CISCO-RTTMON-ICMP-MIB :: rttMonIcmpJitterStatsRTTMin

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-RTTMON-ICMP-MIBrttMonIcmpJitterStatsRTTMin

rttMonIcmpJitterStatsRTTMin

Module: CISCO-RTTMON-ICMP-MIB

OID (symbolic): CISCO-RTTMON-ICMP-MIB::rttMonIcmpJitterStatsRTTMin

OID (numeric): 1.3.6.1.4.1.9.9.42.1.3.8.1.8

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: The minimum of RTT's that were successfully measured.

What is rttMonIcmpJitterStatsRTTMin?

Reports the smallest (best) round-trip time observed among all successfully measured samples in the ICMP jitter test.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.42.1.3.8.1.8
snmpwalk -v2c -c public <target> CISCO-RTTMON-ICMP-MIB::rttMonIcmpJitterStatsRTTMin

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.42.1.3.8.1.8.1
snmpget -v2c -c public <target> CISCO-RTTMON-ICMP-MIB::rttMonIcmpJitterStatsRTTMin.1

Start monitoring Cisco routers (IP SLA ICMP Jitter probes) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-RTTMON-ICMP-MIB::rttMonIcmpJitterStatsRTTMin OID value, configure state conditions and alerts, and monitor any Cisco routers (IP SLA ICMP Jitter probes) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.42ciscoRttMonMIBCISCO-RTTMON-MIB
1.3.6.1.4.1.9.9.42.1ciscoRttMonObjectsCISCO-RTTMON-MIB
1.3.6.1.4.1.9.9.42.1.3rttMonStatsCISCO-RTTMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.42.1.3.8rttMonIcmpJitterStatsTableCISCO-RTTMON-ICMP-MIB
1.3.6.1.4.1.9.9.42.1.3.8.1rttMonIcmpJitterStatsEntryCISCO-RTTMON-ICMP-MIB
1.3.6.1.4.1.9.9.42.1.3.8.1.8rttMonIcmpJitterStatsRTTMinCISCO-RTTMON-ICMP-MIB