All MIBs › A3COM-HUAWEI-ENTITY-EXT-MIB
Organization: Hangzhou H3C Technologies Co., Ltd.
Last Updated: 2011-11-26
Category: Hardware and Environment, Vendor: H3C/HH3C
Description: Extends the standard ENTITY-MIB with H3C-specific hardware component attributes and operational states.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is A3COM-HUAWEI-ENTITY-EXT-MIB?
A3COM-HUAWEI-ENTITY-EXT-MIB is an H3C enterprise MIB that extends the standard IETF ENTITY-MIB with vendor-specific attributes for physical device components, such as boards, modules, and chassis elements. Although no sample objects were provided, its stated purpose is to carry additional general hardware attributes and operational state information beyond what the base ENTITY-MIB models. Its likely monitoring role is hardware inventory and status: exposing details like extended physical entity states, serial/hardware identifiers, or component health that standard entPhysicalTable fields don't cover, supporting hardware fault and inventory monitoring. It has an explicit and direct dependency on the standard ENTITY-MIB, since it is defined purely as an extension supplementing entPhysicalTable-style data. It is deployed alongside ENTITY-MIB support on H3C routers, switches, and modular chassis systems for detailed hardware inventory polling. Engineers can download the A3COM-HUAWEI-ENTITY-EXT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-ENTITY-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C routers, switches, and modular chassis systems
Monitoring Examples
No sample objects were supplied for this module, so specific object names cannot be cited with confidence; typical usage would involve cross-referencing an extended physical-entity table keyed by an index parallel to entPhysicalIndex to pull additional H3C-specific hardware attributes not present in the standard ENTITY-MIB. An NMS would join this extension data with entPhysicalDescr and entPhysicalClass from ENTITY-MIB to build a fuller hardware health/inventory picture. Without concrete object names, a precise polling scenario cannot be described honestly.
This MIB depends on
Related MIBs
Imported Objects
From A3COM-HUAWEI-OID-MIB
| h3cCommon | OBJECT-IDENTITY |
From ENTITY-MIB
| entPhysicalDescr | OBJECT-TYPE |
| entPhysicalIndex | OBJECT-TYPE |
| entPhysicalName | OBJECT-TYPE |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| H3C h3cEntityExtAdminStatus | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.2 | H3cAdminState | read-write | The administrative state for this object. |
| H3C h3cEntityExtAlarmLight | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.5 | H3cAlarmStatus | read-only | The alarm status for this entity. It does not include the severity of alarms raised on child components. In this condition, there will be a alarm light on the entity, the object should have the same status with it. |
| I32 h3cEntityExtAveragePower | 1.3.6.1.4.1.43.45.1.10.2.6.1.3.1.1.4 | Integer32 | read-write | The average power consumed by the entity expressed in milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned. |
| h3cEntityExtCompliance | 1.3.6.1.4.1.43.45.1.10.2.6.3.1.1 | The compliance statement for systems supporting this MIB. | ||
| h3cEntityExtCompliances | 1.3.6.1.4.1.43.45.1.10.2.6.3.1 | |||
| h3cEntityExtConformance | 1.3.6.1.4.1.43.45.1.10.2.6.3 | |||
| I32 h3cEntityExtCpuAvgUsage | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.26 | Integer32 | read-only | The average CPU usage for the entity in a period of time. |
| I32 h3cEntityExtCpuMaxUsage | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.20 | Integer32 | read-only | The maximal CPU usage for the entity in the period of time. |
| I32 h3cEntityExtCpuUsage | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.6 | Integer32 | read-only | The CPU usage for this entity. Generally, the CPU usage will calculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity. |
| I32 h3cEntityExtCpuUsageRecoverThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.31 | Integer32 | read-write | The recover threshold for the CPU usage. When the CPU usage falls down to the threshold, a notification is sent. The h3cEntityExtCpuUsageRecoverThreshold must be less than or equal to the h3cEntityExtCpuUsageThreshold. |
| I32 h3cEntityExtCpuUsageThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.7 | Integer32 | read-write | The threshold for the CPU usage. When the CPU usage exceeds the threshold, a notification will be sent. |
| NTF h3cEntityExtCpuUsageThresholdNotfication | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.4 | The h3cEntityExtCpuUsageThresholdNotfication indicates the entity is overloaded. | ||
| NTF h3cEntityExtCpuUsageThresholdRecover | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.25 | The trap indicates the CPU usage descends the threshold. | ||
| I32 h3cEntityExtCriticalLowerTemperatureThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.29 | Integer32 | read-write | The threshold for the critical Temperature. When temperature exceeds the critical lower temperature, a notification will be sent. |
| I32 h3cEntityExtCriticalTemperatureThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.17 | Integer32 | read-write | The threshold for the critical Temperature. When temperature exceeds the critical temperature, a notification will be sent. |
| NTF h3cEntityExtCriticalTemperatureThresholdNotification | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.8 | The h3cEntityExtCriticalTemperatureThresholdNotification indicates the temperature exceeds the critical temperature. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failure of air-condition. | ||
| NTF h3cEntityExtCritLowerTempThresholdNotification | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.29 | The h3cEntityExtCritLowerTempThresholdNotification indicates the temperature is lower than the threshold. If the temperature is lower too much than the entity needs, the entity will halt. | ||
| G32 h3cEntityExtCurrentPower | 1.3.6.1.4.1.43.45.1.10.2.6.1.3.1.1.3 | Gauge32 | read-only | The measured usage power of the entity expressed in milliWatts. |
| NTF h3cEntityExtECCParityAlarm | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.28 | The trap indicates the ECC(Error Correction Code) parity error alarm. | ||
| INT h3cEntityExtECCParityAlarmStatus | 1.3.6.1.4.1.43.45.1.10.2.6.2.1.2 | INTEGER | accessible-for-notify | ECC parity error. |
| h3cEntityExtend | 1.3.6.1.4.1.43.45.1.10.2.6 | The private MIB file includes the general extent information of the device. | ||
| NTF h3cEntityExternalAlarmOccur | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.23 | The trap is generated when the monitored device connected to the specified entity fails. | ||
| NTF h3cEntityExternalAlarmRecover | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.24 | The trap is generated when the failed device connected to the specified entity returns to normal. | ||
| INT h3cEntityExtErrorStatus | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.19 | INTEGER | read-only | Indicate the error state of this entity object. Now it only supports Port, general power supply, RPS power supply and board/Subcard. It may have one of these values. The following four values can be used for all kinds of entities. notSupported(1) means this entity can not support this function. normal(2) means the statement of this entity is normal. for ports, it doesn't differentiate 10M/s, 100M/s, 1000M/s, duplex and half-duplex. For fan, power supply and board-Subcard, it means their states are normal. postFailure(3) means the entity fails to POST. entityAbsent(4) means the entity is absent now. The following values is depended on the entity . For Port entities, it may have the following values. If its POST is failure, then the value of the instance will be postFailure(3), otherwise the value will be normal(2). If enable power supply over Ethernet on this port is failure, the value of this instance will be poeError(11), otherwise it will be normal(2). For stack port, if it connects to another stack port normally, and these two units merge into one stack, then the value of this instance will be normal(2). If something wrong occurs and the unit can not merge into stack, the value of this instance will be stackPortFailed(23). If the stack port forms resilient daisy chain with another stack port on the other unit, the value of this instance will be stackPortBlocked(22). For