All MIBs › CENTRECOM-SYSTEM-MIB › atiConfigToUseOnReboot
atiConfigToUseOnReboot
Module: CENTRECOM-SYSTEM-MIB
OID (symbolic): CENTRECOM-SYSTEM-MIB::atiConfigToUseOnReboot
OID (numeric): 1.3.6.1.4.1.207.8.12.2.3.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls which NVRAM configuration store will be used on next reboot.
What is atiConfigToUseOnReboot?
This read-write flag pre-selects which of the two saved configuration banks the switch will load the next time it restarts, independent of which bank is currently active. It lets an admin stage a configuration change, save a new config to the secondary bank, point this at secondary(2), then reboot, without immediately disrupting the running switch. If the new config causes problems after reboot, the admin can set this back to primary(1) and reboot again to revert.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.207.8.12.2.3.6 snmpwalk -v2c -c public <target> CENTRECOM-SYSTEM-MIB::atiConfigToUseOnReboot
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.207.8.12.2.3.6.1 snmpget -v2c -c public <target> CENTRECOM-SYSTEM-MIB::atiConfigToUseOnReboot.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.207.8.12.2.3.6.1 i <value>
Start monitoring Allied Telesis CentreCOM Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CENTRECOM-SYSTEM-MIB::atiConfigToUseOnReboot OID value, configure state conditions and alerts, and monitor any Allied Telesis CentreCOM Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.207 | alliedTelesyn | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8 | mibObject | AT-RG600-MIB |
| 1.3.6.1.4.1.207.8.12 | atkkSwitchMIB | CENTRECOM-MIB |
| 1.3.6.1.4.1.207.8.12.2 | extSwitchMIB | CENTRECOM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.207.8.12.2.3 | atiSwitchSystem | CENTRECOM-SYSTEM-MIB |
| 1.3.6.1.4.1.207.8.12.2.3.6 | atiConfigToUseOnReboot | CENTRECOM-SYSTEM-MIB |