CIENA-WS-XCVR-PLUGGABLE-MIB

All MIBs › CIENA-WS-XCVR-PLUGGABLE-MIB

Organization: Ciena Corporation

Last Updated: 2017-07-24

Category: Network Interfaces, Optical and WDM, Vendor: Ciena

Description: Manages pluggable transceiver inventory and parameters on Ciena WaveServer optical platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIENA-WS-XCVR-PLUGGABLE-MIB?

CIENA-WS-XCVR-PLUGGABLE-MIB is a Ciena private MIB, auto-generated from a YANG module, that augments the base CIENA-WS-XCVR-MIB with pluggable-optics-specific inventory and diagnostic data for Ciena Waveserver optical transport platforms. It adds columns to existing transceiver tables via AUGMENTS clauses — cwsXcvrPluggableVendorIdRevisionCompliance on the vendor ID entry (per SFF-8636), cwsXcvrPluggableDeviceIdIdentifier/IdentifierRaw/ExtendedIdentifierRaw/PowerConsumption/Clei/ConnectorTypeRaw on the device ID entry describing form factor (QSFP, QSFP28, CFP-style CDFP, XFP, X2, etc. per SFF-8024), power class, and CLEI code, and cwsXcvrPluggableVendorTransmitterWavelength/EncodingDescription on the vendor transmitter entry — plus a separate cwsXcvrPluggableVendorOuiTable for the free-side device vendor's IEEE OUI. This gives detailed per-slot pluggable transceiver identity and capability data beyond generic transceiver monitoring, useful for confirming the correct optic type and vendor compliance is installed in each port. It depends on CIENA-WS-MIB, CIENA-WS-TYPEDEFS-MIB, and the base CIENA-WS-XCVR-MIB tables it augments, and is deployed on Ciena Waveserver optical platforms, per the CIENA-WS-XCVR-PLUGGABLE-MIB MIB.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-WS-XCVR-PLUGGABLE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena Waveserver optical transport platforms

Monitoring Examples

An operator polls cwsXcvrPluggableDeviceIdIdentifier and cwsXcvrPluggableDeviceIdPowerConsumption for each transceiver slot to confirm the installed pluggable is the expected form factor (e.g. qsfp28) and power class before provisioning a wavelength; a mismatch between the expected identifier and what cwsXcvrPluggableDeviceIdIdentifierRaw reports would indicate the wrong optic type was installed in that port.

What Can Be Monitored

pluggable transceiver form-factor/identifier objects
power consumption class per pluggable
vendor OUI and CLEI code
transmitter wavelength and encoding
revision compliance flags

Imported Objects

From CIENA-WS-MIB

cienaWsConfig

OBJECT-IDENTITY

From CIENA-WS-TYPEDEFS-MIB

ChannelsNumber
Decimal2Dig
StringMaxl16
StringMaxl32
XcvrId
XcvrSerdesRxAmplitude
XcvrSerdesRxEmphasis
XcvrSerdesTxEq

