CADANT-IPDR-MIB

All MIBs › CADANT-IPDR-MIB

Organization: Arris International, Inc.

Last Updated: 2015-06-25

Category: DOCSIS and Cable, Vendor: ARRIS

Description: Manages IP Detail Record (IPDR) data collection and export for subscriber usage reporting on ARRIS/Cadant CMTS.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CADANT-IPDR-MIB?

CADANT-IPDR-MIB is an ARRIS (Cadant) private MIB for the C4 CMTS covering IP Detail Record (IPDR) export, the DOCSIS-standard mechanism cable operators use to collect and export subscriber usage/billing data. It exposes configuration objects for enabling IPDR export, setting query and streaming ports, tuning the data-acknowledgment window/timeout and keep-alive interval, and defining the collector(s) that receive exported records, along with what data types are included. This is primarily a software/protocol-configuration monitoring module -- an operator checks it to confirm IPDR export is enabled and correctly pointed at the right collector, since a misconfigured or failed IPDR session means usage/billing data is not being collected, a business-critical rather than hardware issue. It aligns with the CableLabs IPDR/SP (Streaming Protocol) specification used across DOCSIS CMTS platforms rather than a specific IETF MIB. It is typically deployed by cable operators running Cadant C4 CMTS platforms that need to export subscriber usage data to an IPDR collector for billing/reporting systems. Engineers can download the CADANT-IPDR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CADANT-IPDR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ARRIS/Cadant C4 CMTS

Monitoring Examples

An operator would check cadIpdrExportEnabled and cadIpdrExportMode to confirm IPDR export is active and in the expected mode, then verify cadIpdrCollectorTable/cadIpdrCollectorEntry lists the correct collector destination(s). Monitoring cadIpdrDataAckTimeout and cadIpdrKeepAliveInterval against the actual session behavior can reveal a collector connection that is timing out or dropping, while cadIpdrSessionId helps correlate a specific export session across restarts. If cadIpdrExportEnabled shows enabled but no session ID is present, that would indicate the CMTS is failing to establish its IPDR export connection to the collector.

What Can Be Monitored

IPDR export enabled status
query/streaming port numbers
data ack window/timeout
keep-alive interval
IPDR collector configuration
session ID/export mode

Imported Objects

From CADANT-PRODUCTS-MIB

cadExperimental

OBJECT-IDENTITY

From CADANT-TC

InetAddressIPv4or6

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv4
InetAddressType
InetPortNumber

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cadIpdrCollectorOutIntRecs OID:

