All MIBs › BIANCA-BRICK-X25PAD-MIB › x25PadProBrkControl
x25PadProBrkControl
Module: BIANCA-BRICK-X25PAD-MIB
OID (symbolic): BIANCA-BRICK-X25PAD-MIB::x25PadProBrkControl
OID (numeric): 1.3.6.1.4.1.272.4.6.8.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value of the parameter seven. This parameter allows the selection of the operation of the PAD after the receipt of a BREAK-signal from the start-stop DTE in data-transfer state. The value 0 indicates no operation. Value 1 means that the PAD sends an interrupt packet to packet mode DTE or other PAD. Value 2 indicates RESET but the PAD remains in data-transfer state. Value 4 means that the PAD sends an indication of a BREAK-message to packet mode DTE or other PAD. Value 8 indicates escape from data-transfer state. Value 16 determines discard output to start-stop DTE.
What is x25PadProBrkControl?
This read-write integer (0-21) is X.25 PAD parameter 7, defining what the PAD does when it receives a BREAK signal from the terminal in data-transfer state, such as sending an interrupt packet, resetting the connection, or discarding output, depending on which bit values are set.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.6.8.1.10 snmpwalk -v2c -c public <target> BIANCA-BRICK-X25PAD-MIB::x25PadProBrkControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.6.8.1.10.1 snmpget -v2c -c public <target> BIANCA-BRICK-X25PAD-MIB::x25PadProBrkControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.6.8.1.10.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-X25PAD-MIB::x25PadProBrkControl OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4.6 | x25 | BIANCA-BRICK-X25-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.6.8 | x25PadProfileTable | BIANCA-BRICK-X25PAD-MIB |
| 1.3.6.1.4.1.272.4.6.8.1 | x25PadProfileEntry | BIANCA-BRICK-X25PAD-MIB |
| 1.3.6.1.4.1.272.4.6.8.1.10 | x25PadProBrkControl | BIANCA-BRICK-X25PAD-MIB |