CADANT-L2VPN-MIB

All MIBs › CADANT-L2VPN-MIB

Organization: Arris International, Inc.

Last Updated: 2015-10-01

Category: DOCSIS and Cable, Vendor: ARRIS

Description: Manages Layer 2 VPN service configuration and status on ARRIS/Cadant CMTS for business service delivery.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CADANT-L2VPN-MIB?

CADANT-L2VPN-MIB is an ARRIS/Cadant proprietary MIB for configuring and monitoring Layer 2 VPN (L2VPN) service delivery on Cadant CMTS platforms, typically used to offer business Ethernet/L2VPN services over a DOCSIS cable access network. It exposes network-interface designation for primary/secondary/active L2VPN uplinks, global service settings (like the 802.1Q TPID used for tagging), cable-modem L2VPN capability flags, and a per-interface table controlling IGMP snooping and row-status for L2VPN interfaces. For monitoring hardware/software status, cadL2vpnActiveNetworkIfIndex reveals which physical network interface is currently carrying L2VPN traffic (confirming failover from primary to secondary uplink actually occurred), and cadL2vpnForwardingEnabled/cadL2vpnInterfaceRowStatus reveal whether the service and specific interfaces are administratively active. This MIB is CMTS/DOCSIS-specific and complements the standard DOCSIS cable-modem and interface MIBs on the same platform for a complete service picture. Typical deployment context is a cable operator's Cadant CMTS chassis delivering business-class L2VPN transport service to enterprise customers over a shared DOCSIS network. Engineers can download the CADANT-L2VPN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CADANT-L2VPN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS/Cadant CMTS (Cable Modem Termination System)

Monitoring Examples

An operator would check cadL2vpnActiveNetworkIfIndex against cadL2vpnPrimaryNetworkIfIndex/cadL2vpnSecondaryNetworkIfIndex to confirm whether the L2VPN service has failed over to its secondary uplink, which combined with cadL2vpnForwardingEnabled being false would indicate a service outage. cadL2vpnInterfaceTable/cadL2vpnInterfaceEntry, keyed by cadL2vpnInterfaceIfIndex, would be polled for cadL2vpnInterfaceRowStatus to confirm a customer's L2VPN interface is provisioned and active, and cadL2vpnInterfaceIpIgmpSnooping to verify multicast handling for that circuit. cadL2vpnCmCapEsafeIdentRequired and cadL2vpnCmCapDutFilterRequired reflect cable-modem-side capability requirements relevant to service eligibility.

What Can Be Monitored

active/primary/secondary L2VPN network interface
L2VPN forwarding enabled state
per-interface row status (provisioned/active)
IGMP snooping configuration per L2VPN interface
cable-modem L2VPN capability flags

Imported Objects

From CADANT-PRODUCTS-MIB

cadL2vpn

OBJECT-IDENTITY

From CLAB-DEF-MIB

DocsL2vpnIfList
clabProjDocsis	OBJECT-IDENTITY

From DOCS-IF-MIB

docsIfCmtsCmStatusIndex

OBJECT-TYPE

From DOCS-L2VPN-MIB

DocsL2vpnIdentifier
DocsL2vpnIndex
DocsNsiEncapSubtype
docsL2vpnIdx	OBJECT-TYPE

From DOCS-QOS3-MIB

docsQosPktClassId	OBJECT-TYPE
docsQosServiceFlowId	OBJECT-TYPE

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cerL2vpnCmStatsUpstreamPkts OID:

Select an ARRIS/Cadant C4/E6000 CMT (cable modem termination system) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cerL2vpnCmStatsUpstreamPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of L2vpn-forwarded packets received from this instance's Cable Modem on this instance's L2VPN. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NUM cadL2vpnActiveNetworkIfIndex	1.3.6.1.4.1.4998.1.1.120.1.1.1.3	InterfaceIndexOrZero	read-only	ifIndex of the currently active physical netowrk interface being used for L2VPN traffic. Zero if no active L2VPN network interface is up.
T/F cadL2vpnCmCapDutFilterRequired	1.3.6.1.4.1.4998.1.1.120.1.1.1.6	TruthValue	read-write	When true Downstream Unencrypted Traffic (DUT) filter capability TLV is required in REG-REQ message, otherwise the CM registration will be rejected if L2VPN TLVs are present. When false a CM may register without this capability TLV.
T/F cadL2vpnCmCapEsafeIdentRequired	1.3.6.1.4.1.4998.1.1.120.1.1.1.5	TruthValue	read-write	When true eSAFE identity TLVs are required in REG-REQ message otherwise the CM registration will be rejected if L2VPN TLVs are present. When false a CM may register without these capability TLVs.
MAC cadL2vpnDenyForwardingCmMac	1.3.6.1.4.1.4998.1.1.120.1.1.9.1.4	MacAddress	read-create	When it is specified, data forwarding of all the VLANid within this CM will be disabled.
cadL2vpnDenyForwardingEntry	1.3.6.1.4.1.4998.1.1.120.1.1.9.1		not-accessible	An entry in this table can be a VPN Id, CM MAC or VLAN id. When a row is created or removed, SCM will set the associated VLANid cadL2vpnCmForwardingEnabled to true(1) or false(2).
U32 cadL2vpnDenyForwardingIndex	1.3.6.1.4.1.4998.1.1.120.1.1.9.1.1	Unsigned32	not-accessible	The index of this table.
I32 cadL2vpnDenyForwardingInstanceId	1.3.6.1.4.1.4998.1.1.120.1.1.9.1.3	Integer32	read-create	When it is specified, data forwarding of this VLAN instance will be disabled.
IP cadL2vpnDenyForwardingMplsPeerIp	1.3.6.1.4.1.4998.1.1.120.1.1.9.1.6	InetAddress	read-create	When it is specified, data forwarding of all the L2VPN Instances that have MPLS PW going to this peer will be disabled
ROW cadL2vpnDenyForwardingRowStatus	1.3.6.1.4.1.4998.1.1.120.1.1.9.1.5	RowStatus	read-create	row status of this table entry.
cadL2vpnDenyForwardingTable	1.3.6.1.4.1.4998.1.1.120.1.1.9		not-accessible	This table provides the L2VPN-specific deny data forwarding list. The index of this table is an arbitrary number.
OCT cadL2vpnDenyForwardingVpnId	1.3.6.1.4.1.4998.1.1.120.1.1.9.1.2	OCTET STRING	read-create	When it is specified, data forwarding of all the VLANid within this VPN ID will be disabled.
T/F cadL2vpnForwardingEnabled	1.3.6.1.4.1.4998.1.1.120.1.1.1.4	TruthValue	read-write	The global L2VPN forwarding state. The default is false(2).
INT cadL2vpnGlobalTpid	1.3.6.1.4.1.4998.1.1.120.1.1.1.7	INTEGER	read-write	802.1QinQ tpid ethertype value.
cadL2vpnIdxToCmVpnInstEntry	1.3.6.1.4.1.4998.1.1.120.1.1.6.1		not-accessible	contain a L2VPN Instance entry
cadL2vpnIdxToCmVpnInstTable	1.3.6.1.4.1.4998.1.1.120.1.1.6		not-accessible	This table contains all the VPN instances ordered by VPN Index, CM MAC and VPN Instance ID.
I32 cadL2vpnInstanceId	1.3.6.1.4.1.4998.1.1.120.1.1.4.1.1	Integer32	not-accessible	The 24-bit L2VPN instance identifier composed from 2 12-bit VLANids assigned to the L2VPN instance.
MAC cadL2vpnInstanceIdCmMac	1.3.6.1.4.1.4998.1.1.120.1.1.4.1.4	MacAddress	read-only	CM MAC address of this L2VPN Instance.
cadL2vpnInstanceIdToCmEntry	1.3.6.1.4.1.4998.1.1.120.1.1.4.1		not-accessible	contain a L2VPN Instance entry
cadL2vpnInstanceIdToCmTable	1.3.6.1.4.1.4998.1.1.120.1.1.4		not-accessible	L2 VLANid instance table.