SFP ports, if it fail to receive, the value of this instance will be sfpRecvError(31), if it fail to send, the value is sfpSendError(32), if it fail to send and receive, the value is sfpBothError(33), otherwise it will be normal(2). fanError(41) means that the fan stops working. psuError(51) means that the Power Supply Unit is in the state of fault. rpsError(61) means the RPS is in the state of fault. moduleFaulty(71) means the Module is in the state of fault. sensorError(81) means the sensor is in the state of fault. hardwareFaulty(91) means the hardware of specified entity is in the state of fault. NMS must be compatible with the states which may be added in the future. |
| NTF h3cEntityExtFanDirectionNotAccord | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.32 | This trap indicates the direction of fans does not accord with each other. The two parameters indicate the parent entity of the fans. | ||
| NTF h3cEntityExtFanDirectionNotPreferred | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.31 | This trap indicates the specified fan's direction does not accord with preferred. The two parameters indicate the entity index and physical name of fan. | ||
| NTF h3cEntityExtFaultAlarmOff | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.17 | The trap indicates a fault disappears on the specified entity. | ||
| NTF h3cEntityExtFaultAlarmOn | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.16 | The trap indicates a fault occures on the specified entity. | ||
| TIK h3cEntityExtFirstTrapTime | 1.3.6.1.4.1.43.45.1.10.2.6.2.1.4 | TimeTicks | accessible-for-notify | Represents the first trap time. |
| DAT h3cEntityExtFirstUsedDate | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.25 | DateAndTime | read-only | The first used date of the entity. |
| NTF h3cEntityExtForcedPowerOff | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.14 | The trap indicates the entity is forced to power off. | ||
| NTF h3cEntityExtForcedPowerOn | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.15 | The trap indicates the entity is forced to power on. | ||
| h3cEntityExtGroup | 1.3.6.1.4.1.43.45.1.10.2.6.3.2.1 | Entity Extend group. | ||
| h3cEntityExtGroups | 1.3.6.1.4.1.43.45.1.10.2.6.3.2 | |||
| I32 h3cEntityExtLowerTemperatureThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.21 | Integer32 | read-write | The threshold for the lower Temperature. When temperature runs under the threshold, a notification will be sent. |
| MAC h3cEntityExtMacAddress | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.18 | MacAddress | read-only | MAC Address of the entity. |
| U32 h3cEntityExtMacAddressCount | 1.3.6.1.4.1.43.45.1.10.2.6.1.2.1.1.5 | Unsigned32 | read-only | MAC address count. The count of MAC addresses of the entity, such as chassis, module, or port, and so on. |
| h3cEntityExtManu | 1.3.6.1.4.1.43.45.1.10.2.6.1.2 | |||
| STR h3cEntityExtManuBOM | 1.3.6.1.4.1.43.45.1.10.2.6.1.2.1.1.4 | SnmpAdminString | read-only | Device BOM code. The device BOM code of the entity such as chassis, module, and so on. It is the component code of ERP system, which can be disassembled from device-number. |
| STR h3cEntityExtManuBuildInfo | 1.3.6.1.4.1.43.45.1.10.2.6.1.2.1.1.3 | SnmpAdminString | read-only | Device version information. The device version information of the entity such as chassis, module, and so on. It consists of software version information and hardware version information. |
| h3cEntityExtManuEntry | 1.3.6.1.4.1.43.45.1.10.2.6.1.2.1.1 | not-accessible | The device manufacture information about a particular physical entity. | |
| h3cEntityExtManuGroup | 1.3.6.1.4.1.43.45.1.10.2.6.3.2.3 | Standard Device Manufacture Information group. | ||
| I32 h3cEntityExtManuPhysicalIndex | 1.3.6.1.4.1.43.45.1.10.2.6.1.2.1.1.1 | Integer32 | accessible-for-notify | The index of h3cEntityExtManuTable. This index is identical to entPhysicalIndex in ENTITY-MIB. |
