BIANCA-BRICK-X25PAD-MIB :: x25PadProDevControl

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › BIANCA-BRICK-X25PAD-MIB › x25PadProDevControl

x25PadProDevControl

Module: BIANCA-BRICK-X25PAD-MIB

OID (symbolic): BIANCA-BRICK-X25PAD-MIB::x25PadProDevControl

OID (numeric): 1.3.6.1.4.1.272.4.6.8.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The value of the parameter five. This parameter allows for flow control between the PAD and the start-stop DTE. The PAD indicates whether it is ready or not to accept characters from the start-stop DTE by transmitting special characters. These characters are used to switch an ancillary transmitting device on (X-ON; DC1) and off (X-OFF; DC3). The value 0 means no use of DC1 and DC3. Value 1 indicates the use of DC1 and DC3 on data-transfer. Value 2 means the use of DC1 and DC3 on data-transfer and command state.

What is x25PadProDevControl?

This read-write value is X.25 PAD parameter 5, controlling XON/XOFF (DC1/DC3) flow control from the PAD toward the attached terminal: no-use(256) disables it, use-only-data-transfer(1) applies it only during data transfer, and use(2) applies it during both data transfer and command state.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.6.8.1.8
snmpwalk -v2c -c public <target> BIANCA-BRICK-X25PAD-MIB::x25PadProDevControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.6.8.1.8.1
snmpget -v2c -c public <target> BIANCA-BRICK-X25PAD-MIB::x25PadProDevControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.6.8.1.8.1 i <value>

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-X25PAD-MIB::x25PadProDevControl OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.272bintecBIANCA-BOX-ISDN-MIB
1.3.6.1.4.1.272.4biboBIANCA-BOX-ISDN-MIB
1.3.6.1.4.1.272.4.6x25BIANCA-BRICK-X25-MIB
Numeric OIDNameModule
1.3.6.1.4.1.272.4.6.8x25PadProfileTableBIANCA-BRICK-X25PAD-MIB
1.3.6.1.4.1.272.4.6.8.1x25PadProfileEntryBIANCA-BRICK-X25PAD-MIB
1.3.6.1.4.1.272.4.6.8.1.8x25PadProDevControlBIANCA-BRICK-X25PAD-MIB