, firmware version, operating mode, and the wireless channel/frequency settings for its two radio slots. Critically for monitoring, it surfaces software/hardware health indicators including device uptime and firmware version, alongside operational-mode state, letting an operator confirm a backhaul node is running the expected code and has not rebooted unexpectedly. It defines its own trap group (ciscoUrwbTraps) for fault notification and an experimental branch, and as a Cisco enterprise MIB it builds on standard SNMPv2 conventions rather than a specific IETF wireless MIB. It is deployed in industrial and transportation settings such as rail, ports, and mining where wireless mesh backhaul links must be continuously monitored for reliability, typically starting with a CISCO-URWB-MIB download to load the module into the operator's MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-URWB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Cisco Ultra-Reliable Wireless Backhaul (URWB) radios
  • industrial wireless mesh nodes

Monitoring Examples

An operator would poll ciscoUrwbUptime and ciscoUrwbFwVersion on a URWB node to confirm it has been stable and running current firmware, then check ciscoUrwbFreq1/ciscoUrwbChanWidth1 and ciscoUrwbFreq2/ciscoUrwbChanWidth2 against expected channel plans to detect misconfiguration on either radio interface. A sudden drop in ciscoUrwbUptime combined with an unexpected ciscoUrwbOperMode value would indicate the node restarted or fell out of its intended backhaul role. ciscoUrwbName and ciscoUrwbMid identify which physical node in the mesh is reporting.

What Can Be Monitored

  • device uptime
  • firmware version
  • operating mode
  • wireless channel/frequency configuration
  • node identity/model

This MIB depends on

Related MIBs

Imported Objects

From CISCO-SMI

ciscoMgmtOBJECT-IDENTITY

From IF-MIB

ifNumberOBJECT-TYPE
ifTableOBJECT-TYPE

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using ciscoUrwbHandoffSeq OID:

Select a Cisco wireless backhaul radio as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ciscoUrwbHandoffSeq into the Find box to locate it in the OID tree, then select it and click OK. It reports the handoff sequence number. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Manages Cisco Ultra Reliable Wireless backhaul (URWB) device operations and status.

Start monitoring Cisco wireless backhaul radios with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-URWB-MIB