All MIBs › BIANCA-BRICK-MIB
Category: Textual Conventions and Registries, Vendor: bintec
Description: Core management MIB for bintec elmeg BIANCA/BRICK broadband routers covering system-level objects and device identification.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BIANCA-BRICK-MIB?
BIANCA-BRICK-MIB is the core management MIB for bintec elmeg's BIANCA/BRICK family of broadband/ISDN routers (originally BinTec's BIANCA/BRICK line), covering system-level objects and device identification for these access routers. It provides the foundational system identity and status objects (such as model/type identification and basic system state) that other BIANCA/BRICK-specific MIB modules in the same product family build on. As a core system MIB it is oriented toward software/system-status monitoring, i.e., confirming the device's identity, running configuration state, and basic operational status, though without module-level detail provided here it's unclear whether it extends to environmental sensors. It serves as the root/dependency MIB that companion BIANCA/BRICK MIBs (covering interfaces, ISDN, routing, etc.) are typically built upon. It is deployed on bintec elmeg / BinTec BIANCA/BRICK routers used for small-business and branch-office ISDN/broadband WAN connectivity. Network engineers evaluating or troubleshooting this functionality can download the BIANCA-BRICK-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-BRICK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- bintec elmeg / BinTec BIANCA/BRICK router
Monitoring Examples
Because sample_objects is empty for this entry, exact object names cannot be confirmed, but based on its role as the core BIANCA/BRICK MIB, an administrator would typically poll its system identification and basic status objects to confirm device model/type and overall operational state before drilling into companion BIANCA/BRICK MIBs for interface- or protocol-specific detail.
What Can Be Monitored
- device model/type identification
- basic system operational status
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks |
From RFC1213-MIB
| sysDescr | |
| sysName |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| admin | 1.3.6.1.4.1.272.4.1 | |||
| admin_2 | 1.3.6.1.4.1.272.4.22 | |||
| bibo | 1.3.6.1.4.1.272.4 | |||
| INT biboABrdConnector | 1.3.6.1.4.1.272.4.1.17.1.6 | INTEGER | read-write | The type of connector used for this module. For modules with more than one connector this value can be changed/switched by setting this object. For example, the CM-BNCTP module supports both twisted pair (RJ45) and 10Base2 (BNC) connectors. If this object is set to 'AUTO' then the BRICK will automatically detect which connector type is being used. |
| STR biboABrdFWRelease | 1.3.6.1.4.1.272.4.1.17.1.4 | DisplayString | read-only | The firmware release of this module. |
| STR biboABrdHWRelease | 1.3.6.1.4.1.272.4.1.17.1.3 | DisplayString | read-only | The hardware release of this module. |
| STR biboABrdPartNo | 1.3.6.1.4.1.272.4.1.17.1.5 | DisplayString | read-only | The part number of this module. |
| STR biboABrdSerialNo | 1.3.6.1.4.1.272.4.1.17.1.8 | DisplayString | read-only | The serial number of this module. |
| INT biboABrdSlot | 1.3.6.1.4.1.272.4.1.17.1.1 | INTEGER | read-only | The slot, or location of this module. |
| STR biboABrdType | 1.3.6.1.4.1.272.4.1.17.1.2 | DisplayString | read-only | The name of this module. |
| INT biboABrdUnit | 1.3.6.1.4.1.272.4.1.17.1.7 | INTEGER | read-only | The logical unit number of this interface. |
| STR biboACrdCpldVersion | 1.3.6.1.4.1.272.4.1.42.1.4 | DisplayString | read-only | Version of onboard CPLD. |
| STR biboACrdFpgaVersion | 1.3.6.1.4.1.272.4.1.42.1.5 | DisplayString | read-only | Version of loaded FPGA firmware. |
