BDCOM-TS

All MIBs › BDCOM-TS

Category: Device Management, Vendor: BDCOM

Description: Manages terminal server (console/AUX) configuration and session statistics on BDCOM networking devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BDCOM-TS?

BDCOM-TS is a vendor-specific MIB from BDCOM Technology, a networking equipment vendor, for managing terminal server functionality (console and AUX port access) on BDCOM routers and switches. Based on its stated purpose it exposes configuration data for serial console access parameters alongside session-oriented statistics such as active login sessions and connection counts. It is used to monitor the software-level status of out-of-band management access, confirming whether console/AUX ports are in use, locked, or available, rather than exposing physical hardware sensors like temperature or fan speed. No module description or sample object names were retrievable for this MIB, so its specific dependency relationships beyond standard SNMPv2-SMI conventions cannot be confirmed. It's typically deployed in small-to-midsize ISP or enterprise networks running BDCOM routers/switches, used for out-of-band console session management and access auditing, a role where BDCOM-TS SNMP monitoring helps detect unexpected or idle console sessions.

IPNetwork Monitor allows you to monitor SNMP objects defined in BDCOM-TS. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

BDCOM router
BDCOM switch

Monitoring Examples

No sample object or table names were available for this MIB in the extracted metadata, so a concrete polling example cannot be grounded in real identifiers. In general, a terminal-server MIB of this kind would be polled for active session count and session state, which an admin would use to detect an idle console session left open or unexpected simultaneous access to the console/AUX port.

What Can Be Monitored

console/AUX port configuration
active console session count
session connection state