| STR h3cEntityExtManuSerialNum | 1.3.6.1.4.1.43.45.1.10.2.6.1.2.1.1.2 | SnmpAdminString | read-only | Manufacture serial number. The manufacture serial number of the entity such as chassis, module, and so on. It is got from the device when manufacturing. For low level box-device, the manufacture serial number is the device-number of System Control Board(SCB for short), it is written into the SCB directly; for middle level or high level frame-device, the manufacture serial number is the device-numbers of SCB and Service Board, because the SCB, Service Board and chassis are separate to sale and the device-number of chassis can not be written into board. |
| h3cEntityExtManuTable | 1.3.6.1.4.1.43.45.1.10.2.6.1.2.1 | not-accessible | The table about device manufacture information. | |
| NTF h3cEntityExtMemAllocatedFailed | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.27 | The trap indicates the memory allocated failed. | ||
| I32 h3cEntityExtMemAvgUsage | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.27 | Integer32 | read-only | The average memory usage for the entity in a period of time. |
| U32 h3cEntityExtMemSize | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.10 | Unsigned32 | read-only | The size of memory for the entity. |
| OCT h3cEntityExtMemType | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.28 | OCTET STRING | read-only | The memory type of entity. |
| I32 h3cEntityExtMemUsage | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.8 | Integer32 | read-only | The memory usage for the entity. This object indicates what percent of memory are used. |
| I32 h3cEntityExtMemUsageThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.9 | Integer32 | read-write | The threshold for the Memory usage, When the memory usage exceeds the threshold, a notification will be sent. |
| NTF h3cEntityExtMemUsageThresholdNotification | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.5 | The h3cEntityExtMemUsageThresholdNotification indicates the entity is overloaded. | ||
| NTF h3cEntityExtMemUsageThresholdRecover | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.26 | The trap indicates the memory usage descends the threshold. | ||
| G32 h3cEntityExtNominalPower | 1.3.6.1.4.1.43.45.1.10.2.6.1.3.1.1.2 | Gauge32 | read-only | The nominal power of the entity expressed in milliWatts. |
| h3cEntityExtNotificationGroup | 1.3.6.1.4.1.43.45.1.10.2.6.3.2.2 | Entity Extend Notification group. | ||
| h3cEntityExtObjects | 1.3.6.1.4.1.43.45.1.10.2.6.1 | |||
| NTF h3cEntityExtOperDisabled | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.7 | The trap indicates the entity is not operable at present. | ||
| NTF h3cEntityExtOperEnabled | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.6 | The trap indicates the entity is operable at present. | ||
| H3C h3cEntityExtOperStatus | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.3 | H3cOperState | read-only | The operate state for this object. |
| I32 h3cEntityExtPeakPower | 1.3.6.1.4.1.43.45.1.10.2.6.1.3.1.1.5 | Integer32 | read-write | The peak power consumed by the entity expressed in milliWatts. Writing a value of zero to this object resets its value to zero. Writing any other value to this object has no effect on its value and an error is returned. |
| I32 h3cEntityExtPhyCpuFrequency | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.24 | Integer32 | read-only | The CPU frequency of entity. Unit of measure is MHZ. |
| U32 h3cEntityExtPhyMemSize | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.23 | Unsigned32 | read-only | The memory size of entity. This is the physical attribute of entity. |
| I32 h3cEntityExtPhysicalIndex | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.1 | Integer32 | accessible-for-notify | The index of h3cEntityExtStateTable. This index is identical to entPhysicalIndex in ENTITY-MIB |
| h3cEntityExtPower | 1.3.6.1.4.1.43.45.1.10.2.6.1.3 | |||
| h3cEntityExtPowerEntry | 1.3.6.1.4.1.43.45.1.10.2.6.1.3.1.1 | not-accessible | The entity power information about a particular physical entity. | |
| h3cEntityExtPowerGroup | 1.3.6.1.4.1.43.45.1.10.2.6.3.2.4 | Standard Entity Power Information group. | ||
| I32 h3cEntityExtPowerPhysicalIndex | 1.3.6.1.4.1.43.45.1.10.2.6.1.3.1.1.1 | Integer32 | accessible-for-notify | The index of h3cEntityExtPowerTable. This index is identical to entPhysicalIndex in ENTITY-MIB. |
| h3cEntityExtPowerTable | 1.3.6.1.4.1.43.45.1.10.2.6.1.3.1 | not-accessible | This table describes the power information of all the physical entity on the device, such as the fans, the subcards, the boards, etc. | |
