All MIBs › CISCO-POWER-ETHERNET-EXT-MIB › cpeExtPsePortPwrManAlloc
cpeExtPsePortPwrManAlloc
Module: CISCO-POWER-ETHERNET-EXT-MIB
OID (symbolic): CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortPwrManAlloc
OID (numeric): 1.3.6.1.4.1.9.9.402.1.2.1.15
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the manual power allocation that the PSE will allocate to the PD connected to this interface regardless of the amount requested via CDP or IEEE.
Setting this object value to zero disables the manual power allocation.
Warning: Misconfiguring this manual power allocation may cause damage to the system and void the warranty. Take precautions not to oversubscribe the power supply.
What is cpeExtPsePortPwrManAlloc?
Sets a manual power allocation (in milliwatts) that the PSE will grant to the powered device on this port regardless of what was requested via CDP or IEEE negotiation; setting it to zero disables manual allocation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.402.1.2.1.15 snmpwalk -v2c -c public <target> CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortPwrManAlloc
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.402.1.2.1.15.1 snmpget -v2c -c public <target> CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortPwrManAlloc.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.402.1.2.1.15.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cpeExtPsePortPwrManAlloc.1
Start monitoring Cisco Catalyst switches with PoE-capable Ethernet ports with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortPwrManAlloc OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches with PoE-capable Ethernet ports from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.402 | ciscoPowerEthernetExtMIB | CISCO-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.9.9.402.1 | cpeExtMIBObjects | CISCO-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.9.9.402.1.2 | cpeExtPsePortTable | CISCO-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.9.9.402.1.2.1 | cpeExtPsePortEntry | CISCO-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.9.9.402.1.2.1.15 | cpeExtPsePortPwrManAlloc | CISCO-POWER-ETHERNET-EXT-MIB |