I32 cadL2vpnInstanceIdVlanIdInner	1.3.6.1.4.1.4998.1.1.120.1.1.4.1.3	Integer32	read-only	Inner VLANid of this L2VPN Instance.
I32 cadL2vpnInstanceIdVlanIdOuter	1.3.6.1.4.1.4998.1.1.120.1.1.4.1.2	Integer32	read-only	Outer VLANid of this L2VPN Instance.
OID cadL2vpnInstanceIdVpnId	1.3.6.1.4.1.4998.1.1.120.1.1.4.1.5	DocsL2vpnIdentifier	read-only	VPN ID of this L2VPN Instance.
cadL2vpnInterfaceEntry	1.3.6.1.4.1.4998.1.1.120.1.1.2.1		not-accessible	each interface must be a unique DOCSIS 3.0 cable MAC interface
NUM cadL2vpnInterfaceIfIndex	1.3.6.1.4.1.4998.1.1.120.1.1.2.1.1	InterfaceIndex	not-accessible	Cable MAC layer ifIndex for this interface.
T/F cadL2vpnInterfaceIpIgmpSnooping	1.3.6.1.4.1.4998.1.1.120.1.1.2.1.2	TruthValue	read-create	If set to true(1), this attribute enables the L2VPN IGMP Snooping feature on this cable-mac interface. If set to false(2), this attribute disables the L2VPN IGMP Snooping feature on this cable-mac interface. The default is false(2).
ROW cadL2vpnInterfaceRowStatus	1.3.6.1.4.1.4998.1.1.120.1.1.2.1.3	RowStatus	read-create	Row Status for this table.
cadL2vpnInterfaceTable	1.3.6.1.4.1.4998.1.1.120.1.1.2		not-accessible	L2VPN interface table contains an entry for each cable MAC interface declared for use with L2VPNs.
cadL2vpnMIB	1.3.6.1.4.1.4998.1.1.120.1			This is the management MIB contains Cadant proprietary L2VPN MIB information. Copyright 2009 Arris International, Inc. All rights reserved.
cadL2vpnMIBObjects	1.3.6.1.4.1.4998.1.1.120.1.1
cadL2vpnMplsPeerIpToCmEntry	1.3.6.1.4.1.4998.1.1.120.1.1.12.1		not-accessible	contain a L2VPN Instance entry
cadL2vpnMplsPeerIpToCmTable	1.3.6.1.4.1.4998.1.1.120.1.1.12		not-accessible	This table contains all MPLS L2VPN instances with no auto-discovery ordered by MPLS Peer IP, CM MAC and VPN ID.
cadL2vpnParams	1.3.6.1.4.1.4998.1.1.120.1.1.1
DOC cadL2vpnPktClassCMIM	1.3.6.1.4.1.4998.1.1.120.1.1.8.1.4	DocsL2vpnIfList	read-only	The Cable Modem Interface Mask (CMIM) signaled in a Packet Classifier Encoding. In a Downstream Packet Classifier Encoding, a specified CMIM value restricts the classifier to match packets with a Destination MAC address corresponding to the interfaces indicated in the CMIM mask. The eCM self and any eSAFE interface bits correspond to the individual eCM and eSAFE host MAC addresses. In an Upstream Packet Classifier encoding, a specified CMIM value restricts the classifier to match packets with an ingress bridge port interface matching the bits in the CMIM value. If the CMIM subtype was omitted, this object should be reported as a zero length octet string.
cadL2vpnPktClassEntry	1.3.6.1.4.1.4998.1.1.120.1.1.8.1		not-accessible	An entry in this table extends a single row of docsQosPktClassTable for a rule that applies only to downstream L2VPN forwarded packets. The index ifIndex is an ifType of docsCableMaclayer(127).
OID cadL2vpnPktClassL2vpnId	1.3.6.1.4.1.4998.1.1.120.1.1.8.1.1	DocsL2vpnIdentifier	read-only	The locally assigned L2VPN index corresponding to the VPN Identifier subtype of a Downstream Classifier L2VPN Encoding.
cadL2vpnPktClassTable	1.3.6.1.4.1.4998.1.1.120.1.1.8		not-accessible	This table provides the L2VPN-specific objects for packet classifiers that apply to only L2VPN traffic. The indices of this table are a subset of the indices of classifiers in docsQosPktClassTable.
U32 cadL2vpnPktClassUserPriRangeHigh	1.3.6.1.4.1.4998.1.1.120.1.1.8.1.3	Unsigned32	read-only	The higher priority of the user Priority Range subtype of a Downstream Classifier L2VPN Encoding. If the subtype was omitted, this object has value 7.
