CISCO-POWER-ETHERNET-EXT-MIB :: cpeExtPsePortAdditionalStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-POWER-ETHERNET-EXT-MIB › cpeExtPsePortAdditionalStatus

cpeExtPsePortAdditionalStatus

Module: CISCO-POWER-ETHERNET-EXT-MIB

OID (symbolic): CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortAdditionalStatus

OID (numeric): 1.3.6.1.4.1.9.9.402.1.2.1.5

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description: This object is an extension of the pethPsePortDetectionStatus object from RFC3621 and provides additional status information.

deny: When set, the PD attached to the interface is being denied power due to insufficient power resources on the Power Sourcing Equipment.

overdraw: When set, the PD attached to the interface is being denied power because the PD is trying to consume more power than it has been configured to consume.

overdrawLog: When set, the PD attached to the interface is trying to consume more power than it has been configured to consume, but is not being denied power.

What is cpeExtPsePortAdditionalStatus?

Reports detailed PoE status conditions for the port beyond the basic detection status, such as power being denied due to insufficient power budget, giving more granular troubleshooting information.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.402.1.2.1.5
snmpwalk -v2c -c public <target> CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortAdditionalStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.402.1.2.1.5.1
snmpget -v2c -c public <target> CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortAdditionalStatus.1

Start monitoring Cisco Catalyst switches with PoE-capable Ethernet ports with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortAdditionalStatus OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches with PoE-capable Ethernet ports from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.402ciscoPowerEthernetExtMIBCISCO-POWER-ETHERNET-EXT-MIB
1.3.6.1.4.1.9.9.402.1cpeExtMIBObjectsCISCO-POWER-ETHERNET-EXT-MIB
1.3.6.1.4.1.9.9.402.1.2cpeExtPsePortTableCISCO-POWER-ETHERNET-EXT-MIB
1.3.6.1.4.1.9.9.402.1.2.1cpeExtPsePortEntryCISCO-POWER-ETHERNET-EXT-MIB
1.3.6.1.4.1.9.9.402.1.2.1.5cpeExtPsePortAdditionalStatusCISCO-POWER-ETHERNET-EXT-MIB