All MIBs › CENTRECOM-SYSTEM-MIB › atiImageToUseOnReboot
atiImageToUseOnReboot
Module: CENTRECOM-SYSTEM-MIB
OID (symbolic): CENTRECOM-SYSTEM-MIB::atiImageToUseOnReboot
OID (numeric): 1.3.6.1.4.1.207.8.12.2.3.15
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls which image will be used on next reboot.
What is atiImageToUseOnReboot?
This read-write selector pre-stages which of the two firmware image slots the switch will boot from the next time it restarts, separate from configuration bank selection handled by atiConfigToUseOnReboot. It's the object an admin flips after confirming a new firmware image is correctly loaded into the secondary slot, so the switch picks it up on the next scheduled reboot rather than immediately. If the new firmware causes boot failures, setting this back to primary(1) lets the admin fall back to the known-good image on the following reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.12.2.3.15 snmpwalk -v2c -c public <target> CENTRECOM-SYSTEM-MIB::atiImageToUseOnReboot
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.12.2.3.15.1 snmpget -v2c -c public <target> CENTRECOM-SYSTEM-MIB::atiImageToUseOnReboot.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.12.2.3.15.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> atiImageToUseOnReboot.1
Start monitoring Allied Telesis CentreCOM Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CENTRECOM-SYSTEM-MIB::atiImageToUseOnReboot OID value, configure state conditions and alerts, and monitor any Allied Telesis CentreCOM Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.12 | atkkSwitchMIB | CENTRECOM-MIB |
| 1.3.6.1.4.1.207.8.12.2 | extSwitchMIB | CENTRECOM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.12.2.3 | atiSwitchSystem | CENTRECOM-SYSTEM-MIB |
| 1.3.6.1.4.1.207.8.12.2.3.15 | atiImageToUseOnReboot | CENTRECOM-SYSTEM-MIB |