| INT biboACrdSlot | 1.3.6.1.4.1.272.4.1.42.1.1 | INTEGER | read-only | The slot, or location of this card. |
| INT biboACrdState | 1.3.6.1.4.1.272.4.1.42.1.3 | INTEGER | read-write | State of the card. |
| INT biboACrdTemp | 1.3.6.1.4.1.272.4.1.42.1.6 | INTEGER | read-only | This variable shows the actual card temperature in the unit Celsius. |
| INT biboACrdTempAlarmThreshold | 1.3.6.1.4.1.272.4.1.42.1.7 | INTEGER | read-write | Card temperature threshold. |
| INT biboACrdTempAlarmTrap | 1.3.6.1.4.1.272.4.1.42.1.8 | INTEGER | read-only | If the card temperature raises above the threshold, a trap is generated every 60 seconds. |
| STR biboACrdType | 1.3.6.1.4.1.272.4.1.42.1.2 | DisplayString | read-only | The name of this card. |
| biboAdmBoardEntry | 1.3.6.1.4.1.272.4.1.17.1 | not-accessible | ||
| biboAdmBoardTable | 1.3.6.1.4.1.272.4.1.17 | not-accessible | The biboAdmBoardTable lists information about the installed communications modules. This table is updated after every system boot up. Creating entries: Entries are created by the system upon detecting the installed hardware. Deleting entries: Entries are removed by the system as a result of removed hardware. | |
| IP biboAdmBootpRelayServer | 1.3.6.1.4.1.272.4.1.33 | IpAddress | read-write | This object contains the destination IP address to which BOOTP/DHCP request are forwarded by the BIANCA/BRICK BOOTP relay agent. If this entry is empty no BOOTP forwarding is done. |
| INT biboAdmBridgeEnable | 1.3.6.1.4.1.272.4.1.22 | INTEGER | read-write | Sets bridging to enable / disable status. |
| INT biboAdmCapiTcpPort | 1.3.6.1.4.1.272.4.1.23 | INTEGER | read-write | TCP port for remote CAPI demon. |
| biboAdmCardEntry | 1.3.6.1.4.1.272.4.1.42.1 | not-accessible | ||
| biboAdmCardTable | 1.3.6.1.4.1.272.4.1.42 | not-accessible | The biboAdmCardTable lists installed cards. | |
| INT biboAdmConfigCmd | 1.3.6.1.4.1.272.4.1.14.1.1 | INTEGER | read-write | Command for configuration handling. Possible values are : save(1) = save configuration (to FLASH) load(2) = load configuration (from FLASH) put(3) = write configuration (via TFTP) get(4) = read configuration (via TFTP) state(5) = write complete configuration (via TFTP) delete(6) = delete configuration (within FLASH) move(7) = move configuration (within FLASH) copy(8) = copy configuration (within FLASH) reboot(9) = reboot the system reorg(10) = reorganizes the flash |
| STR biboAdmConfigDirContent | 1.3.6.1.4.1.272.4.1.15.1.3 | DisplayString | read-only | Description of directory's contents (e.g., or a series of table numbers). |
| INT biboAdmConfigDirCount | 1.3.6.1.4.1.272.4.1.15.1.2 | INTEGER | read-only | Number of tables saved in the file. |
| biboAdmConfigDirEntry | 1.3.6.1.4.1.272.4.1.15.1 | not-accessible | ||
| STR biboAdmConfigDirName | 1.3.6.1.4.1.272.4.1.15.1.1 | DisplayString | read-only | Name of the configuration file in flash memory. |
| biboAdmConfigDirTable | 1.3.6.1.4.1.272.4.1.15 | not-accessible | Configuration directory table. This table contains all available configuration files in flash memory. | |
| biboAdmConfigEntry | 1.3.6.1.4.1.272.4.1.14.1 | not-accessible | ||
| STR biboAdmConfigFile | 1.3.6.1.4.1.272.4.1.14.1.7 | DisplayString | read-write | TFTP filename to read/write from/to the specified host. The configuration file received is stored in flash memory specified by biboAdmConfigPath. The actual configuration is not changed. |
| IP biboAdmConfigHost | 1.3.6.1.4.1.272.4.1.14.1.5 | IpAddress | read-write | TFTP host's IP address to send/receive the file to/from. The configuration is transfered directly from flash memory (biboAdmConfigPath) to TFTP-file (biboAdmConfigFile). |
| OID biboAdmConfigObject | 1.3.6.1.4.1.272.4.1.14.1.2 | OBJECT IDENTIFIER | read-write | Table object id (OID) to save/load. If this field is set, only this table is saved/loaded. Otherwise all tables are saved/loaded. |