Select an ARRIS/Cadant C4/E6000 CMT (cable modem termination system) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cadIpdrCollectorOutIntRecs into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of interim data records exported to this collector. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
cadIpdrBasicGroup	1.3.6.1.4.1.4998.1.1.100.30.2.2.1
T/F cadIpdrCollectorActive	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.5	TruthValue	read-only	True if this collector is connected to the exporter. Applicable to DOCSIS 2.0 mode.
cadIpdrCollectorEntry	1.3.6.1.4.1.4998.1.1.100.30.1.11.1		not-accessible
cadIpdrCollectorGroup	1.3.6.1.4.1.4998.1.1.100.30.2.2.2
ADR cadIpdrCollectorIpAddress	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.3	InetAddressIPv4or6	not-accessible	Source IP address of a collector that will be permitted to connect to the exporter. Applicable to DOCSIS 2.0 mode.
IPt cadIpdrCollectorIpAddrType	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.2	InetAddressType	read-only	The type of internet address (IPv4 or IPv6). The only internet address type currently allowed is IPv4. Applicable to DOCSIS 2.0 mode.
C64 cadIpdrCollectorOutIntRecsEx	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.7	Counter64	read-only	Number of interim data records exported to this collector. Applicable to DOCSIS 2.0 mode.
C64 cadIpdrCollectorOutStpRecs	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.8	Counter64	read-only	Number of stop data records exported to this collector. Applicable to DOCSIS 2.0 mode.
INE cadIpdrCollectorPort	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.4	InetPortNumber	read-only	Destination port of collector if exporter trys to connect to the collector. Default is 4747. This object is currently disabled. Applicable to DOCSIS 2.0 mode.
T/F cadIpdrCollectorPrimary	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.6	TruthValue	read-only	True if this collector is the primary collector. Applicable to DOCSIS 2.0 mode.
INT cadIpdrCollectorPriority	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.1	INTEGER	not-accessible	The collector priority. Lower values indicate higher priority. The default priority is 1. Applicable to DOCSIS 2.0 mode.
ROW cadIpdrCollectorStatus	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.10	RowStatus	read-create	Row control for this collector. The only valid values for this object are createAndGo, destroy, and active. Applicable to DOCSIS 2.0 mode.
C64 cadIpdrCollectorSupIntRecs	1.3.6.1.4.1.4998.1.1.100.30.1.11.1.9	Counter64	read-only	Number of interim data records suppressed for this collector. Applicable to DOCSIS 2.0 mode.
cadIpdrCollectorTable	1.3.6.1.4.1.4998.1.1.100.30.1.11		not-accessible	A priority ordered list of collectors that will be allowed to connect to the exporter. The highest priority active collector is designated the primary collector. This list is exclusive and any collector not in this list will be ignored. Applicable to DOCSIS 2.0 mode.
U32 cadIpdrCountsAdhocIndex	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.6	Unsigned32	not-accessible	The counts adhoc index.
ADR cadIpdrCountsCollectorIpAddress	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.3	InetAddressIPv4or6	not-accessible	The counts source IP address of a collector that will be permitted to connect to the exporter.
INT cadIpdrCountsCollectorPriority	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.2	INTEGER	not-accessible	The counts collector priority. Lower values indicate higher priority. The default priority is 1.
cadIpdrCountsEntry	1.3.6.1.4.1.4998.1.1.100.30.1.15.1		not-accessible
C64 cadIpdrCountsEventRecs	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.13	Counter64	read-only	Number of event data records exported for this session-id to this collector.
cadIpdrCountsGroup	1.3.6.1.4.1.4998.1.1.100.30.2.2.6