U32 cadL2vpnPktClassUserPriRangeLow	1.3.6.1.4.1.4998.1.1.120.1.1.8.1.2	Unsigned32	read-only	The lower priority of the user Priority Range subtype of a Downstream Classifier L2VPN Encoding. If the subtype was omitted, this object has value 0.
OCT cadL2vpnPktClassVendorSpecific	1.3.6.1.4.1.4998.1.1.120.1.1.8.1.5	OCTET STRING	read-only	This object provides the set of configured Vendor Specific subtypes within a Packet Classifier Encoding for a CM. If no Vendor Specific subtype was specified, this object is a zero length octet string. If one or more Vendor Specific subtype parameters was specified, this object represents the concatenation of all such subtypes.
NUM cadL2vpnPrimaryNetworkIfIndex	1.3.6.1.4.1.4998.1.1.120.1.1.1.1	InterfaceIndexOrZero	read-write	ifIndex of the primary physical netowrk interface used for L2VPN traffic. Zero if no primary L2VPN network interface is configured.
cadL2vpnProvisionedCmEntry	1.3.6.1.4.1.4998.1.1.120.1.1.13.1		not-accessible	An entry contains a CM that is statically provisioned with L2VPNs. The CM MAC address is the unique key to an entry.
cadL2vpnProvisionedCmEsafeEntry	1.3.6.1.4.1.4998.1.1.120.1.1.14.1		not-accessible	An entry contains a Esafe device that is statically provisioned behind a CM that is excluded from the L2VPN tunnel.
INT cadL2vpnProvisionedCmEsafeIfIndex	1.3.6.1.4.1.4998.1.1.120.1.1.14.1.2	INTEGER	read-create	The provisioned eSAFE's ifindex value.
MAC cadL2vpnProvisionedCmEsafeMacAddress	1.3.6.1.4.1.4998.1.1.120.1.1.14.1.1	MacAddress	not-accessible	The eSAFE MAC address used as a key to this table.
ROW cadL2vpnProvisionedCmEsafeRowStatus	1.3.6.1.4.1.4998.1.1.120.1.1.14.1.3	RowStatus	read-create	Row insertion and deletion.
cadL2vpnProvisionedCmEsafeTable	1.3.6.1.4.1.4998.1.1.120.1.1.14		not-accessible	This table contains all eSAFE devices that are statically provisioned behind a CM that are excluded from the L2VPN tunnel. This MIB is maintained by the CLI commands.
I32 cadL2vpnProvisionedCmInnerVlanId	1.3.6.1.4.1.4998.1.1.120.1.1.13.1.4	Integer32	read-create	The provisoned CM's L2VPN inner VLAN id.
OID cadL2vpnProvisionedCmL2vpnId	1.3.6.1.4.1.4998.1.1.120.1.1.13.1.2	DocsL2vpnIdentifier	read-create	The provisioned CM's string form of the L2VPNid.
MAC cadL2vpnProvisionedCmMacAddress	1.3.6.1.4.1.4998.1.1.120.1.1.13.1.1	MacAddress	not-accessible	The CM MAC address used as a unique key to this table.
I32 cadL2vpnProvisionedCmOuterVlanId	1.3.6.1.4.1.4998.1.1.120.1.1.13.1.3	Integer32	read-create	The provisoned CM's L2VPN outer VLAN id.
ROW cadL2vpnProvisionedCmRowStatus	1.3.6.1.4.1.4998.1.1.120.1.1.13.1.5	RowStatus	read-create	Row insertion and deletion.
cadL2vpnProvisionedCmTable	1.3.6.1.4.1.4998.1.1.120.1.1.13		not-accessible	This table contains all CMs that are statically provisioned with L2VPNs.
NUM cadL2vpnSecondaryNetworkIfIndex	1.3.6.1.4.1.4998.1.1.120.1.1.1.2	InterfaceIndexOrZero	read-write	ifIndex of the secondary physical netowrk interface used for L2VPN traffic. Zero if no secondary L2VPN network interface is configured.
U32 cadL2vpnVlanIdRangeBegin	1.3.6.1.4.1.4998.1.1.120.1.1.3.1.1	Unsigned32	not-accessible	Begin range from VLANid.
U32 cadL2vpnVlanIdRangeEnd	1.3.6.1.4.1.4998.1.1.120.1.1.3.1.2	Unsigned32	not-accessible	End range of VLANid. Must be greater than or equal to cadL2vpnVlanIdRangeBegin.
cadL2vpnVlanIdRangeEntry	1.3.6.1.4.1.4998.1.1.120.1.1.3.1		not-accessible	contain a VPN VLANid range entry
INT cadL2vpnVlanIdRangeNsiEncapSubtype	1.3.6.1.4.1.4998.1.1.120.1.1.3.1.3	INTEGER	read-create	NSI Encapsulation subtype of the VLANid.
ROW cadL2vpnVlanIdRangeRowStatus	1.3.6.1.4.1.4998.1.1.120.1.1.3.1.4	RowStatus	read-create	Row Status for this table.
cadL2vpnVlanIdRangeTable	1.3.6.1.4.1.4998.1.1.120.1.1.3		not-accessible	VPN VLANid range table. Contains ranges of outer VLANids declared for use with L2VPNs and L3VPNs.