| STR biboAdmConfigPath | 1.3.6.1.4.1.272.4.1.14.1.3 | DisplayString | read-write | NAme of the configuration file in flash memory to save/load. |
| STR biboAdmConfigPathNew | 1.3.6.1.4.1.272.4.1.14.1.4 | DisplayString | read-write | New name of configuration file in flash memory to move/copy |
| INT biboAdmConfigState | 1.3.6.1.4.1.272.4.1.14.1.6 | INTEGER | read-only | The state of this command (i.e., biboAdmConfigCmd). todo(1) = The command has not started; running(2) = The command is executing; done(3) = The command successfully completed; error(4) = The command failed (see the biboAdmSyslogTable). |
| biboAdmConfigTable | 1.3.6.1.4.1.272.4.1.14 | not-accessible | The biboAdmConfigTable is used for assigning parameters for managing configuration files. Creating entries: Entries are added to this table by assigning a value to the biboAdmConfigCmd object. (i.e., The intermediate result of executing, cmd=save, creates an entry to this table.). Deleting entries: Entries can only be removed by the system and is done only after the requested action has been performed (i.e. Once the cmd=save action is complete.). | |
| INT biboAdmConsoleSyslog | 1.3.6.1.4.1.272.4.1.29 | INTEGER | read-write | Specifies whether to direct syslog messages to the console. |
| STR biboAdmDomainName | 1.3.6.1.4.1.272.4.1.19 | DisplayString | read-write | Domain name. |
| INT biboAdmHttpTcpPort | 1.3.6.1.4.1.272.4.1.36 | INTEGER | read-write | TCP port for the HTTP server. Default port is 80, 0 disables the HTTP server. |
| IP biboAdmIpAddr | 1.3.6.1.4.1.272.4.1.8 | IpAddress | read-write | Local IP address. If this object is set, it's value will be used as the source address for all IP packets that are sent. Otherwise, the IP address used will be retrieved from the ipRouteTable, for the interface the IP packet is to be transmitted over. |
| biboAdmLicInfoEntry | 1.3.6.1.4.1.272.4.1.32.1 | not-accessible | ||
| STR biboAdmLicInfoHwSerial | 1.3.6.1.4.1.272.4.1.32.1.7 | DisplayString | read-only | The complete serial id string of the special license. |
| STR biboAdmLicInfoId | 1.3.6.1.4.1.272.4.1.32.1.3 | DisplayString | read-only | The complete serial id string of the special license. |
| CTR biboAdmLicInfoInUse | 1.3.6.1.4.1.272.4.1.32.1.6 | Counter | read-only | The current number of chunks in use. |
| CTR biboAdmLicInfoMaxLic | 1.3.6.1.4.1.272.4.1.32.1.5 | Counter | read-only | The max number of allowed chunks. |
| INT biboAdmLicInfoSlot | 1.3.6.1.4.1.272.4.1.32.1.4 | INTEGER | read-only | In case of a hardware license corresponding to a dedicated module serial number, it is the slot number of the module. |
| INT biboAdmLicInfoStatus | 1.3.6.1.4.1.272.4.1.32.1.2 | INTEGER | read-only | The current state of the license. |
| biboAdmLicInfoTable | 1.3.6.1.4.1.272.4.1.32 | not-accessible | This table contains an entry for each feature, that can be activated by a license. The licenses have to be entered in the biboAdmLicenseTable. This tabl indicates the current state of the different licenses. | |
| INT biboAdmLicInfoType | 1.3.6.1.4.1.272.4.1.32.1.1 | INTEGER | read-only | The licenseable feature. |
| INT biboAdmLicInfoUnit | 1.3.6.1.4.1.272.4.1.32.1.8 | INTEGER | read-only | In case of a hardware license corresponding to a dedicated module serial number, it is the unit number of the module. |
| STR biboAdmLocalPPPIdent | 1.3.6.1.4.1.272.4.1.35 | DisplayString | read-write | This is the local ID string used for PPP authentication (PAP/CHAP). In pre4.3 versions the sysName has been used as the local ID string. This is, for increased ease and transparency of system configuration, no longer true. |
| IP biboAdmLogHostAddr | 1.3.6.1.4.1.272.4.1.13.1.1 | IpAddress | read-write | Ip-Address where syslog messages are sent. If the facility is set to memory or console, this field is not used. |
