BIANCA-X4000-MIBSYS-MIB

All MIBs › BIANCA-X4000-MIBSYS-MIB

Category: Textual Conventions and Registries, Vendor: bintec

Description: Supplies system management objects for the bintec elmeg BIANCA X4000 series of broadband router devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BIANCA-X4000-MIBSYS-MIB?

BIANCA-X4000-MIBSYS-MIB is a private enterprise MIB providing system-level management objects for the bintec elmeg (formerly BinTec/BIANCA) X4000 series broadband router devices. As a system MIB in this vendor family, it typically covers core device identification, system uptime, and general status/configuration parameters for the router platform, though no specific object names are available in this source excerpt to confirm exact coverage. Given the naming convention shared with other bintec/BIANCA system MIBs, it would be expected to support monitoring of basic device software/hardware status such as system uptime and configuration state on the router. It relies on the vendor's broader BIANCA/BinTec enterprise MIB tree rather than a standard IETF module. It is deployed in small-to-midsize business or branch-office settings where BIANCA/bintec X4000 broadband routers provide WAN connectivity. Engineers can download the BIANCA-X4000-MIBSYS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-X4000-MIBSYS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

bintec elmeg (BIANCA) X4000 series broadband routers

Monitoring Examples

No sample objects were provided for this module, so specific object/table names cannot be grounded here; based on the module's role as a system MIB for the X4000 platform, it would typically expose system identification and status scalars rather than complex tables, but a concrete polling scenario cannot be responsibly invented without real object names.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

sysDescr
sysName

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
org	1.3
dod	1.3.6
internet	1.3.6.1
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
bintec	1.3.6.1.4.1.272
bibo	1.3.6.1.4.1.272.4
sys	1.3.6.1.4.1.272.4.17
x4	1.3.6.1.4.1.272.4.17.2
sysX4Config	1.3.6.1.4.1.272.4.17.2.1
INT sysX4ConfigLcdBrightness	1.3.6.1.4.1.272.4.17.2.1.1	INTEGER	read-write	This variable allows to control the brightness of the LCD display. Lower values mean less, higher values mean more brightness. Zero means no brightness.
INT sysX4ConfigLcdContrast	1.3.6.1.4.1.272.4.17.2.1.2	INTEGER	read-write	This variable allows to control the contrast of the LCD display. Lower values mean less, higher values mean more contrast. Zero means factory settings.
INT sysX4ConfigLcdConfigure	1.3.6.1.4.1.272.4.17.2.1.3	INTEGER	read-write	This variable determines whether it is possible to configure the brick by using the LCD display and the buttons.
STR sysX4ConfigLcdPin	1.3.6.1.4.1.272.4.17.2.1.4	DisplayString	read-write	The PIN is the personal identification number that is needed for authorisation for display configurations. It consists solely of digits and must be 4 characters long. Default Value is '0000'.
INT sysX4ConfigLcdIdleTimer	1.3.6.1.4.1.272.4.17.2.1.5	INTEGER	read-write	After this time the display screen changes to default screen. Default Value is 5. If this value is set to 0, change to defaultscreen is disabled
STR sysX4ConfigLcdDefaultScreen	1.3.6.1.4.1.272.4.17.2.1.6	DisplayString	read-write	This screen will be displayed after the LcdIdleTimer has elapsed. Default Value is MainMenu.
STR sysX4ConfigLcdLanguage	1.3.6.1.4.1.272.4.17.2.1.7	DisplayString	read-write	Choose your display language.
INT sysX4ConfigTempUnit	1.3.6.1.4.1.272.4.17.2.1.8	INTEGER	read-only	This variable defines the unit of sysX4Config*Temp, either Celsius or Fahrenheit.
INT sysX4ConfigMainTemp	1.3.6.1.4.1.272.4.17.2.1.9	INTEGER	read-only	This variable shows the actual main board temperature measured in the units Fahrenheit or Celsius.
INT sysX4ConfigMainTempAlarmThreshold	1.3.6.1.4.1.272.4.17.2.1.10	INTEGER	read-write	system mainboard temperature threshold.
INT sysX4ConfigMainTempAlarmTrap	1.3.6.1.4.1.272.4.17.2.1.11	INTEGER	read-only	If the system temperature raises above the threshold, a alarm trap is generated every 60 seconds.
INT sysX4ConfigMod1Temp	1.3.6.1.4.1.272.4.17.2.1.12	INTEGER	read-only	This variable shows the actual module sensor1 temperature in the units Fahrenheit or Celsius.
INT sysX4ConfigMod1TempAlarmThreshold	1.3.6.1.4.1.272.4.17.2.1.13	INTEGER	read-write	actual module sensor1 temperature threshold.
INT sysX4ConfigMod1TempAlarmTrap	1.3.6.1.4.1.272.4.17.2.1.14	INTEGER	read-only	If the actual module sensor1 temperature raises above the threshold, a alarm trap is generated every 60 seconds.
INT sysX4ConfigMod2Temp	1.3.6.1.4.1.272.4.17.2.1.15	INTEGER	read-only	This variable shows the actual module sensor2 temperature in the units Fahrenheit or Celsius.
INT sysX4ConfigMod2TempAlarmThreshold	1.3.6.1.4.1.272.4.17.2.1.16	INTEGER	read-write	actual module sensor2 temperature threshold.
INT sysX4ConfigMod2TempAlarmTrap	1.3.6.1.4.1.272.4.17.2.1.17	INTEGER	read-only	If the actual module sensor2 temperature raises above the threshold, a alarm trap is generated every 60 seconds.
sysX4Traps	1.3.6.1.4.1.272.4.17.2.2
NTF sysX4TrapMainTempCritical	1.3.6.1.4.1.272.4.17.2.2.0.1			This trap signifies that the system board temperature raises above the critical alarm-threshold
NTF sysX4TrapMainTempOk	1.3.6.1.4.1.272.4.17.2.2.0.2			Normal system board temperature has been restored.
NTF sysX4TrapMod1TempCritical	1.3.6.1.4.1.272.4.17.2.2.0.3			This trap signifies that the actual module (sensor 1) temperature raises above the critical alarm-threshold
NTF sysX4TrapMod1Temp1Ok	1.3.6.1.4.1.272.4.17.2.2.0.4			Normal temperature of actual module (sensor 1) has been restored.
NTF sysX4TrapMod2TempCritical	1.3.6.1.4.1.272.4.17.2.2.0.5			This trap signifies that the actual module (sensor 2) temperature raises above the critical alarm-threshold
NTF sysX4TrapMod2TempOk	1.3.6.1.4.1.272.4.17.2.2.0.6			Normal temperature of actual module (sensor 2) has been restored.

RFC description

Provides system management objects for bintec elmeg BIANCA X4000 series broadband router devices.

Start monitoring bintec elmeg BIANCA X4000-series broadband router (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BIANCA-X4000-MIBSYS-MIB

What Is BIANCA-X4000-MIBSYS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description