AVICI-MODULE-MIB

All MIBs › AVICI-MODULE-MIB

Organization: Avici Systems, Inc.

Last Updated: 2001-03-16

Category: Device Management, Vendor: Avici

Description: Manages line card and forwarding module inventory, operational state, and restart statistics on Avici backbone routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AVICI-MODULE-MIB?

AVICI-MODULE-MIB manages the line-card/forwarding-module inventory and health of Avici Systems backbone routers, monitoring and controlling individual modules within the chassis. It exposes both configuration/inventory data (serial numbers, assembly revision, description) and operational status data (admin/oper status, uptime, temperature), making it a classic hardware-status MIB. It directly supports monitoring of hardware health — module uptime (aviciModuleUpTime), current vs. maximum operating temperature (aviciModuleCurrTemp/aviciModuleMaxTemp), and administrative vs. operational state (aviciModuleAdminStatus/aviciModuleOperStatus) together reveal whether a module is running, overheating, or has been administratively taken down. It depends on the related AVICI-FABRIC-MIB and other Avici chassis MIBs that together describe the full router, and defines its own notifications (aviciModuleNotifications) for module state-change alerts. It is deployed in service-provider backbone routing environments using modular Avici TSR chassis routers. Engineers can download the AVICI-MODULE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AVICI-MODULE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Avici Systems modular backbone router (line/forwarding module)

Monitoring Examples

An admin would poll aviciModuleTable/aviciModuleEntry to compare aviciModuleAdminStatus against aviciModuleOperStatus for each line card — a module administratively "up" but operationally "down" indicates a hardware fault or failed boot. aviciModuleCurrTemp trending toward aviciModuleMaxTemp signals an overheating card needing cooling or replacement, while aviciModuleUpTime resetting unexpectedly flags an unplanned reboot. Serial number fields (aviciModuleAssySerialNumber, aviciModuleLineSerialNumber, aviciModuleMbSerialNumber) let the operator pin the alert to a specific physical card during a hardware swap.

What Can Be Monitored

module admin status
module operational status
module uptime
current and maximum temperature
module serial numbers and assembly revision

Imported Objects

From AVICI-BAY-MIB

aviciBayIndex	OBJECT-TYPE
aviciSlotIndex	OBJECT-TYPE

From AVICI-SMI

aviciMibs

OBJECT-IDENTITY

From AVICI-SYSTEM-MIB

aviciSysTrapDescr

OBJECT-TYPE

From AVICI-TC

AviciHighAvailabilityType
AviciPartNumberType
AviciProductIdType
AviciRevisionType
AviciSerialNumberType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using aviciModuleIpInReceives OID:

Select an Avici Systems core/backbone router (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type aviciModuleIpInReceives into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of input datagrams received from interfaces, including those received in error. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF aviciAllServerAccessModulesDown	1.3.6.1.4.1.2474.1.5.4.0.3			The aviciAllServerAccessModulesDown notification signifies that all server access modules have gone down.
NTF aviciAllServerAccessModulesDownClear	1.3.6.1.4.1.2474.1.5.4.0.4			The aviciAllServerAccessModulesDownClear notification signifies that at least one server access module has come up.
INT aviciModuleAdminStatus	1.3.6.1.4.1.2474.1.5.1.1.1.1	INTEGER	read-write	The administrative state of this module.
AVI aviciModuleAssyProductId	1.3.6.1.4.1.2474.1.5.1.1.1.15	AviciProductIdType	read-only	The product identification number of the module assembly in the slot.
AVI aviciModuleAssyRevision	1.3.6.1.4.1.2474.1.5.1.1.1.10	AviciRevisionType	read-only	The revision number of the module assembly in the slot.
AVI aviciModuleAssySerialNumber	1.3.6.1.4.1.2474.1.5.1.1.1.7	AviciSerialNumberType	read-only	The serial number of the module assembly in the slot.
NTF aviciModuleColdStart	1.3.6.1.4.1.2474.1.5.2.0.1			An aviciModuleColdStart trap indicates that the specified module has powered-up.
I32 aviciModuleCurrTemp	1.3.6.1.4.1.2474.1.5.1.1.1.4	Integer32	read-only	The current temperature of the module in degrees C.
STR aviciModuleDescr	1.3.6.1.4.1.2474.1.5.1.1.1.6	DisplayString	read-only	A text string containing a description of the type of module card in the slot.
NTF aviciModuleDown	1.3.6.1.4.1.2474.1.5.2.0.3			The aviciModuleDown notification indicates that a server is no longer communicating with the specified module after having established communication.
aviciModuleEntry	1.3.6.1.4.1.2474.1.5.1.1.1		not-accessible	The status and parameter values for a module in the TSR bay.
STR aviciModuleFirmwareVersion	1.3.6.1.4.1.2474.1.5.1.1.1.14	DisplayString	read-only	The version of the firmware running on the module in the slot.
aviciModuleGroup	1.3.6.1.4.1.2474.1.5.3.2.1			Objects for the module.
aviciModuleIcmpCountersGroup	1.3.6.1.4.1.2474.1.5.3.2.3			Internet Control Message Protocol Counter statistics for the module.
aviciModuleIcmpEntry	1.3.6.1.4.1.2474.1.5.1.3.1		not-accessible
C64 aviciModuleIcmpInAddrMaskReps	1.3.6.1.4.1.2474.1.5.1.3.1.13	Counter64	read-only	The number of ICMP address mask reply messages received.
C64 aviciModuleIcmpInAddrMasks	1.3.6.1.4.1.2474.1.5.1.3.1.12	Counter64	read-only	The number of ICMP address mask request messages received.
C64 aviciModuleIcmpInDestUnreachs	1.3.6.1.4.1.2474.1.5.1.3.1.3	Counter64	read-only	The number of ICMP destination unreachable messages received.
C64 aviciModuleIcmpInEchoReps	1.3.6.1.4.1.2474.1.5.1.3.1.9	Counter64	read-only	The number of ICMP echo reply messages received.
C64 aviciModuleIcmpInEchos	1.3.6.1.4.1.2474.1.5.1.3.1.8	Counter64	read-only	The number of ICMP echo request messages received.
C64 aviciModuleIcmpInErrors	1.3.6.1.4.1.2474.1.5.1.3.1.2	Counter64	read-only	The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
C64 aviciModuleIcmpInMsgs	1.3.6.1.4.1.2474.1.5.1.3.1.1	Counter64	read-only	The total number of ICMP messages which the entity received. Note that this counter includes all those counted by aviciModuleIcmpInErrors.
C64 aviciModuleIcmpInParmProbs	1.3.6.1.4.1.2474.1.5.1.3.1.5	Counter64	read-only	The number of ICMP parameter problem messages received.
C64 aviciModuleIcmpInRedirects	1.3.6.1.4.1.2474.1.5.1.3.1.7	Counter64	read-only	The number of ICMP redirect messages received.