| NTF h3cEntityExtResourceEnough | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.19 | The trap indicates that the entity recovers from the status of no enough resource. | ||
| NTF h3cEntityExtResourceLack | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.18 | The trap indicates that a kind of resource is not enough on the specified entity. | ||
| NTF h3cEntityExtSFPAlarmOff | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.10 | The trap is generated when the SFP module restores to normal status. | ||
| NTF h3cEntityExtSFPAlarmOn | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.9 | The trap is generated when the SFP module fails or runs abnormally for some particular reason. | ||
| NTF h3cEntityExtSFPInvalid | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.33 | The transceiver module is not compatible with the interface card. The authorized manufacturer therefore shall NOT guarantee the normal function of the transceiver. The transceiver module will be invalidated in days. Please replace it with a compatible one as soon as possible. The trap is generated periodically after a phony transceiver module has been found. | ||
| I32 h3cEntityExtSFPInvalidInDays | 1.3.6.1.4.1.43.45.1.10.2.6.2.1.3 | Integer32 | accessible-for-notify | The days when the transceiver module is still valid, but after those days, it will be invaldated. |
| NTF h3cEntityExtSFPInvalidNow | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.34 | This transceiver module is not compatible with the interface card. The authorized manufacturer therefore shall NOT guarantee the normal function of the transceiver. The trap is generated after a phony transceiver module has been found. | ||
| NTF h3cEntityExtSFPPhony | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.11 | This module is NOT sold by authorized manufacturer. The normal function of the device or assume the maintenance responsibility thereof will NOT be guaranteed. The trap is generated periodically after a phony module has been found. | ||
| I32 h3cEntityExtShutdownLowerTemperatureThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.30 | Integer32 | read-write | The threshold for the shutdown Temperature. When temperature exceeds the lower threshold, a notification will be sent and the entity will be shutdown. |
| I32 h3cEntityExtShutdownTemperatureThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.22 | Integer32 | read-write | The threshold for the shutdown Temperature. When temperature exceeds the threshold, a notification will be sent and the entity will be shutdown. |
| H3C h3cEntityExtStandbyStatus | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.4 | H3cStandbyStatus | read-only | This object is used for monitoring standby status. Not all entities support this object. |
| h3cEntityExtState | 1.3.6.1.4.1.43.45.1.10.2.6.1.1 | |||
| h3cEntityExtStateEntry | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1 | not-accessible | The information about a particular physical entity. | |
| h3cEntityExtStateTable | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1 | not-accessible | This table contains one row per physical entity, There is always at least one row for an 'overall' physical entity. The information in each row may be not include all the object in this table, because of the entity need not some of the information here. | |
| I32 h3cEntityExtTemperature | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.12 | Integer32 | read-only | The temperature for the entity. |
| NTF h3cEntityExtTemperatureLower | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.20 | The trap indicates the temperature of a specified entity is under the lower threshold. In this condition, user should check the status and the environment of the entity, sometimes it goes wrong for some reason. | ||
| NTF h3cEntityExtTemperatureNormal | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.22 | The trap indicates the temperature of a specified entity recover from abnormal status. | ||
| I32 h3cEntityExtTemperatureThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.13 | Integer32 | read-write | The threshold for the temperature. When the temperature exceeds the threshold, a notification will be sent. |