| biboAdmLogHostEntry | 1.3.6.1.4.1.272.4.1.13.1 | not-accessible | ||
| INT biboAdmLogHostFacility | 1.3.6.1.4.1.272.4.1.13.1.4 | INTEGER | read-write | The facility used for the syslog messages being generated. |
| INT biboAdmLogHostLevel | 1.3.6.1.4.1.272.4.1.13.1.2 | INTEGER | read-write | Priorities lower or equal this level are sent to loghost. The delete priority is used to discard the whole entry. |
| biboAdmLogHostTable | 1.3.6.1.4.1.272.4.1.13 | not-accessible | The biboAdmLogHostTable lists hosts which are to receive syslog messages. This table also defines which types and levels of messages to send. Creating entries: Entries are created by setting a IP address to biboAdmLogHostAddr. Deleting entries: Entries are removed by setting the appropriate biboAdmLogHostLevel field to 'delete'. | |
| INT biboAdmLogHostTimestamp | 1.3.6.1.4.1.272.4.1.13.1.6 | INTEGER | read-write | This object describes the format of the timestamp. none(1) = no timestamp, time(2) = only time is printed, all(3) = date and time is printed. |
| INT biboAdmLogHostType | 1.3.6.1.4.1.272.4.1.13.1.5 | INTEGER | read-write | The subject of the messages that are to be generated. system means all subjects except accounting, all means all subjects. |
| IP biboAdmNameServ2 | 1.3.6.1.4.1.272.4.1.21 | IpAddress | read-write | IP address of second name server. |
| IP biboAdmNameServer | 1.3.6.1.4.1.272.4.1.20 | IpAddress | read-write | IP address of name server. |
| IP biboAdmRadiusServer | 1.3.6.1.4.1.272.4.1.34 | IpAddress | read-write | This object contains the IP address of the RADIUS server (remote dial in user service). If set to 0.0.0.0 RADIUS services are generally disabled (default). The corresponding Radius password is configured in the biboAdmRadiusSecret variable. |
| INT biboAdmRipUdpPort | 1.3.6.1.4.1.272.4.1.25 | INTEGER | read-write | UDP port for RIP. Setting this object to zero disables RIP. |
| INT biboAdmSnmpLinkTrapEvent | 1.3.6.1.4.1.272.4.1.44 | INTEGER | read-write | Defines the ifOperStatus transition(s) of an ifTable object that generates a SNMP linkUp/linkDown trap: none : disable linkUp/linkDown trap generation. any : enable bintec like trap generation. - entering the up state generates a up trap - any other state change generates a down trap up : enable rfc1157 like trap generation. - entering the up state generates a up trap - leaving the up state generates a down trap down : enable rfc2233 like trap generation. - leaving the down state generates a up trap - entering the down state generates a down trap Seven parameters are sent in each linkUp/linkDown trap pdu: 1. ifEntry.ifIndex (mandatory for linkUp/Down traps) 2. ifEntry.ifDescr 3. ifEntry.ifType 4. ifEntry.ifAdminStatus 5. ifEntry.ifOperStatus 6. system.Description 7. system.Name |
| INT biboAdmSnmpPort | 1.3.6.1.4.1.272.4.1.6 | INTEGER | read-write | SNMP listen port. |
| INT biboAdmSnmpTrapPort | 1.3.6.1.4.1.272.4.1.7 | INTEGER | read-write | SNMP trap port. |
| INT biboAdmSnmpVersion | 1.3.6.1.4.1.272.4.1.5 | INTEGER | read-write | SNMP Version. version1 : SNMP version V1 version1_compat : SNMP version V1 compatibility mode without the appending private OID part (.i). This is for some SNMP managers that cannot handle this extension. In this mode rows with identical index variable content cannot be read correctly. p1 (patch1) : getnext returns the lexicographical next OID (ever!) version1p1_auto : use version1p1_compat if possible use version1p1 if nessesary Usually the OIDs have the format: .1.3.6.x.x .y.y .i .1.3.6.x.x: is the constant part of the OID of the variable specified in MIB-source .y.y : is the specific part of the OID to identify exactly a row. It is the content of all index variables. .i : is a consecutively incremented index number, to distinguish rows with identical index variables |