C64 aviciModuleIcmpInSrcQuenchs	1.3.6.1.4.1.2474.1.5.1.3.1.6	Counter64	read-only	The number of ICMP source quench messages received.
C64 aviciModuleIcmpInTimeExcds	1.3.6.1.4.1.2474.1.5.1.3.1.4	Counter64	read-only	The number of ICMP time exceeded messages received.
C64 aviciModuleIcmpInTimestampReps	1.3.6.1.4.1.2474.1.5.1.3.1.11	Counter64	read-only	The number of ICMP timestamp reply messages received.
C64 aviciModuleIcmpInTimestamps	1.3.6.1.4.1.2474.1.5.1.3.1.10	Counter64	read-only	The number of ICMP timestamp request messages received.
C64 aviciModuleIcmpOutAddrMaskReps	1.3.6.1.4.1.2474.1.5.1.3.1.26	Counter64	read-only	The number of ICMP address mask reply messages sent.
C64 aviciModuleIcmpOutAddrMasks	1.3.6.1.4.1.2474.1.5.1.3.1.25	Counter64	read-only	The number of ICMP address mask request messages sent.
C64 aviciModuleIcmpOutDestUnreachs	1.3.6.1.4.1.2474.1.5.1.3.1.16	Counter64	read-only	The number of ICMP destination unreachable messages sent.
C64 aviciModuleIcmpOutEchoReps	1.3.6.1.4.1.2474.1.5.1.3.1.22	Counter64	read-only	The number of ICMP echo reply messages sent.
C64 aviciModuleIcmpOutEchos	1.3.6.1.4.1.2474.1.5.1.3.1.21	Counter64	read-only	The number of ICMP echo request messages sent.
C64 aviciModuleIcmpOutErrors	1.3.6.1.4.1.2474.1.5.1.3.1.15	Counter64	read-only	The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value.
C64 aviciModuleIcmpOutMsgs	1.3.6.1.4.1.2474.1.5.1.3.1.14	Counter64	read-only	The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by tsrIcmpOutErrors.
C64 aviciModuleIcmpOutParmProbs	1.3.6.1.4.1.2474.1.5.1.3.1.18	Counter64	read-only	The number of ICMP parameter problem messages sent.
C64 aviciModuleIcmpOutRedirects	1.3.6.1.4.1.2474.1.5.1.3.1.20	Counter64	read-only	The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
C64 aviciModuleIcmpOutSrcQuenchs	1.3.6.1.4.1.2474.1.5.1.3.1.19	Counter64	read-only	The number of ICMP source quench messages sent.
C64 aviciModuleIcmpOutTimeExcds	1.3.6.1.4.1.2474.1.5.1.3.1.17	Counter64	read-only	The number of ICMP time exceeded messages sent.
C64 aviciModuleIcmpOutTimestampReps	1.3.6.1.4.1.2474.1.5.1.3.1.24	Counter64	read-only	The number of ICMP timestamp reply messages sent.
C64 aviciModuleIcmpOutTimestamps	1.3.6.1.4.1.2474.1.5.1.3.1.23	Counter64	read-only	The number of ICMP timestamp request messages sent.
aviciModuleIcmpTable	1.3.6.1.4.1.2474.1.5.1.3		not-accessible	This table contains the per-module Avici proprietary ICMP counters.
NTF aviciModuleIncompatibleSW	1.3.6.1.4.1.2474.1.5.2.0.9			The aviciModuleIncompatibleSW notification signifies that the module is running a software image that is incompatible with the server image.
aviciModuleIpCountersGroup	1.3.6.1.4.1.2474.1.5.3.2.2			Internet Protocol Counter statistics for the module.
aviciModuleIpEntry	1.3.6.1.4.1.2474.1.5.1.2.1		not-accessible	The per module aggregate IP counters.
C64 aviciModuleIpForwDatagrams	1.3.6.1.4.1.2474.1.5.1.2.1.4	Counter64	read-only	The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP routers, this counter will include only those packets which were Source-Routed via this entity, and the Source-Route option processing was successful.
C64 aviciModuleIpFragCreates	1.3.6.1.4.1.2474.1.5.1.2.1.13	Counter64	read-only	The number of IP datagram fragments that have been generated as a result of fragmentation at this entity.
C64 aviciModuleIpFragFails	1.3.6.1.4.1.2474.1.5.1.2.1.12	Counter64	read-only	The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set.
C64 aviciModuleIpFragOKs	1.3.6.1.4.1.2474.1.5.1.2.1.11	Counter64	read-only	The number of IP datagrams that have been successfully fragmented at this entity.
