All MIBs › BIANCA-BRICK-X25STAT-MIB
Category: SNA and Legacy Protocols, Vendor: bintec
Description: Gathers X.25 protocol statistics, including packet and byte counters, on bintec elmeg BIANCA/BRICK routers.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BIANCA-BRICK-X25STAT-MIB?
BIANCA-BRICK-X25STAT-MIB is a bintec elmeg BIANCA/BRICK enterprise MIB that collects X.25 packet-switched network protocol statistics on the router. It exposes counters for incoming and outgoing X.25 call attempts, successes, failures, and timeouts, plus current and maximum concurrent call/pending-call counts, along with switch-level (x25SwStats), multiplexer (x25MuxStats), and X.25-to-TCP gateway (x25ToTcpStats) statistics. This is a software/protocol performance-monitoring MIB, used to track call setup success rates and detect capacity exhaustion (e.g., hitting max concurrent calls) or a spike in failed/timed-out calls indicating link or configuration problems. No dependency on other standard MIBs is evident from the available material; it appears to be a self-contained vendor extension. It's deployed on bintec elmeg BIANCA/BRICK routers used in legacy X.25 packet-switched network environments, often bridging X.25 to TCP/IP. Engineers can download the BIANCA-BRICK-X25STAT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-BRICK-X25STAT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- bintec elmeg BIANCA/BRICK router with X.25 interface
Monitoring Examples
An operator would poll x25SwIncomingAttempts against x25SwIncomingSucceeded and x25SwIncomingFailed to compute the incoming call success rate, and check x25SwIncCurrentCalls versus x25SwIncMaxConcCalls to see how close the link is to its concurrent-call ceiling. A rising x25SwIncFailedTimeout counter would indicate calls are timing out rather than being actively rejected, pointing to a downstream reachability issue. The x25ToTcpStats object would be checked when the router is used as an X.25-to-TCP gateway, to confirm bridged sessions are proceeding normally.
What Can Be Monitored
- X.25 incoming/outgoing call attempts and success/failure counts
- current vs. maximum concurrent calls
- call timeout failures
- X.25 switch/multiplexer statistics
- X.25-to-TCP gateway statistics
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| TimeTicks | |
| enterprises |
From RFC1158-MIB
| DisplayString |
OIDs
RFC description
Collects X.25 protocol statistics including packet and byte counters on bintec elmeg BIANCA/BRICK routers.
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.