| NTF h3cEntityExtTemperatureThresholdNotification | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.1 | The h3cEntityExtTemperatureThresholdNotification indicates the temperature exceeded the threshold. In this condition, user should check the status and the environment of the entity, sometimes it happens because of the failure of air-condition. | ||
| NTF h3cEntityExtTemperatureTooLow | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.30 | The h3cEntityExtTemperatureTooLow indicates the temperature is lower than the threshold. If the temperature is lower too much than the entity needs, the entity halts now. | ||
| NTF h3cEntityExtTemperatureTooUp | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.21 | The trap indicates the temperature of a specified entity exceeded the shutdown threshold. In this condition, user should check the status and the environment of the entity, sometimes it goes wrong for some reason. | ||
| STR h3cEntityExtTrapDescription | 1.3.6.1.4.1.43.45.1.10.2.6.2.1.1 | SnmpAdminString | accessible-for-notify | The information of trap. |
| h3cEntityExtTraps | 1.3.6.1.4.1.43.45.1.10.2.6.2 | |||
| h3cEntityExtTrapsInfor | 1.3.6.1.4.1.43.45.1.10.2.6.2.1 | |||
| h3cEntityExtTrapsPrefix | 1.3.6.1.4.1.43.45.1.10.2.6.2.0 | |||
| I32 h3cEntityExtUpTime | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.11 | Integer32 | read-only | The uptime for the entity. The meaning of uptime is when the entity is up, and the value of the object will add 1 seconds while the entity is running. |
| I32 h3cEntityExtVoltage | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.14 | Integer32 | read-only | The voltage for the entity. |
| I32 h3cEntityExtVoltageHighThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.16 | Integer32 | read-write | The high-threshold for the voltage. When voltage greater than high-threshold, a notification will be sent. |
| NTF h3cEntityExtVoltageHighThresholdNotification | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.3 | The h3cEntityExtVoltageHighThresholdNotification indicates the voltage is higher than the threshold. If the voltage is higher too much than the entity needs, The entity may be damaged by the high voltage. | ||
| I32 h3cEntityExtVoltageLowThreshold | 1.3.6.1.4.1.43.45.1.10.2.6.1.1.1.1.15 | Integer32 | read-write | The low-threshold for the voltage. When voltage is lower than low-threshold, a notification will be sent. |
| NTF h3cEntityExtVoltageLowThresholdNotification | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.2 | The h3cEntityExtVoltageLowThresholdNotification indicates the voltage is lower than the threshold. If the voltage is lower too much than the entity needs, the entity will halt. | ||
| NTF h3cEntityInsert | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.12 | The trap is generated when a removeable entity inserting to device. | ||
| NTF h3cEntityRemove | 1.3.6.1.4.1.43.45.1.10.2.6.2.0.13 | The trap is generated when a removeable entity removing from device. | ||
| h3cProcessEntry | 1.3.6.1.4.1.43.45.1.10.2.6.1.4.1.1 | not-accessible | The information about a particular process, namely a task. | |
| U32 h3cProcessID | 1.3.6.1.4.1.43.45.1.10.2.6.1.4.1.1.1 | Unsigned32 | read-only | This object indicates the identifier of process, namely task ID in system. |
| STR h3cProcessName | 1.3.6.1.4.1.43.45.1.10.2.6.1.4.1.1.2 | DisplayString | read-only | This object indicates the process name. |
| h3cProcessObjects | 1.3.6.1.4.1.43.45.1.10.2.6.1.4 | |||
| h3cProcessTable | 1.3.6.1.4.1.43.45.1.10.2.6.1.4.1 | not-accessible | The Table describes the information about a particular process, namely a task. | |
| U32 h3cProcessUtil5Min | 1.3.6.1.4.1.43.45.1.10.2.6.1.4.1.1.3 | Unsigned32 | read-only | This object provides a general idea of how busy a process caused the processor to be over a 5 minute period. The ratio is calculated by the overall CPU usage caused by the process. |
RFC description
3Com Huawei vendor-private extension MIB; extends entity management for physical inventory and component status.
Start monitoring H3C routers, switches, and chassis systems with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.