From CIENA-WS-XCVR-MIB

cwsXcvrChannelDiagnosticsEntry	OBJECT-TYPE
cwsXcvrDeviceIdEntry	OBJECT-TYPE
cwsXcvrVendorDiagnosticMonitoringEntry	OBJECT-TYPE
cwsXcvrVendorIdEntry	OBJECT-TYPE
cwsXcvrVendorTransmitterEntry	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cienaWsXcvrPluggableMIB	1.3.6.1.4.1.1271.3.4.17			This YANG module defines Ciena's XCVR common pluggable specific data for the NETCONF protocol. It will augment the ciena-ws-xcvr module.
cienaWsXcvrPluggableObjects	1.3.6.1.4.1.1271.3.4.17.1
cienaWsXcvrPluggableConformance	1.3.6.1.4.1.1271.3.4.17.2
cienaWsXcvrPluggableGroups	1.3.6.1.4.1.1271.3.4.17.2.1
cienaWsXcvrPluggableGroup	1.3.6.1.4.1.1271.3.4.17.2.1.1			Conformance Group
cienaWsXcvrPluggableCompliances	1.3.6.1.4.1.1271.3.4.17.2.2
cienaWsXcvrPluggableCompliance	1.3.6.1.4.1.1271.3.4.17.2.2.1			Compliance
cwsXcvrAugXcvrPluggableVendorIdTable	1.3.6.1.4.1.1271.3.4.17.3		not-accessible	None
cwsXcvrAugXcvrPluggableVendorIdEntry	1.3.6.1.4.1.1271.3.4.17.3.1		not-accessible	Entry for cwsXcvrAugXcvrPluggableVendorIdTable.
INT cwsXcvrPluggableVendorIdRevisionCompliance	1.3.6.1.4.1.1271.3.4.17.3.1.1	INTEGER	read-only	Revision Compliance flags, as defined in documentation for Common Management Interface, SFF-8636, table 6-3.
cwsXcvrPluggableVendorOuiTable	1.3.6.1.4.1.1271.3.4.17.4		not-accessible	Free side device vendor IEEE company ID. Defined in Common Management Interface, SFF-8636, table 6-15. 3 bytes of data.
cwsXcvrPluggableVendorOuiEntry	1.3.6.1.4.1.1271.3.4.17.4.1		not-accessible	Entry for cwsXcvrPluggableVendorOuiTable.
I32 cwsXcvrPluggableVendorOuiTableSnmpKey	1.3.6.1.4.1.1271.3.4.17.4.1.1	Integer32	not-accessible	Unique key for cwsXcvrPluggableVendorOui
U32 cwsXcvrPluggableVendorOui	1.3.6.1.4.1.1271.3.4.17.4.1.2	Unsigned32	read-only	Free side device vendor IEEE company ID. Defined in Common Management Interface, SFF-8636, table 6-15. 3 bytes of data.
cwsXcvrAugXcvrPluggableDeviceIdTable	1.3.6.1.4.1.1271.3.4.17.5		not-accessible	None
cwsXcvrAugXcvrPluggableDeviceIdEntry	1.3.6.1.4.1.1271.3.4.17.5.1		not-accessible	Entry for cwsXcvrAugXcvrPluggableDeviceIdTable.
INT cwsXcvrPluggableDeviceIdIdentifier	1.3.6.1.4.1.1271.3.4.17.5.1.1	INTEGER	read-only	Human readable description of Vendor's identifier byte value. Reference SFF-8024, table 4-1
STR cwsXcvrPluggableDeviceIdIdentifierRaw	1.3.6.1.4.1.1271.3.4.17.5.1.2	StringMaxl32	read-only	Vendor's identifier raw byte value. In the format of a HEX string. Reference SFF-8024, table 4-1
STR cwsXcvrPluggableDeviceIdExtendedIdentifierRaw	1.3.6.1.4.1.1271.3.4.17.5.1.3	StringMaxl32	read-only	Vendor's extended identifier raw byte value. In the format of a HEX string. Reference SFF-8436, table 4-1
INT cwsXcvrPluggableDeviceIdPowerConsumption	1.3.6.1.4.1.1271.3.4.17.5.1.4	INTEGER	read-only	The class of Power Consumption portion of the extended identifier byte, bit 7 to 6. Reference SFF-8436, section 7.6.2.2
STR cwsXcvrPluggableDeviceIdClei	1.3.6.1.4.1.1271.3.4.17.5.1.5	StringMaxl16	read-only	CLEI code. If bit4 in extended identifier is set to 1, show the CLEI code. If bit4 in extended identifier is set to 0, 'No CLEI code' will be shown. Reference SFF-8436, section 7.6.2.2 and section 7.6.4
STR cwsXcvrPluggableDeviceIdConnectorTypeRaw	1.3.6.1.4.1.1271.3.4.17.5.1.6	StringMaxl32	read-only	Vendor's connector type raw byte value. In the format of a HEX string. Reference SFF-8024, table 4-3