DOC cadL2vpnVpnIdx	1.3.6.1.4.1.4998.1.1.120.1.1.6.1.1	DocsL2vpnIndex	read-only	An internally assigned index value for a known VLAD ID. Refer docsL2vpnIdx.
U32 cerL2vpnCmBgpCeVeId	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.26	Unsigned32	read-only	This is the 2 byte long CE-ID/VE-ID for L2VPN with BGP auto-discovery and signaling.
OCT cerL2vpnCmBgpRd	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.23	OCTET STRING	read-only	BGP Route Distinguisher for L2VPN BGP auto-discovery (8 bytes long)
OCT cerL2vpnCmBgpRtExport	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.25	OCTET STRING	read-only	BGP Route Target Export for L2VPN BGP auto-discovery (8 bytes long)
OCT cerL2vpnCmBgpRtImport	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.24	OCTET STRING	read-only	BGP Route Target Import for L2VPN BGP auto-discovery (8 bytes long)
U32 cerL2vpnCmBgpVpnId	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.22	Unsigned32	read-only	This is the BGP VPN ID for L2VPN with BGP auto-discovery and LDP signaling (4byte long non-zero).
T/F cerL2vpnCmCompliantCapability	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.10	TruthValue	read-only	Whether an L2VPN CM is compliant with DOCSIS specification. Refer docsL2vpnCmCompliantCapability.
DOC cerL2vpnCmDhcpSnooping	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.13	DocsL2vpnIfList	read-only	Reports the value of the Enable DHCP Snooping subtype of a top-level L2VPN Encoding.
DOC cerL2vpnCmDutCMIM	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.12	DocsL2vpnIfList	read-only	Reports the value in a per-CM L2VPN Encoding for DUT Cable Modem Interface Mask(CMIM).
T/F cerL2vpnCmDutFilteringCapability	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.11	TruthValue	read-only	Whether an L2VPN forwarding CM is capable of Downstream Unencrypted Traffic(DUT) Filtering. Refer docsL2vpnCmDutFilteringCapability.
T/F cerL2vpnCmForwardingEnabled	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.5	TruthValue	read-only	L2VPN forwarding state for all L2VPN instances hosted by this CM and VLAN instance.
MAC cerL2vpnCmMac	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.1	MacAddress	not-accessible	The CM MAC address hosting this this L2VPN Instance.
IP cerL2vpnCmMplsPeerAddr	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.21	InetAddress	read-only	This is the IP address of the MPLS Peer. IPv4 and IPv6 addresses are supported.
IPt cerL2vpnCmMplsPeerAddrType	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.20	InetAddressType	read-only	This is the MPLS Peer Address Type. Only IPv4(1) or IPv6(2) will be supported. unknown(0) ipv4(1) ipv6(2) ipv4z(3) ipv6z(4) dns(16)
IP cerL2vpnCmMplsPeerIpAddress	1.3.6.1.4.1.4998.1.1.120.1.1.12.1.2	InetAddress	read-only	This is the IP address of the MPLS Peer. IPv4 and IPv6 addresses are supported.
U32 cerL2vpnCmMplsPwId	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.19	Unsigned32	read-only	This is the MPLS PW ID (4byte long non-zero).
DOC cerL2vpnCmNsiEncapSubtype	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.3	DocsNsiEncapSubtype	read-only	The General Encapsulation Information (GEI) subtype of the Network System Interface (NSI) encapsulation configured for the CM.
CAD cerL2vpnCmNsiEncapValue	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.17	CadNsiEncapValue	read-only	The encapsulation value for L2VPN forwarded packets on NSI ports.
C32 cerL2vpnCmStatsDownstreamBytes	1.3.6.1.4.1.4998.1.1.120.1.1.11.1.5	Counter32	read-only	The number of L2-forwarded bytes transmitted to this instance's Cable Modem on this instance's VPN.
