All MIBs › CISCO-POWER-ETHERNET-EXT-MIB › cpeExtPsePortEnable
cpeExtPsePortEnable
Module: CISCO-POWER-ETHERNET-EXT-MIB
OID (symbolic): CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortEnable
OID (numeric): 1.3.6.1.4.1.9.9.402.1.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is an extension of the pethPsePortAdminEnable object from RFC3621. It allows the user to be more specific when enabling the PSE functions. The states, 'auto', 'static' and 'limit' correspond to a value of 'true' for the pethPsePortAdminEnable object. The state 'disable' corresponds to a value of 'false' for the pethPsePortAdminEnable object.
Setting this value to 'auto' enables Powered Device discovery on the interface and the amount of power allocated depends on the Powered Device discovered. If pethPsePortAdminEnable was 'false' prior to this set operation, then it will become 'true'.
Setting this value to 'static' will also enable Powered Device discovery. However, this is different from 'auto' in that the amount of power is pre-allocated based on the configuration on the Power Sourcing Equipment. If pethPsePortAdminEnable was 'false' prior to this set operation, then it will become 'true'.
Setting this value to 'limit' enables Powered Device discovery on the interface. The amount of power allocated depends on the Powered Device discovered and the value of cpeExtPsePortPwrMax. The lower value will be used. If pethPsePortAdminEnable was 'false' prior to this set operation, then it will become 'true'.
Setting this value to 'disable' disables the PSE functions. The pethPsePortAdminEnable object will adopt the value of 'false' if it was 'true' prior to this set operation. When setting the pethPsePortAdminEnable object to 'false' this object cpeExtPsePortEnable will adopt the value of 'disable'.
If cpeExtPsePortPolicingCapable of the PSE port, or cpeExtMainPsePwrMonitorCapable of the PSE port's main group, has the value of 'false', this object can only be set to 'auto', 'static' or 'disable'. Otherwise, this object can be set to 'auto', 'static', 'limit' or 'disable'.
What is cpeExtPsePortEnable?
Configures the inline power (PoE) mode for a port—such as auto, static, or limit—giving finer control over power delivery than the basic on/off admin-enable setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.402.1.2.1.1 snmpwalk -v2c -c public <target> CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.402.1.2.1.1.1 snmpget -v2c -c public <target> CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.402.1.2.1.1.1 i <value>
Start monitoring Cisco Catalyst switches with PoE-capable Ethernet ports with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-POWER-ETHERNET-EXT-MIB::cpeExtPsePortEnable OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switches with PoE-capable Ethernet ports from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.402 | ciscoPowerEthernetExtMIB | CISCO-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.9.9.402.1 | cpeExtMIBObjects | CISCO-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.9.9.402.1.2 | cpeExtPsePortTable | CISCO-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.9.9.402.1.2.1 | cpeExtPsePortEntry | CISCO-POWER-ETHERNET-EXT-MIB |
| 1.3.6.1.4.1.9.9.402.1.2.1.1 | cpeExtPsePortEnable | CISCO-POWER-ETHERNET-EXT-MIB |