All MIBs › BDCOM-TS › bdtsMsgTtyLine
bdtsMsgTtyLine
Module: BDCOM-TS
OID (symbolic): BDCOM-TS::bdtsMsgTtyLine
OID (numeric): 1.3.6.1.4.1.3320.2.9.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: tty line to send the message to. -1 will send it to all tty lines
What is bdtsMsgTtyLine?
This read-write OID specifies which TTY line receives a broadcast message. Setting to -1 sends the message to all TTY lines. Example: writing 3 sends a message to terminal line 3; writing -1 sends to all lines.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.9.4 snmpwalk -v2c -c public <target> BDCOM-TS::bdtsMsgTtyLine
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.9.4.1 snmpget -v2c -c public <target> BDCOM-TS::bdtsMsgTtyLine.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3320.2.9.4.1 i <value>
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-TS::bdtsMsgTtyLine OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.2 | bdlocal | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.2.9 | bdlts | BDCOM-TS |
| 1.3.6.1.4.1.3320.2.9.4 | bdtsMsgTtyLine | BDCOM-TS |