cwsXcvrAugXcvrPluggableVendorTransmitterTable	1.3.6.1.4.1.1271.3.4.17.6		not-accessible	None
cwsXcvrAugXcvrPluggableVendorTransmitterEntry	1.3.6.1.4.1.1271.3.4.17.6.1		not-accessible	Entry for cwsXcvrAugXcvrPluggableVendorTransmitterTable.
DEC cwsXcvrPluggableVendorTransmitterWavelength	1.3.6.1.4.1.1271.3.4.17.6.1.1	Decimal2Dig	read-only	Wave length value, in nanometers.
STR cwsXcvrPluggableVendorTransmitterWavelengthRaw	1.3.6.1.4.1.1271.3.4.17.6.1.2	StringMaxl32	read-only	Raw byte value of Wavelength, before any multiplier operation is done. In the format of a HEX string.
INT cwsXcvrPluggableVendorTransmitterEncodingDescription	1.3.6.1.4.1.1271.3.4.17.6.1.3	INTEGER	read-only	Human readable description of Device encoding mechanism. Some values may differ depending on if it is 8472 or 8x36. Reference SFF-8024, TABLE 4-2.
STR cwsXcvrPluggableVendorTransmitterEncodingRaw	1.3.6.1.4.1.1271.3.4.17.6.1.4	StringMaxl32	read-only	Raw byte value of Device encoding mechanism. Some values may differ depending on if it is 8472 or 8x36. In the format of a HEX string. Reference SFF-8024, TABLE 4-2.
cwsXcvrAugXcvrPluggableVendorDiagnosticMonitoringTable	1.3.6.1.4.1.1271.3.4.17.7		not-accessible	None
cwsXcvrAugXcvrPluggableVendorDiagnosticMonitoringEntry	1.3.6.1.4.1.1271.3.4.17.7.1		not-accessible	Entry for cwsXcvrAugXcvrPluggableVendorDiagnosticMonitoringTable.
STR cwsXcvrPluggableVendorDiagnosticMonitoringDiagnosticMonitoringTypeRaw	1.3.6.1.4.1.1271.3.4.17.7.1.1	StringMaxl32	read-only	Display the raw byte value of Diagnostic Monitoring Type, in the format of a HEX string. Reference SFF 8472 section 8.8 and table 9.5 for detail.
T/F cwsXcvrPluggableVendorDiagnosticMonitoringDiagnosticMonitoringImplemented	1.3.6.1.4.1.1271.3.4.17.7.1.2	TruthValue	read-only	If Digital diagnostic monitoring is implemented, determined by bit 6 of diagnostic monitoring type. Reference SFF 8472 section 8.8 and table 9.5 for detail.
cwsXcvrPluggableTransceiverCodeTable	1.3.6.1.4.1.1271.3.4.17.8		not-accessible	None
cwsXcvrPluggableTransceiverCodeEntry	1.3.6.1.4.1.1271.3.4.17.8.1		not-accessible	Entry for cwsXcvrPluggableTransceiverCodeTable.
I32 cwsXcvrPluggableTransceiverCodeTableSnmpKey	1.3.6.1.4.1.1271.3.4.17.8.1.1	Integer32	not-accessible	Unique key for cwsXcvrPluggableTransceiverCode
BIT cwsXcvrPluggableTransceiverCodeSpecificationCompliance	1.3.6.1.4.1.1271.3.4.17.8.1.2	Bits	read-write	10 GbE ethernet, 40 GbE ethernet, and 100 GbE extended specification compliance of the transceiver. In the form of a YANG bit field. Note, the bit field in this node is not mapped with the SFF tables. Reference SFF-8436 table 33 for specification compliance of 10 GbE and 40 GbE Ethernet. Reference SFF-8024, TABLE 4-4 for extended specification compliance of 100 GbE.
STR cwsXcvrPluggableTransceiverCodeTransceiverCodeRaw	1.3.6.1.4.1.1271.3.4.17.8.1.3	StringMaxl32	read-only	Specification Compliance/Transceiver Code raw byte value. In the format of a HEX string. Reference SFF-8436 table 33 for specification compliance
cwsXcvrPluggableDeviceTechnologyTable	1.3.6.1.4.1.1271.3.4.17.9		not-accessible	None
cwsXcvrPluggableDeviceTechnologyEntry	1.3.6.1.4.1.1271.3.4.17.9.1		not-accessible	Entry for cwsXcvrPluggableDeviceTechnologyTable.
I32 cwsXcvrPluggableDeviceTechnologyTableSnmpKey	1.3.6.1.4.1.1271.3.4.17.9.1.1	Integer32	not-accessible	Unique key for cwsXcvrPluggableDeviceTechnology
