All MIBs › BDCOM-TS › bdtsMsgIntervaltim
bdtsMsgIntervaltim
Module: BDCOM-TS
OID (symbolic): BDCOM-TS::bdtsMsgIntervaltim
OID (numeric): 1.3.6.1.4.1.3320.2.9.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Interval between reissuing message in milliseconds. Minimum non-zero setting is 10000. 0 will cause the routine to choose its own intervals becoming more frequent as MessageDuration gets close to expiring. 2hr, 1hr, 30min, 5min, 1min
What is bdtsMsgIntervaltim?
This read-write OID sets the interval (in milliseconds) between message reissues. Minimum is 10000 ms (10 seconds). A value of 0 causes automatic interval spacing. Example: writing 30000 reissues the message every 30 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.9.5 snmpwalk -v2c -c public <target> BDCOM-TS::bdtsMsgIntervaltim
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.9.5.1 snmpget -v2c -c public <target> BDCOM-TS::bdtsMsgIntervaltim.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3320.2.9.5.1 i <value>
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-TS::bdtsMsgIntervaltim OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.2 | bdlocal | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.2.9 | bdlts | BDCOM-TS |
| 1.3.6.1.4.1.3320.2.9.5 | bdtsMsgIntervaltim | BDCOM-TS |