All MIBs › BIANCA-BRICK-MIB › biboAdmConfigCmd
biboAdmConfigCmd
Module: BIANCA-BRICK-MIB
OID (symbolic): BIANCA-BRICK-MIB::biboAdmConfigCmd
OID (numeric): 1.3.6.1.4.1.272.4.1.14.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Command for configuration handling. Possible values are :
save(1) = save configuration (to FLASH) load(2) = load configuration (from FLASH) put(3) = write configuration (via TFTP) get(4) = read configuration (via TFTP) state(5) = write complete configuration (via TFTP) delete(6) = delete configuration (within FLASH) move(7) = move configuration (within FLASH) copy(8) = copy configuration (within FLASH) reboot(9) = reboot the system reorg(10) = reorganizes the flash
What is biboAdmConfigCmd?
Command for configuration handling. Possible values are : save(1) = save configuration (to FLASH) load(2) = load configuration (from FLASH) put(3) = write configuration (via TFTP) get(4) = read configuration (via TFTP) state(5) = write complete configuration (via TFTP) delete(6) = delete configuration (within FLASH) move(7) = move configuration (within FLASH) copy(8) = copy configuration (within FLASH) reboot(9) = reboot the system reorg(10) = reorganize. Allows configuration changes to tune protocol behavior and resource allocation. Example: consult device documentation for valid ranges and expected operational values.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.1.14.1.1 snmpwalk -v2c -c public <target> BIANCA-BRICK-MIB::biboAdmConfigCmd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.1.14.1.1.1 snmpget -v2c -c public <target> BIANCA-BRICK-MIB::biboAdmConfigCmd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.1.14.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> biboAdmConfigCmd.1
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-MIB::biboAdmConfigCmd OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.1 | admin | BIANCA-BRICK-MIB |
| 1.3.6.1.4.1.272.4.1.14 | biboAdmConfigTable | BIANCA-BRICK-MIB |
| 1.3.6.1.4.1.272.4.1.14.1 | biboAdmConfigEntry | BIANCA-BRICK-MIB |
| 1.3.6.1.4.1.272.4.1.14.1.1 | biboAdmConfigCmd | BIANCA-BRICK-MIB |