C64 cadIpdrCountsIntRecs	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.9	Counter64	read-only	Number of interim data records exported for this session-id to this collector.
INT cadIpdrCountsSessionId	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.1	INTEGER	not-accessible	The counts session-id used in the header of IPDR protocol messages. The default is 1.
INT cadIpdrCountsStartHH	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.4	INTEGER	not-accessible	The counts report cycle start hour. The default is 00.
INT cadIpdrCountsStartMM	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.5	INTEGER	not-accessible	The counts report cycle start minutes after the hour. Default is 00.
C64 cadIpdrCountsStartRecs	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.11	Counter64	read-only	Number of start data records exported for this session-id to this collector.
OCT cadIpdrCountsStartTime	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.7	OCTET STRING	read-create	The counts report cycle start time. Default is 0 length.
ROW cadIpdrCountsStatus	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.14	RowStatus	read-create	Row control for this counts entry. The only valid values for this object are createAndGo, destroy, and active.
C64 cadIpdrCountsStopRecs	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.12	Counter64	read-only	Number of stop data records exported for this session-id to this collector.
OCT cadIpdrCountsStopTime	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.8	OCTET STRING	read-create	The counts report cycle stop time. Default is 0 length.
C64 cadIpdrCountsSupIntRecs	1.3.6.1.4.1.4998.1.1.100.30.1.15.1.10	Counter64	read-only	Number of interim data records suppressed for this session-id to this collector.
cadIpdrCountsTable	1.3.6.1.4.1.4998.1.1.100.30.1.15		not-accessible	A session-id/priority/collector ordered list of counts for all sessions. Applicable to DOCSIS 2.0 and 3.0 modes.
INT cadIpdrDataAckTimeout	1.3.6.1.4.1.4998.1.1.100.30.1.5	INTEGER	read-write	Maximum elapsed time before a DATA message must be acknowledged by the collector. Applicable to DOCSIS 2.0 mode.
INT cadIpdrDataAckWindow	1.3.6.1.4.1.4998.1.1.100.30.1.4	INTEGER	read-write	Maximum number of unacknowledged IPDR/SP messages that may be outstanding to the collector. Applicable to DOCSIS 2.0 mode.
T/F cadIpdrExportAllCounts	1.3.6.1.4.1.4998.1.1.100.30.1.7	TruthValue	read-write	Export all counts if true, and supress duplicate counts if false. The default is false. Applicable to DOCSIS 2.0 mode.
T/F cadIpdrExportCpeInfo	1.3.6.1.4.1.4998.1.1.100.30.1.8	TruthValue	read-write	Export information about CPEs behind CMs (CmCpeInfoList) if set to true. If false, supress information about CPEs. The default is false. Applicable to DOCSIS 2.0 mode.
T/F cadIpdrExportEnabled	1.3.6.1.4.1.4998.1.1.100.30.1.1	TruthValue	read-write	IPDR streams is enabled or disabled. When enabled the cadIpdrQueryPort and cadIpdrStreamingPort will be open to listen for collector connections. When disabled, all ports will be closed.
INT cadIpdrExportMode	1.3.6.1.4.1.4998.1.1.100.30.1.10	INTEGER	read-write	DOCSIS mode exporter, either DOCSIS 2.0 or DOCSIS 3.0. The default is DOCSIS 2.0 mode, or 1.
INT cadIpdrKeepAliveInterval	1.3.6.1.4.1.4998.1.1.100.30.1.6	INTEGER	read-write	Maximum duration of protocol silence before a KEEPALIVE message must be sent.
cadIpdrMib	1.3.6.1.4.1.4998.1.1.100.30			This MIB modules contains the definitions to support configuration and status for C4 IPDR implementation.
cadIpdrMIBCompliance	1.3.6.1.4.1.4998.1.1.100.30.2.1.1			The compliance statement for the Arris IPDR implementation.
cadIpdrMIBCompliances	1.3.6.1.4.1.4998.1.1.100.30.2.1
cadIpdrMIBConformance	1.3.6.1.4.1.4998.1.1.100.30.2
cadIpdrMIBGroups	1.3.6.1.4.1.4998.1.1.100.30.2.2
cadIpdrMIBObjects	1.3.6.1.4.1.4998.1.1.100.30.1