C64 aviciModuleIpInAddrErrors	1.3.6.1.4.1.2474.1.5.1.2.1.3	Counter64	read-only	The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address.
C64 aviciModuleIpInDelivers	1.3.6.1.4.1.2474.1.5.1.2.1.7	Counter64	read-only	The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
C64 aviciModuleIpInDiscards	1.3.6.1.4.1.2474.1.5.1.2.1.6	Counter64	read-only	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
C64 aviciModuleIpInHdrErrors	1.3.6.1.4.1.2474.1.5.1.2.1.2	Counter64	read-only	The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc.
C64 aviciModuleIpInReceivesEx	1.3.6.1.4.1.2474.1.5.1.2.1.1	Counter64	read-only	The total number of input datagrams received from interfaces, including those received in error.
C64 aviciModuleIpInUnknownProtos	1.3.6.1.4.1.2474.1.5.1.2.1.5	Counter64	read-only	The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
C64 aviciModuleIpOutDiscards	1.3.6.1.4.1.2474.1.5.1.2.1.9	Counter64	read-only	The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion.
C64 aviciModuleIpOutNoRoutes	1.3.6.1.4.1.2474.1.5.1.2.1.10	Counter64	read-only	The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagrams which a host cannot route because all of its default routers are down.
C64 aviciModuleIpOutRequests	1.3.6.1.4.1.2474.1.5.1.2.1.8	Counter64	read-only	The total number of IP datagrams which local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
aviciModuleIpTable	1.3.6.1.4.1.2474.1.5.1.2		not-accessible	This table contains the per-module Avici proprietary IP counters.
AVI aviciModuleLinePartNumber	1.3.6.1.4.1.2474.1.5.1.1.1.16	AviciPartNumberType	read-only	The part number of the line card attached to the module in the slot.
AVI aviciModuleLineRevision	1.3.6.1.4.1.2474.1.5.1.1.1.11	AviciRevisionType	read-only	The revision number of the line card attached to the module in the slot.
AVI aviciModuleLineSerialNumber	1.3.6.1.4.1.2474.1.5.1.1.1.8	AviciSerialNumberType	read-only	The serial number of the line card attached to the module in the slot.
G32 aviciModuleMaxTemp	1.3.6.1.4.1.2474.1.5.1.1.1.5	Gauge32	read-only	The maximum temperature reported by the module in degrees C.
AVI aviciModuleMbPartNumber	1.3.6.1.4.1.2474.1.5.1.1.1.17	AviciPartNumberType	read-only	The part number of the mother board in the slot.
AVI aviciModuleMbRevision	1.3.6.1.4.1.2474.1.5.1.1.1.12	AviciRevisionType	read-only	The revision number of the mother board in the slot.
AVI aviciModuleMbSerialNumber	1.3.6.1.4.1.2474.1.5.1.1.1.9	AviciSerialNumberType	read-only	The serial number of the mother board in the slot.
aviciModuleMIB	1.3.6.1.4.1.2474.1.5			This MIB module specifies those managed objects that monitor and control a forwarding module.
aviciModuleMIBCompliance	1.3.6.1.4.1.2474.1.5.3.1.1			The compliance statement for the aviciModule.
aviciModuleMIBCompliances	1.3.6.1.4.1.2474.1.5.3.1
aviciModuleMIBConformance	1.3.6.1.4.1.2474.1.5.3
aviciModuleMIBGroups	1.3.6.1.4.1.2474.1.5.3.2
NTF aviciModuleMisconfigured	1.3.6.1.4.1.2474.1.5.2.0.8			An aviciModuleMisconfigured trap indicates when the fabric version mismatch, or a module in a multimodule set is not in the proper slot.
aviciModuleNotificationGroup	1.3.6.1.4.1.2474.1.5.3.2.4			Notifications for the module.
aviciModuleNotificationPrefix	1.3.6.1.4.1.2474.1.5.2.0
aviciModuleNotifications	1.3.6.1.4.1.2474.1.5.2
aviciModuleObjects	1.3.6.1.4.1.2474.1.5.1
INT aviciModuleOperStatus	1.3.6.1.4.1.2474.1.5.1.1.1.2	INTEGER	read-only	The operating state of the module.
STR aviciModuleSoftwareVersion	1.3.6.1.4.1.2474.1.5.1.1.1.13	DisplayString	read-only	The version of the software running on the module in the slot.
aviciModuleTable	1.3.6.1.4.1.2474.1.5.1.1		not-accessible	This table contains parameters and state variables for all modules in the system.