C32 cerL2vpnCmStatsDownstreamDiscards	1.3.6.1.4.1.4998.1.1.120.1.1.11.1.6	Counter32	read-only	The number of L2-forwarded packets that were discarded before they could be transmitted to this instance's Cable Modem on this instance's VPN.
C32 cerL2vpnCmStatsDownstreamPkts	1.3.6.1.4.1.4998.1.1.120.1.1.11.1.4	Counter32	read-only	The number of L2-forwarded packets transmitted to this instance's Cable Modem on this instance's VPN.
cerL2vpnCmStatsEntry	1.3.6.1.4.1.4998.1.1.120.1.1.11.1		not-accessible	An entry is indexed by Cable Modem MAC address and VPN ID.
cerL2vpnCmStatsTable	1.3.6.1.4.1.4998.1.1.120.1.1.11		not-accessible	This table is used to populate data to docsL2vpnCmStatusEntry.
C32 cerL2vpnCmStatsUpstreamBytes	1.3.6.1.4.1.4998.1.1.120.1.1.11.1.2	Counter32	read-only	The number of L2vpn-forwarded bytes received from this instance's Cable Modem on this instance's L2VPN.
C32 cerL2vpnCmStatsUpstreamDiscards	1.3.6.1.4.1.4998.1.1.120.1.1.11.1.3	Counter32	read-only	The number of L2-forwarded packets discarded from this instance's Cable Modem on this instance's VPN.
C32 cerL2vpnCmStatsUpstreamPktsEx	1.3.6.1.4.1.4998.1.1.120.1.1.11.1.1	Counter32	read-only	The number of L2vpn-forwarded packets received from this instance's Cable Modem on this instance's L2VPN.
OID cerL2vpnCmVpnId	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.2	DocsL2vpnIdentifier	read-only	An externally configured octet string that identifies an L2VPN.
cerL2vpnCmVpnIdEntry	1.3.6.1.4.1.4998.1.1.120.1.1.10.1		not-accessible	An entry is indexed by Cable Modem MAC address and L2VPN VPN ID.
cerL2vpnCmVpnIdTable	1.3.6.1.4.1.4998.1.1.120.1.1.10		not-accessible	The L2VPN CM table.
DOC cerL2vpnIdx	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.4	DocsL2vpnIndex	read-only	An internally assigned index value for a known VLAD ID. Refer docsL2vpnIdx.
I32 cerL2vpnInstanceId	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.6	Integer32	not-accessible	The 24-bit L2VPN instance identifier composed from 2 12-bit VLANids assigned to the L2VPN instance.
I32 cerL2vpnInstanceInnerVlanId	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.8	Integer32	read-only	L2VPN Instance inner VLAN id.
INT cerL2vpnInstanceNsiEncapSubType	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.9	INTEGER	read-only	NSI Encapsulation subtype.
I32 cerL2vpnInstanceOuterVlanId	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.7	Integer32	read-only	L2VPN Instance outer VLAN id.
U32 cerL2vpnMplsAcId	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.18	Unsigned32	read-only	The 20 bit value of the MPLS AC ID. Assigned by the the UCAM. Has to be unique within a CMTS chassis.
DOC cerL2vpnVpnCmCMIM	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.14	DocsL2vpnIfList	read-only	A Cable Modem Interface Mask represents a set of MAC bridge interfaces within the CM.
I32 cerL2vpnVpnCmIndividualSAID	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.15	Integer32	read-only	The BPI+ Security Association ID in which traffic intended for point-to-point forwarding through an individual CM is forwarded. If the CMTS does not allocate an individual SAID for multipoint forwarding (as is recommended),it MUST report this object as zero.
OCT cerL2vpnVpnCmVendorSpecific	1.3.6.1.4.1.4998.1.1.120.1.1.10.1.16	OCTET STRING	read-only	This object encodes the concatenation of all Vendor Specific Subtype encodings that appeared in any registration per-CM L2VPN Encoding associated with this entry.

RFC description

L2VPN management for Cadant CMTS devices with service flow configuration and VLAN encapsulation.

Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CADANT-L2VPN-MIB