INT cadIpdrQueryPort	1.3.6.1.4.1.4998.1.1.100.30.1.2	INTEGER	read-write	UDP port used to listen for collector queries.
cadIpdrReportCycleEntry	1.3.6.1.4.1.4998.1.1.100.30.1.12.1		not-accessible
cadIpdrReportCycleSetEntry	1.3.6.1.4.1.4998.1.1.100.30.1.14.1		not-accessible
cadIpdrReportCycleSetGroup	1.3.6.1.4.1.4998.1.1.100.30.2.2.5
INT cadIpdrReportCycleSetInterval	1.3.6.1.4.1.4998.1.1.100.30.1.14.1.4	INTEGER	read-create	The report cycle set interval duration in minutes. The default is 60 minutes.
INT cadIpdrReportCycleSetSet	1.3.6.1.4.1.4998.1.1.100.30.1.14.1.1	INTEGER	not-accessible	The report cycle set id number. The default is 1.
INT cadIpdrReportCycleSetStartHH	1.3.6.1.4.1.4998.1.1.100.30.1.14.1.2	INTEGER	not-accessible	The report cycle set start hour. The default is 00.
INT cadIpdrReportCycleSetStartMM	1.3.6.1.4.1.4998.1.1.100.30.1.14.1.3	INTEGER	not-accessible	The report cycle set start minutes after the hour. Default is 00.
ROW cadIpdrReportCycleSetStatus	1.3.6.1.4.1.4998.1.1.100.30.1.14.1.5	RowStatus	read-create	Row control for this report cycle set entry. The only valid values for this object are createAndGo, destroy, and active.
cadIpdrReportCycleSetTable	1.3.6.1.4.1.4998.1.1.100.30.1.14		not-accessible	A list of sets of scheduled report cycle start times and interval durations. Multiple entries indicate blocks of time with variable interval durations. Applicable to DOCSIS 3.0 mode.
cadIpdrReportCycleTable	1.3.6.1.4.1.4998.1.1.100.30.1.12		not-accessible	A list of scheduled report cycle start times and interval durations. Multiple entries indicate blocks of time with variable interval durations. Applicable to DOCSIS 2.0 mode.
cadIpdrReportGroup	1.3.6.1.4.1.4998.1.1.100.30.2.2.3
INT cadIpdrReportInterval	1.3.6.1.4.1.4998.1.1.100.30.1.12.1.3	INTEGER	read-create	The report cycle interval duration in minutes. The default is 60 minutes. Applicable to DOCSIS 2.0 mode.
C64 cadIpdrReportOutIntRecs	1.3.6.1.4.1.4998.1.1.100.30.1.12.1.4	Counter64	read-only	Number of interim data records exported during this report cycle. Applicable to DOCSIS 2.0 mode.
C64 cadIpdrReportOutStpRecs	1.3.6.1.4.1.4998.1.1.100.30.1.12.1.5	Counter64	read-only	Number of stop data records exported during this report cycle. Applicable to DOCSIS 2.0 mode.
INT cadIpdrReportStartHH	1.3.6.1.4.1.4998.1.1.100.30.1.12.1.1	INTEGER	not-accessible	The report cycle start hour. The default is 00. Applicable to DOCSIS 2.0 mode.
INT cadIpdrReportStartMM	1.3.6.1.4.1.4998.1.1.100.30.1.12.1.2	INTEGER	not-accessible	The report cycle start minutes after the hour. Default is 00. Applicable to DOCSIS 2.0 mode.
ROW cadIpdrReportStatus	1.3.6.1.4.1.4998.1.1.100.30.1.12.1.7	RowStatus	read-create	Row control for this report cycle. The only valid values for this object are createAndGo, destroy, and active. Applicable to DOCSIS 2.0 mode.
C64 cadIpdrReportSupIntRecs	1.3.6.1.4.1.4998.1.1.100.30.1.12.1.6	Counter64	read-only	Number of interim data records suppressed during this report cycle. Applicable to DOCSIS 2.0 mode.
T/F cadIpdrServiceAllCounts	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.9	TruthValue	read-create	Export all counts if true, and supress duplicate counts if false. The default is false.
INT cadIpdrServiceDataAckTimeout	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.6	INTEGER	read-create	The session maximum elapsed time before a DATA message must be acknowledged by the collector.
INT cadIpdrServiceDataAckWindow	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.5	INTEGER	read-create	The session maximum number of unacknowledged IPDR/SP messages that may be outstanding to the collector.
cadIpdrServiceEntry	1.3.6.1.4.1.4998.1.1.100.30.1.13.1		not-accessible
INT cadIpdrServiceEvtPaceGap	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.8	INTEGER	read-create	The session event pace gap.
cadIpdrServiceGroup	1.3.6.1.4.1.4998.1.1.100.30.2.2.4
