All MIBs › CIE1000-PORT-MIB › cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairD
cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairD
Module: CIE1000-PORT-MIB
OID (symbolic): CIE1000-PORT-MIB::cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairD
OID (numeric): 1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.9
Node type: OBJECT-TYPE
Type: CIE1000Unsigned8
Access: read-only
Description: VeriPhy status cable length i meters for the cable pair. When VeriPhy is completed, the cable diagnostics results is shown in the VeriPhy status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters.
The resolution is 3 meters
What is cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairD?
Reports the estimated cable length in meters (3-meter resolution) for wire pair D as measured by the VeriPHY cable diagnostic tool, valid for cables roughly 7-140 meters.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.9 snmpwalk -v2c -c public <target> CIE1000-PORT-MIB::cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairD
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.9.1 snmpget -v2c -c public <target> CIE1000-PORT-MIB::cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairD.1
Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIE1000-PORT-MIB::cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairD OID value, configure state conditions and alerts, and monitor any Cisco IE1000 industrial Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.832 | ciscoIE1000MIB | CISCO-IE1000-MIB |
| 1.3.6.1.4.1.9.9.832.1 | cie1000SwitchMgmt | CISCO-IE1000-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.832.1.11 | cie1000PortMib | CIE1000-PORT-MIB |
| 1.3.6.1.4.1.9.9.832.1.11.1 | cie1000PortMibObjects | CIE1000-PORT-MIB |
| 1.3.6.1.4.1.9.9.832.1.11.1.3 | cie1000PortStatus | CIE1000-PORT-MIB |
| 1.3.6.1.4.1.9.9.832.1.11.1.3.3 | cie1000PortStatusVeriPhyResult | CIE1000-PORT-MIB |
| 1.3.6.1.4.1.9.9.832.1.11.1.3.3.1 | cie1000PortStatusVeriPhyResultTable | CIE1000-PORT-MIB |
| 1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1 | cie1000PortStatusVeriPhyResultEntry | CIE1000-PORT-MIB |
| 1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.9 | cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairD | CIE1000-PORT-MIB |