STR cwsXcvrPluggableDeviceTechnologyDeviceTechnologyRaw	1.3.6.1.4.1.1271.3.4.17.9.1.2	StringMaxl32	read-only	Display the raw byte value of Device Technology, in the format of a HEX string. Reference SFF 8636 table 6-19.
T/F cwsXcvrPluggableDeviceTechnologyTransmitterTunable	1.3.6.1.4.1.1271.3.4.17.9.1.3	TruthValue	read-only	Device Technology Transmitter tuneable value. Reference SFF 8636 table 6-19, bit 0.
U32 cwsXcvrPluggableDeviceTechnologyMaxCaseTemperature	1.3.6.1.4.1.1271.3.4.17.9.1.4	Unsigned32	read-only	Maximum Case Temperature. In degrees C.
cwsXcvrPluggableOptionsTable	1.3.6.1.4.1.1271.3.4.17.10		not-accessible	None
cwsXcvrPluggableOptionsEntry	1.3.6.1.4.1.1271.3.4.17.10.1		not-accessible	Entry for cwsXcvrPluggableOptionsTable.
I32 cwsXcvrPluggableOptionsTableSnmpKey	1.3.6.1.4.1.1271.3.4.17.10.1.1	Integer32	not-accessible	Unique key for cwsXcvrPluggableOptions
STR cwsXcvrPluggableOptionsOptionsRaw	1.3.6.1.4.1.1271.3.4.17.10.1.2	StringMaxl32	read-only	Raw byte value of 'options' field. In the format of a HEX string. Reference SFF 8636 table 6-22.
T/F cwsXcvrPluggableOptionsTxinpeqautoadaptcapable	1.3.6.1.4.1.1271.3.4.17.10.1.3	TruthValue	read-only	A bit flag in 'options', reference SFF 8636 table 6-22.
T/F cwsXcvrPluggableOptionsTxinpeqfixedprogramsetting	1.3.6.1.4.1.1271.3.4.17.10.1.4	TruthValue	read-only	A bit flag in 'options', reference SFF 8636 table 6-22.
T/F cwsXcvrPluggableOptionsRxoutemfixedprogramsetting	1.3.6.1.4.1.1271.3.4.17.10.1.5	TruthValue	read-only	A bit flag in 'options', reference SFF 8636 table 6-22.
T/F cwsXcvrPluggableOptionsRxoutamfixedprogramsetting	1.3.6.1.4.1.1271.3.4.17.10.1.6	TruthValue	read-only	A bit flag in 'options', reference SFF 8636 table 6-22.
T/F cwsXcvrPluggableOptionsTxCdrLossOfLockFlag	1.3.6.1.4.1.1271.3.4.17.10.1.7	TruthValue	read-only	A bit flag in 'options', reference SFF 8636 table 6-22.
T/F cwsXcvrPluggableOptionsRxCdrLossOfLockFlag	1.3.6.1.4.1.1271.3.4.17.10.1.8	TruthValue	read-only	A bit flag in 'options', reference SFF 8636 table 6-22.
T/F cwsXcvrPluggableOptionsUserEepromPage02hProvided	1.3.6.1.4.1.1271.3.4.17.10.1.9	TruthValue	read-only	A bit flag in 'options', reference SFF 8636 table 6-22.
T/F cwsXcvrPluggableOptionsAstPage01hProvided	1.3.6.1.4.1.1271.3.4.17.10.1.10	TruthValue	read-only	A bit flag in 'options', reference SFF 8636 table 6-22.
cwsXcvrPluggableSupplyVoltageTable	1.3.6.1.4.1.1271.3.4.17.11		not-accessible	None
cwsXcvrPluggableSupplyVoltageEntry	1.3.6.1.4.1.1271.3.4.17.11.1		not-accessible	Entry for cwsXcvrPluggableSupplyVoltageTable.
I32 cwsXcvrPluggableSupplyVoltageTableSnmpKey	1.3.6.1.4.1.1271.3.4.17.11.1.1	Integer32	not-accessible	Unique key for cwsXcvrPluggableSupplyVoltage
DEC cwsXcvrPluggableSupplyVoltageActual	1.3.6.1.4.1.1271.3.4.17.11.1.2	Decimal2Dig	read-only	Supply voltage, actual supply voltage in volts (V). Range must be between 0 and 6.55V.
cwsXcvrPluggableStatusTable	1.3.6.1.4.1.1271.3.4.17.12		not-accessible	None
cwsXcvrPluggableStatusEntry	1.3.6.1.4.1.1271.3.4.17.12.1		not-accessible	Entry for cwsXcvrPluggableStatusTable.
I32 cwsXcvrPluggableStatusTableSnmpKey	1.3.6.1.4.1.1271.3.4.17.12.1.1	Integer32	not-accessible	Unique key for cwsXcvrPluggableStatus
T/F cwsXcvrStatusHighAlarmStatus	1.3.6.1.4.1.1271.3.4.17.12.1.2	TruthValue	read-only	Supply voltage high alarm status, boolean, true if alarm is raised, false if alarm is not raised.