INT cadIpdrServiceMethod	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.3	INTEGER	read-create	The session service method (unknown, time, event, adhoc). The default is time.
INT cadIpdrServicePriority	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.4	INTEGER	read-create	The session priority. Lower values indicate higher priority. This object is not used.
INT cadIpdrServiceReportCycleSet	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.7	INTEGER	read-create	The session report cycle set.
INT cadIpdrServiceSessionId	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.1	INTEGER	not-accessible	The session-id used in the header of IPDR protocol messages. The default is 1.
ROW cadIpdrServiceStatus	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.10	RowStatus	read-create	Row control for this service. The only valid values for this object are createAndGo, destroy, and active.
cadIpdrServiceTable	1.3.6.1.4.1.4998.1.1.100.30.1.13		not-accessible	A session-id ordered list of services that will be allowed to be requested by the Collector. This list is exclusive and are used when the exporter is in DOCSIS 3.0 mode.
INT cadIpdrServiceType	1.3.6.1.4.1.4998.1.1.100.30.1.13.1.2	INTEGER	read-create	The session service types are unknown(0), samis_1(1), samis_2(2), cpe(3), cm_reg(4), cm_us(5), spect(6), diag(7), topo(8), us_util(9), ds_util(10), diag_evt(11), diag_det(12), cm_sf(13), cpe_a2(14), mcast(15). The default is 1.
T/F cadIpdrSessionCollectorActive	1.3.6.1.4.1.4998.1.1.100.30.1.16.1.6	TruthValue	read-only	True if this collector is connected to the exporter for this session.
cadIpdrSessionCollectorEntry	1.3.6.1.4.1.4998.1.1.100.30.1.16.1		not-accessible
cadIpdrSessionCollectorGroup	1.3.6.1.4.1.4998.1.1.100.30.2.2.7
ADR cadIpdrSessionCollectorIpAddress	1.3.6.1.4.1.4998.1.1.100.30.1.16.1.4	InetAddressIPv4or6	not-accessible	Source IP address of a collector that will be permitted to connect to the exporter.
IPt cadIpdrSessionCollectorIpAddrType	1.3.6.1.4.1.4998.1.1.100.30.1.16.1.3	InetAddressType	read-only	The type of internet address (IPv4 or IPv6). The only internet address type currently allowed is IPv4.
INE cadIpdrSessionCollectorPort	1.3.6.1.4.1.4998.1.1.100.30.1.16.1.5	InetPortNumber	read-only	Destination port of collector if exporter trys to connect to the collector. Default is 4747. This object is currently disabled.
T/F cadIpdrSessionCollectorPrimary	1.3.6.1.4.1.4998.1.1.100.30.1.16.1.7	TruthValue	read-only	True if this collector is the primary collector for this session.
INT cadIpdrSessionCollectorPriority	1.3.6.1.4.1.4998.1.1.100.30.1.16.1.2	INTEGER	not-accessible	The collector priority. Lower values indicate higher priority. The default priority is 1.
INT cadIpdrSessionCollectorSessionId	1.3.6.1.4.1.4998.1.1.100.30.1.16.1.1	INTEGER	not-accessible	The counts session-id used in the header of IPDR protocol messages. The default is 1.
ROW cadIpdrSessionCollectorStatus	1.3.6.1.4.1.4998.1.1.100.30.1.16.1.8	RowStatus	read-create	Row control for this collector. The only valid values for this object are createAndGo, destroy, and active.
cadIpdrSessionCollectorTable	1.3.6.1.4.1.4998.1.1.100.30.1.16		not-accessible	A session and priority ordered list of collectors that is used to track the Active and Primary status of the collector relative to this session. Applicable to DOCSIS 3.0 mode.
INT cadIpdrSessionId	1.3.6.1.4.1.4998.1.1.100.30.1.9	INTEGER	read-write	session-id used in the header of IPDR protocol messages. The default is 1. Applicable to DOCSIS 2.0 mode.
INT cadIpdrStreamingPort	1.3.6.1.4.1.4998.1.1.100.30.1.3	INTEGER	read-write	TCP port used to listen for collector connections.

RFC description

Supports configuration and status for C4 IPDR (IP Detail Record) implementation in cable modems, tracking session collector status and service definitions.

Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CADANT-IPDR-MIB