| STR biboAdmSWVersion | 1.3.6.1.4.1.272.4.1.26 | DisplayString | read-only | This is the software release version |
| biboAdmSyslogEntry | 1.3.6.1.4.1.272.4.1.12.1 | not-accessible | ||
| INT biboAdmSyslogLevel | 1.3.6.1.4.1.272.4.1.12.1.2 | INTEGER | read-only | Level of syslog message. |
| INT biboAdmSyslogMaxEntries | 1.3.6.1.4.1.272.4.1.11 | INTEGER | read-write | Maximum Number of syslog messages stored in memory. |
| STR biboAdmSyslogMessage | 1.3.6.1.4.1.272.4.1.12.1.4 | DisplayString | read-only | The text of the syslog message. |
| INT biboAdmSyslogSubject | 1.3.6.1.4.1.272.4.1.12.1.5 | INTEGER | read-only | Subject of the syslog message. |
| biboAdmSyslogTable | 1.3.6.1.4.1.272.4.1.12 | not-accessible | The biboAdmSyslogTable keeps track of syslog messages received. The size of the table (number of entries), is limited by the value of biboAdmSyslogMaxEntries. The columns specify attributes for each message generated. As this information only reports events on the system, all fields are read-only. Creating entries: Entries can only be created by the system and are made each time a syslog message is generated. Deleting entries: Entries are removed by the system once the size limit (biboAdmSyslogMaxEntries) is reached. | |
| INT biboAdmSyslogTableLevel | 1.3.6.1.4.1.272.4.1.30 | INTEGER | read-write | Specifies which message levels to post to the biboAdmSyslogTable and the console, if applicable. |
| DAT biboAdmSyslogTimeStamp | 1.3.6.1.4.1.272.4.1.12.1.1 | Date | read-only | Time message was generated. |
| STR biboAdmSystemId | 1.3.6.1.4.1.272.4.1.31 | DisplayString | read-only | This object contains the system Identification String. |
| INT biboAdmTapiTcpPort | 1.3.6.1.4.1.272.4.1.37 | INTEGER | read-write | TCP port for remote TAPI demon. |
| INT biboAdmTimeOffset | 1.3.6.1.4.1.272.4.1.28 | INTEGER | read-write | This is the time offset from GMT in seconds. If the set value is in the range from -24 to 24, it means hours, and is automatically converted to seconds. |
| INT biboAdmTimeProtocol | 1.3.6.1.4.1.272.4.1.38 | INTEGER | read-write | This field specifies from which source the bricks internal clock is synchronised: none(1) = no time synchronisation time-udp(2) = UDP/TIME (RFC 868), from biboAdmTimeServer time-tcp(3) = TCP/TIME (RFC 868), from biboAdmTimeServer time-sntp(4) = SNTP (RFC 1769), from biboAdmTimeServer isdn(5) = examines ISDN time, from controller stack 0 |
| IP biboAdmTimeServer | 1.3.6.1.4.1.272.4.1.27 | IpAddress | read-write | The IP address of the time server. |
| INT biboAdmTimeUpdate | 1.3.6.1.4.1.272.4.1.39 | INTEGER | read-write | This is the intervall for timeserver requests (in seconds). If the set value is in the range from -24 to 24, it means hours, and is automatically converted to seconds. If the time comes from ISDN, the time is updated with the next call after this intervall. |
| INT biboAdmTraceTcpPort | 1.3.6.1.4.1.272.4.1.24 | INTEGER | read-write | TCP port for trace demon. |
| NTF biboAdmTrapACrdDown | 1.3.6.1.4.1.272.4.1.43.0.3 | This trap signifies that the specified Card is down | ||
| NTF biboAdmTrapACrdFailed | 1.3.6.1.4.1.272.4.1.43.0.5 | This trap signifies that the specified Card has failed | ||
| NTF biboAdmTrapACrdRunning | 1.3.6.1.4.1.272.4.1.43.0.4 | This trap signifies that the specified Card is up/running | ||
| NTF biboAdmTrapACrdStopped | 1.3.6.1.4.1.272.4.1.43.0.6 | This trap signifies that the specified Card is stopped | ||
| NTF biboAdmTrapACrdTempCritical | 1.3.6.1.4.1.272.4.1.43.0.1 | This trap signifies that the Card temperature raises above the critical alarm-threshold | ||
| NTF biboAdmTrapACrdTempOk | 1.3.6.1.4.1.272.4.1.43.0.2 | A normal Card temperature has been restored. | ||
