All MIBs › CISCO-SNAPSHOT-MIB › ciscoSnapshotRetryInterval
ciscoSnapshotRetryInterval
Module: CISCO-SNAPSHOT-MIB
OID (symbolic): CISCO-SNAPSHOT-MIB::ciscoSnapshotRetryInterval
OID (numeric): 1.3.6.1.4.1.9.9.19.1.2.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The amount of time to wait and retry a route exchange if an active period elapses with no routes being exchanged. For example, if an interface is down (or a DDR phone number is busy, or a DDR interface is unavailable) during the active interval, instead of waiting for the amount of time specified by ciscoSnapshotQuietTime to elapse before an attempt is made to exchange routing updates again, the attempt is made after the amount of time specified by this object has elapsed. This value is calculated automatically based on the ciscoSnapshotActiveInterval.
An instance of this object may only be present if the value of the associated ciscoSnapshotClient object is true.
What is ciscoSnapshotRetryInterval?
Sets how long to wait before retrying a route exchange if an active period passed with no routes exchanged, e.g. because the interface or dial connection was unavailable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.19.1.2.1.6 snmpwalk -v2c -c public <target> CISCO-SNAPSHOT-MIB::ciscoSnapshotRetryInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.19.1.2.1.6.1 snmpget -v2c -c public <target> CISCO-SNAPSHOT-MIB::ciscoSnapshotRetryInterval.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ciscoSnapshotRetryInterval.1
Start monitoring Cisco IOS routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-SNAPSHOT-MIB::ciscoSnapshotRetryInterval OID value, configure state conditions and alerts, and monitor any Cisco IOS routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.19 | ciscoSnapshotMIB | CISCO-SNAPSHOT-MIB |
| 1.3.6.1.4.1.9.9.19.1 | ciscoSnapshotMIBObjects | CISCO-SNAPSHOT-MIB |
| 1.3.6.1.4.1.9.9.19.1.2 | ciscoSnapshotInterfaceTable | CISCO-SNAPSHOT-MIB |
| 1.3.6.1.4.1.9.9.19.1.2.1 | ciscoSnapshotInterfaceEntry | CISCO-SNAPSHOT-MIB |
| 1.3.6.1.4.1.9.9.19.1.2.1.6 | ciscoSnapshotRetryInterval | CISCO-SNAPSHOT-MIB |