Imported Objects

From BDCOM-SMI

bdlocal

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
bdlts	1.3.6.1.4.1.3320.2.9
INT bdtsLines	1.3.6.1.4.1.3320.2.9.1	INTEGER	read-only	Number of terminal lines on this device. Includes virtual lines.
bdltsLineTable	1.3.6.1.4.1.3320.2.9.2		not-accessible	A list of terminal server line entries.
bdltsLineEntry	1.3.6.1.4.1.3320.2.9.2.1		not-accessible	A collection of per TTY objects in the BDCom Terminal Server implementation.
INT bdtsLineActive	1.3.6.1.4.1.3320.2.9.2.1.1	INTEGER	read-only	Boolean whether this line is active or not.
INT bdtsLineType	1.3.6.1.4.1.3320.2.9.2.1.2	INTEGER	read-only	Type of line.
INT bdtsLineAutobaud	1.3.6.1.4.1.3320.2.9.2.1.3	INTEGER	read-only	Boolean whether line will autobaud or not.
INT bdtsLineSpeedin	1.3.6.1.4.1.3320.2.9.2.1.4	INTEGER	read-only	What input speed the line is running at.
INT bdtsLineSpeedout	1.3.6.1.4.1.3320.2.9.2.1.5	INTEGER	read-only	What output speed the line is running at.
INT bdtsLineFlow	1.3.6.1.4.1.3320.2.9.2.1.6	INTEGER	read-only	What kind of flow control the line is using.
INT bdtsLineModem	1.3.6.1.4.1.3320.2.9.2.1.7	INTEGER	read-only	What kind of modem control the line is using.
STR bdtsLineLoc	1.3.6.1.4.1.3320.2.9.2.1.8	DisplayString	read-only	Describes the line's physical location.
STR bdtsLineTerm	1.3.6.1.4.1.3320.2.9.2.1.9	DisplayString	read-only	Describes the line's terminal type.
INT bdtsLineScrlen	1.3.6.1.4.1.3320.2.9.2.1.10	INTEGER	read-only	Length in lines of the screen of terminal attached to this line.
INT bdtsLineScrwid	1.3.6.1.4.1.3320.2.9.2.1.11	INTEGER	read-only	Width in characters of the screen of terminal attached to this line.
STR bdtsLineEsc	1.3.6.1.4.1.3320.2.9.2.1.12	DisplayString	read-only	Escape character used to break out of active sessions.
INT bdtsLineTmo	1.3.6.1.4.1.3320.2.9.2.1.13	INTEGER	read-only	Line idleness timeout in seconds.
INT bdtsLineSestmo	1.3.6.1.4.1.3320.2.9.2.1.14	INTEGER	read-only	Session idleness timeout in seconds.
INT bdtsLineRotary	1.3.6.1.4.1.3320.2.9.2.1.15	INTEGER	read-only	Rotary group number the line belongs in.
INT bdtsLineUses	1.3.6.1.4.1.3320.2.9.2.1.16	INTEGER	read-only	Number of times a connection has been made to or from this line.
INT bdtsLineNses	1.3.6.1.4.1.3320.2.9.2.1.17	INTEGER	read-only	Current number of sessions in use on this line.
STR bdtsLineUser	1.3.6.1.4.1.3320.2.9.2.1.18	DisplayString	read-only	TACACS user name, if TACACS enabled, of user on this line.
INT bdtsLineNoise	1.3.6.1.4.1.3320.2.9.2.1.19	INTEGER	read-only	Count of garbage characters received when line inactive.
INT bdtsLineNumber	1.3.6.1.4.1.3320.2.9.2.1.20	INTEGER	read-only	The line i've been talking about.
INT bdtsLineTimeActive	1.3.6.1.4.1.3320.2.9.2.1.21	INTEGER	read-only	The time in seconds since line was activated.
bdltsLineSessionTable	1.3.6.1.4.1.3320.2.9.3		not-accessible	A list of terminal server line and session entries.
bdltsLineSessionEntry	1.3.6.1.4.1.3320.2.9.3.1		not-accessible	A collection of per session and per TTY objects in the BDCom Terminal Server implementation.
INT bdtslineSesType	1.3.6.1.4.1.3320.2.9.3.1.1	INTEGER	read-only	Type of session.
INT bdtslineSesDir	1.3.6.1.4.1.3320.2.9.3.1.2	INTEGER	read-only	Direction of session.
IP bdtslineSesAddr	1.3.6.1.4.1.3320.2.9.3.1.3	IpAddress	read-only	Remote host address of session. [What about PAD connections?]
STR bdtslineSesName	1.3.6.1.4.1.3320.2.9.3.1.4	DisplayString	read-only	Remote host name of session.
INT bdtslineSesCur	1.3.6.1.4.1.3320.2.9.3.1.5	INTEGER	read-only	Boolean whether session is the currently active one.
INT bdtslineSesIdle	1.3.6.1.4.1.3320.2.9.3.1.6	INTEGER	read-only	Time in seconds session has been idle.
INT bdtslineSesLine	1.3.6.1.4.1.3320.2.9.3.1.7	INTEGER	read-only	Table index 1.
INT bdtslineSesSession	1.3.6.1.4.1.3320.2.9.3.1.8	INTEGER	read-only	Table index 2.
INT bdtsMsgTtyLine	1.3.6.1.4.1.3320.2.9.4	INTEGER	read-write	tty line to send the message to. -1 will send it to all tty lines
INT bdtsMsgIntervaltim	1.3.6.1.4.1.3320.2.9.5	INTEGER	read-write	Interval between reissuing message in milliseconds. Minimum non-zero setting is 10000. 0 will cause the routine to choose its own intervals becoming more frequent as MessageDuration gets close to expiring. 2hr, 1hr, 30min, 5min, 1min
INT bdtsMsgDuration	1.3.6.1.4.1.3320.2.9.6	INTEGER	read-write	Length of time to reissue message in milliseconds. Minimum non-zero setting is 10000. A setting of 0 will not repeat the message.
STR bdtsMsgText	1.3.6.1.4.1.3320.2.9.7	DisplayString	read-write	Up to 256 characters that will make up the message
INT bdtsMsgTmpBanner	1.3.6.1.4.1.3320.2.9.8	INTEGER	read-write	Should the message be used as a temporary banner. 1 - No. 2 - In addition to the normal banner
INT bdtsMsgSend	1.3.6.1.4.1.3320.2.9.9	INTEGER	read-write	Sends the message. The value determines what to do after the message has completed.
INT bdtsClrTtyLine	1.3.6.1.4.1.3320.2.9.10	INTEGER	read-write	tty line to clear. Read returns the last line cleared. A value of -1 indicates no lines have been cleared.

RFC description

Manages BDCOM terminal server configurations including line settings, speed, flow control, and modems.

Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BDCOM-TS

What Is BDCOM-TS?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description