| INT biboAdmTrapBrdCast | 1.3.6.1.4.1.272.4.1.9 | INTEGER | read-write | Enable/disable trap broadcasting. |
| STR biboAdmTrapCommunity | 1.3.6.1.4.1.272.4.1.4 | DisplayString | read-write | Community name for sending traps. |
| IP biboAdmTrapHostAddr | 1.3.6.1.4.1.272.4.1.10.1.1 | IpAddress | read-write | Ip-Address where traps are sent. |
| biboAdmTrapHostEntry | 1.3.6.1.4.1.272.4.1.10.1 | not-accessible | ||
| INT biboAdmTrapHostStatus | 1.3.6.1.4.1.272.4.1.10.1.2 | INTEGER | read-write | Status is always valid, and set to delete only to discard the whole entry. |
| biboAdmTrapHostTable | 1.3.6.1.4.1.272.4.1.10 | not-accessible | The biboAdmTrapHostTable defines where traps are sent (i.e., which hosts). If the table is empty traps are broadcasted. Creating entries: Entries are added by assigning an IP address value to the biboAdmTrapHostAddr field. Deleting entries: Entries can be removed by assigning ing the respective biboAdmTrapHostStatus field to 'delete'. | |
| biboAdmTraps | 1.3.6.1.4.1.272.4.1.43 | |||
| biboAdmUsrTrapEntry | 1.3.6.1.4.1.272.4.1.18.1 | not-accessible | ||
| biboAdmUsrTrapTable | 1.3.6.1.4.1.272.4.1.18 | not-accessible | The biboAdmUsrTrapTable lists user-defined objects that are used to create traps. These traps are sent locally, but can also be sent to remote hosts using the biboAdmTrapHostTable. Creating entries: Entries are created by assigning the biboATrpObj object a valid object identifier. Deleting entries: Entries are removed by setting the entry's biboATrpStatus object to 'delete'. | |
| IP biboAdmWINS1 | 1.3.6.1.4.1.272.4.1.40 | IpAddress | read-write | The IP address of the WINS server (NetBIOS Name Server). |
| IP biboAdmWINS2 | 1.3.6.1.4.1.272.4.1.41 | IpAddress | read-write | The IP address of the alternate WINS server. |
| OID biboATrpObj | 1.3.6.1.4.1.272.4.1.18.1.1 | OBJECT IDENTIFIER | read-write | The object identifier of an object to use. Each time this object's value changes, a trap is created and sent. Either a single leaf (single variable) or a table (of objects) can be specified. |
| INT biboATrpStatus | 1.3.6.1.4.1.272.4.1.18.1.2 | INTEGER | read-write | The status of this entry. Upon creation of a new entry, this object's value is set to 'valid'. |
| IP biboExtAdmMonAddress | 1.3.6.1.4.1.272.4.22.1.1 | IpAddress | read-write | The IP address of the host machine running the Activity Monitor program. This program displays the information about the current state of all interfaces. Periodically UDP packets are send to this IP address, to refresh the data automatically on the target host. The value 255.255.255.255 represents the broadcast address of the first LAN interface (e.g. 10.255.255.255), so more than one Activity Monitor on different hosts can receive the data. |
| INT biboExtAdmMonPort | 1.3.6.1.4.1.272.4.22.1.2 | INTEGER | read-write | UDP port for the Activity Monitor protocol. |
| INT biboExtAdmMonType | 1.3.6.1.4.1.272.4.22.1.3 | INTEGER | read-write | This parameter configures the content of the Activity Monitor packets, or disables it: off : Activity Monitor disabled physical : send only physical interfaces information physical-virt: send physical and virtual interface information. |
| INT biboExtAdmMonUpdate | 1.3.6.1.4.1.272.4.22.1.4 | INTEGER | read-write | This is the time interval for the Activity Monitor for sending packets (in seconds) to the specified IP address. The value of 0 disables sending Activity Monitor packets. |
| bintec | 1.3.6.1.4.1.272 | |||
| dod | 1.3.6 | |||
| enterprises | 1.3.6.1.4.1 | |||
| extadmin | 1.3.6.1.4.1.272.4.22.1 | |||
| internet | 1.3.6.1 | |||
| org | 1.3 | |||
| private | 1.3.6.1.4 |
RFC description
BinTec BIANCA/BRICK router management including SNMP configuration, trap settings, and device administration parameters.
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.