T/F cwsXcvrStatusLowAlarmStatus	1.3.6.1.4.1.1271.3.4.17.12.1.3	TruthValue	read-only	Supply voltage low alarm status, boolean, true if alarm is raised, false if alarm is not raised.
T/F cwsXcvrStatusHighWarningStatus	1.3.6.1.4.1.1271.3.4.17.12.1.4	TruthValue	read-only	Supply voltage high warning status, boolean, true if warning is raised, false if warning is not raised.
T/F cwsXcvrStatusLowWarningStatus	1.3.6.1.4.1.1271.3.4.17.12.1.5	TruthValue	read-only	Supply voltage low warning status, boolean, true if warning is raised, false if warning is not raised.
cwsXcvrPluggableThresholdTable	1.3.6.1.4.1.1271.3.4.17.13		not-accessible	None
cwsXcvrPluggableThresholdEntry	1.3.6.1.4.1.1271.3.4.17.13.1		not-accessible	Entry for cwsXcvrPluggableThresholdTable.
I32 cwsXcvrPluggableThresholdTableSnmpKey	1.3.6.1.4.1.1271.3.4.17.13.1.1	Integer32	not-accessible	Unique key for cwsXcvrPluggableThreshold
DEC cwsXcvrThresholdHighAlarmThreshold	1.3.6.1.4.1.1271.3.4.17.13.1.2	Decimal2Dig	read-only	Supply voltage high alarm threshold, in volts (V).
DEC cwsXcvrThresholdLowAlarmThreshold	1.3.6.1.4.1.1271.3.4.17.13.1.3	Decimal2Dig	read-only	Supply oltage low alarm threshold, in volts (V).
DEC cwsXcvrThresholdHighWarningThreshold	1.3.6.1.4.1.1271.3.4.17.13.1.4	Decimal2Dig	read-only	Supply voltage high warning threshold, in volts (V).
DEC cwsXcvrThresholdLowWarningThreshold	1.3.6.1.4.1.1271.3.4.17.13.1.5	Decimal2Dig	read-only	Supply voltage low warning threshold, in volts (V).
cwsXcvrAugXcvrPluggableChannelDiagnosticsTable	1.3.6.1.4.1.1271.3.4.17.14		not-accessible	None
cwsXcvrAugXcvrPluggableChannelDiagnosticsEntry	1.3.6.1.4.1.1271.3.4.17.14.1		not-accessible	Entry for cwsXcvrAugXcvrPluggableChannelDiagnosticsTable.
T/F cwsXcvrPluggableChannelDiagnosticsTransmitterFault	1.3.6.1.4.1.1271.3.4.17.14.1.1	TruthValue	read-only	If the xcvr channel transmitter has detected a fault.
T/F cwsXcvrPluggableChannelDiagnosticsTxAdaptiveEqFault	1.3.6.1.4.1.1271.3.4.17.14.1.2	TruthValue	read-only	If the xcvr channel Tx Adaptive EQ Fault has detected a fault. Only applicable for QSFP28. For QSFP+, default value of FALSE will be returned.
cwsXcvrPluggableSerdesConfigTable	1.3.6.1.4.1.1271.3.4.17.15		not-accessible	None
cwsXcvrPluggableSerdesConfigEntry	1.3.6.1.4.1.1271.3.4.17.15.1		not-accessible	Entry for cwsXcvrPluggableSerdesConfigTable.
I32 cwsXcvrPluggableSerdesConfigTableSnmpKey	1.3.6.1.4.1.1271.3.4.17.15.1.1	Integer32	not-accessible	Unique key for cwsXcvrPluggableSerdesConfig
XCV cwsXcvrSerdesConfigSerdesTxEq	1.3.6.1.4.1.1271.3.4.17.15.1.2	XcvrSerdesTxEq	read-write	None
XCV cwsXcvrSerdesConfigSerdesRxAmplitude	1.3.6.1.4.1.1271.3.4.17.15.1.3	XcvrSerdesRxAmplitude	read-write	None
XCV cwsXcvrSerdesConfigSerdesRxEmphasis	1.3.6.1.4.1.1271.3.4.17.15.1.4	XcvrSerdesRxEmphasis	read-write	None

RFC description

Management Information Base for Ciena pluggable transceiver modules. Provides objects for monitoring transceiver type, vendor identification, part numbers, serial numbers, operational modes, and channel configurations.

Start monitoring Ciena WaveServer optical transport platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIENA-WS-XCVR-PLUGGABLE-MIB

What Is CIENA-WS-XCVR-PLUGGABLE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description