All MIBs › CDR-DS1-MIB
Organization: Lucent Technologies
Last Updated: 240701
Category: Network Interfaces
Description: Manages CDR/Kentrox DS1 (T1) channel service unit configuration, line statistics, and alarm status monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CDR-DS1-MIB?
CDR-DS1-MIB is a vendor-specific MIB associated with CDR/Kentrox DS1 (T1) channel service unit/data service unit (CSU/DSU) equipment, used to manage T1 line configuration, statistics, and alarm conditions. It exposes configuration data for the DS1 line interface along with performance statistics counters and alarm/status indicators reflecting the health of the T1 circuit. In monitoring terms it is used to track the physical and framing health of a T1 line -- including error statistics and alarm conditions such as loss of signal or frame slips -- which are the primary indicators of a degraded or failing leased-line circuit. It likely complements or overlaps conceptually with the IETF standard DS1/E1 MIB (RFC 3895 lineage) though as a vendor variant it is not guaranteed to be identical. It would typically be deployed on Kentrox/CDR CSU/DSU units terminating T1 leased lines at a customer premises or carrier access point. Engineers can download the CDR-DS1-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CDR-DS1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Lucent SoftSwitch CDR (Call Detail Record) Device Server
Monitoring Examples
No detailed sample objects were provided in the source (the module description is a generic placeholder), so specific object names cannot be honestly cited beyond the general DS1 line statistics and alarm category implied by the module name. In general use, an administrator would poll this MIB's line statistics and alarm objects to detect degraded T1 signal quality, framing errors, or loss-of-signal conditions on the circuit.
What Can Be Monitored
- DS1 line alarm status
- line error statistics
- line configuration parameters
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| enterprises |
From RFC1213-MIB
| DisplayString |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| ObjectName | |
| snmpModules |
From SNMPv2-TC
| RowStatus | |
| TestAndIncr | |
| TimeStamp | |
| TruthValue |
OIDs
RFC description
MIB module for Call Detail Record device servers in softswitch systems.
Start monitoring Lucent SoftSwitch CDR (Call Detail Record) Device Server with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.