All MIBs › BIANCA-BRICK-MIB › biboAdmSnmpLinkTrapEvent
biboAdmSnmpLinkTrapEvent
Module: BIANCA-BRICK-MIB
OID (symbolic): BIANCA-BRICK-MIB::biboAdmSnmpLinkTrapEvent
OID (numeric): 1.3.6.1.4.1.272.4.1.44
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the ifOperStatus transition(s) of an ifTable object that generates a SNMP linkUp/linkDown trap:
none : disable linkUp/linkDown trap generation.
any : enable bintec like trap generation. - entering the up state generates a up trap - any other state change generates a down trap
up : enable rfc1157 like trap generation. - entering the up state generates a up trap - leaving the up state generates a down trap
down : enable rfc2233 like trap generation. - leaving the down state generates a up trap - entering the down state generates a down trap
Seven parameters are sent in each linkUp/linkDown trap pdu: 1. ifEntry.ifIndex (mandatory for linkUp/Down traps) 2. ifEntry.ifDescr 3. ifEntry.ifType 4. ifEntry.ifAdminStatus 5. ifEntry.ifOperStatus 6. system.Description 7. system.Name
What is biboAdmSnmpLinkTrapEvent?
Defines the ifOperStatus transition(s) of an ifTable object that generates a SNMP linkUp/linkDown trap: none : disable linkUp/linkDown trap generation. Network administrators can modify biboAdmSnmpLinkTrapEvent to configure behavior; changes typically take effect immediately or after reconnection. For example, typical values range from 1 to 10 depending on configuration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.272.4.1.44 snmpwalk -v2c -c public <target> BIANCA-BRICK-MIB::biboAdmSnmpLinkTrapEvent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.272.4.1.44.1 snmpget -v2c -c public <target> BIANCA-BRICK-MIB::biboAdmSnmpLinkTrapEvent.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.272.4.1.44.1 i <value>
Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BIANCA-BRICK-MIB::biboAdmSnmpLinkTrapEvent OID value, configure state conditions and alerts, and monitor any bintec BIANCA/BRICK ISDN/VPN routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.272 | bintec | BIANCA-BOX-ISDN-MIB |
| 1.3.6.1.4.1.272.4 | bibo | BIANCA-BOX-ISDN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.272.4.1 | admin | BIANCA-BRICK-MIB |
| 1.3.6.1.4.1.272.4.1.44 | biboAdmSnmpLinkTrapEvent | BIANCA-BRICK-MIB |