NTF aviciModuleTemperatureCritical	1.3.6.1.4.1.2474.1.5.2.0.7			The aviciModuleTemperatureCritical notification signifies that the specified module is reporting a temperature above the critical temperature threshold. The current module temperature is reported in the aviciModuleCurrTemp object. When the reported temperature drops below the critical threshold, the aviciModuleTemperatureMajor notification will be sent to clear this fault.
NTF aviciModuleTemperatureMajor	1.3.6.1.4.1.2474.1.5.2.0.6			The aviciModuleTemperatureMajor notification signifies that the specified module is reporting a temperature above the major temperature threshold but below the critical temperature threshold. The current module temperature is reported in the aviciModuleCurrTemp object. When the reported temperature drops below the major threshold, the aviciModuleTemperatureMinor notification will be sent to clear this fault.
NTF aviciModuleTemperatureMinor	1.3.6.1.4.1.2474.1.5.2.0.5			The aviciModuleTemperatureMinor notification signifies that the specified module is reporting a temperature above the minor temperature threshold but below the major temperature threshold. The current module temperature is reported in the aviciModuleCurrTemp object. When the reported temperature drops below the minor threshold, the aviciModuleTemperatureNormal notification will be sent to clear this fault.
NTF aviciModuleTemperatureNormal	1.3.6.1.4.1.2474.1.5.2.0.4			The moduleTemperatureNormal notification signifies that the specified module is now operating within the normal temperature range. The current temperature is reported in the aviciModuleCurrTemp object.
TIK aviciModuleUpTime	1.3.6.1.4.1.2474.1.5.1.1.1.3	TimeTicks	read-only	The time in 100ths of seconds since the the module booted.
NTF aviciModuleWarmStart	1.3.6.1.4.1.2474.1.5.2.0.2			An aviciModuleWarmStart notification indicates that the specified module has restarted.
NTF aviciServerAccessModuleDown	1.3.6.1.4.1.2474.1.5.4.0.1			The aviciServerAccessModuleDown notification signifies that a server access module has gone down.
aviciServerAccessModuleEntry	1.3.6.1.4.1.2474.1.5.1.4.1		not-accessible	The status and parameter values for a server access module.
TIK aviciServerAccessModuleLastTransition	1.3.6.1.4.1.2474.1.5.1.4.1.4	TimeTicks	read-only	The last time this Server Access Module transitioned into the primary role.
INT aviciServerAccessModuleLinkStatus	1.3.6.1.4.1.2474.1.5.1.4.1.2	INTEGER	read-only	Current state of the link to this Server Access Module as seen from the server's point of view.
aviciServerAccessModuleNotificationGroup	1.3.6.1.4.1.2474.1.5.3.2.5			Notifications for server access modules.
aviciServerAccessModuleNotificationPrefix	1.3.6.1.4.1.2474.1.5.4.0
aviciServerAccessModuleNotifications	1.3.6.1.4.1.2474.1.5.4
G32 aviciServerAccessModuleNumTransitions	1.3.6.1.4.1.2474.1.5.1.4.1.3	Gauge32	read-only	The number of times this Server Access Module has transitioned into the primary role.
aviciServerAccessModuleTable	1.3.6.1.4.1.2474.1.5.1.4		not-accessible	This table contains parameters and state variables for all server access modules in the system.
AVI aviciServerAccessModuleType	1.3.6.1.4.1.2474.1.5.1.4.1.1	AviciHighAvailabilityType	read-only	The type of Server Access Module (either primary or secondary).
NTF aviciServerAccessModuleUp	1.3.6.1.4.1.2474.1.5.4.0.2			The aviciServerAccessModuleUp notification signifies that a server access module has come up.

RFC description

Avici vendor-private MIB for module management in Avici routing and switching platforms.

Start monitoring Avici Systems core/backbone routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AVICI-MODULE-MIB