ASCEND-MIBBRILT-MIB

All MIBs › ASCEND-MIBBRILT-MIB

Category: Network Interfaces, Vendor: Ascend/Lucent

Description: Manages ISDN BRI LT (Line Termination) interface configuration on Ascend access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBBRILT-MIB?

ASCEND-MIBBRILT-MIB is an Ascend Communications (later Lucent) proprietary MIB defining ISDN BRI leased-line interface profiles on Ascend MAX/Pipeline access equipment. Each profile entry, keyed by shelf/slot/item, names the line interface and configures whether it is enabled along with up to two answer-number strings used for call routing. As a configuration MIB it lets an administrator confirm a BRI leased-line interface is enabled and correctly provisioned with its expected answer numbers. It is deployed on Ascend/Lucent ISDN access equipment terminating BRI leased-line circuits. Engineers can download the ASCEND-MIBBRILT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBBRILT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend Communications (Lucent) MAX/Pipeline ISDN access equipment

Monitoring Examples

An administrator checks bRILtProfile-LineInterface-Enabled and the associated answer-number fields for a BRI leased-line profile to confirm it is active and correctly provisioned before troubleshooting an incoming-call routing issue.

What Can Be Monitored

BRI leased-line interface enable state and answer numbers

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibbRILtProfile	1.3.6.1.4.1.529.23.27
mibbRILtProfileTable	1.3.6.1.4.1.529.23.27.1		not-accessible	A list of mibbRILtProfile profile entries.
mibbRILtProfileEntry	1.3.6.1.4.1.529.23.27.1.1		not-accessible	A mibbRILtProfile entry containing objects that maps to the parameters of mibbRILtProfile profile.
INT bRILtProfile_Shelf_o	1.3.6.1.4.1.529.23.27.1.1.1	INTEGER	read-only
INT bRILtProfile_Slot_o	1.3.6.1.4.1.529.23.27.1.1.2	INTEGER	read-only
INT bRILtProfile_Item_o	1.3.6.1.4.1.529.23.27.1.1.3	INTEGER	read-only
INT bRILtProfile_ProfileNumber	1.3.6.1.4.1.529.23.27.1.1.4	INTEGER	read-write	If it is a stored profile, the number of the profile (1..MAX_NETWORK_PROFILES). If it is the current profile, the number of the stored profile from which it was loaded, or zero if it has never been loaded.
STR bRILtProfile_Name	1.3.6.1.4.1.529.23.27.1.1.5	DisplayString	read-write	The null terminated ascii string that the user gave to this particular profile.
INT bRILtProfile_LineInterface_Enabled	1.3.6.1.4.1.529.23.27.1.1.6	INTEGER	read-write	Boolean that is TRUE if this interface is part of the set used for this network set, or FALSE otherwise.
STR bRILtProfile_LineInterface_AnswerNumber1	1.3.6.1.4.1.529.23.27.1.1.7	DisplayString	read-write	Phone numbers to match when routing by incoming phone number.
STR bRILtProfile_LineInterface_AnswerNumber2	1.3.6.1.4.1.529.23.27.1.1.8	DisplayString	read-write	Phone numbers to match when routing by incoming phone number.
INT bRILtProfile_LineInterface_ClockSource	1.3.6.1.4.1.529.23.27.1.1.9	INTEGER	read-write	Boolean that is TRUE if this interface can be used as the netclock source.
INT bRILtProfile_LineInterface_IdslBandwidth	1.3.6.1.4.1.529.23.27.1.1.10	INTEGER	read-write	Configure IDSL subscriber bandwidth available.
INT bRILtProfile_LineInterface_Gr303Crv	1.3.6.1.4.1.529.23.27.1.1.11	INTEGER	read-write	GR-303 CRV associated with this line
INT bRILtProfile_LineInterface_Gr303InterfaceGroup	1.3.6.1.4.1.529.23.27.1.1.12	INTEGER	read-write	GR-303 interface group associated with this line
INT bRILtProfile_PhysicalAddress_Shelf	1.3.6.1.4.1.529.23.27.1.1.13	INTEGER	read-write	The number of the shelf that the addressed physical device resides on.
INT bRILtProfile_PhysicalAddress_Slot	1.3.6.1.4.1.529.23.27.1.1.14	INTEGER	read-write	The number of the slot that the addressed physical device resides on.
INT bRILtProfile_PhysicalAddress_ItemNumber	1.3.6.1.4.1.529.23.27.1.1.15	INTEGER	read-write	A number that specifies an addressable entity within the context of shelf and slot.
INT bRILtProfile_SwitchType	1.3.6.1.4.1.529.23.27.1.1.16	INTEGER	read-write	Switch type to be emulated.
INT bRILtProfile_Action_o	1.3.6.1.4.1.529.23.27.1.1.17	INTEGER	read-write
INT bRILtProfile_LineInterface_IgnoreLineup	1.3.6.1.4.1.529.23.27.1.1.18	INTEGER	read-write	Ignore line up value for this port.
INT bRILtProfile_SparingMode	1.3.6.1.4.1.529.23.27.1.1.19	INTEGER	read-write	Port sparing operational mode for this port.
mibbRILtProfile_LineInterface_ChannelConfigTable	1.3.6.1.4.1.529.23.27.2		not-accessible	A list of mibbRILtProfile__line_interface__channel_config profile entries.
mibbRILtProfile_LineInterface_ChannelConfigEntry	1.3.6.1.4.1.529.23.27.2.1		not-accessible	A mibbRILtProfile__line_interface__channel_config entry containing objects that maps to the parameters of mibbRILtProfile__line_interface__channel_config profile.
INT bRILtProfile_LineInterface_ChannelConfig_Shelf_o	1.3.6.1.4.1.529.23.27.2.1.1	INTEGER	read-only
INT bRILtProfile_LineInterface_ChannelConfig_Slot_o	1.3.6.1.4.1.529.23.27.2.1.2	INTEGER	read-only
INT bRILtProfile_LineInterface_ChannelConfig_Item_o	1.3.6.1.4.1.529.23.27.2.1.3	INTEGER	read-only
INT bRILtProfile_LineInterface_ChannelConfig_Index_o	1.3.6.1.4.1.529.23.27.2.1.4	INTEGER	read-only
INT bRILtProfile_LineInterface_ChannelConfig_ChannelUsage	1.3.6.1.4.1.529.23.27.2.1.5	INTEGER	read-write	Usage of the b-channel.
INT bRILtProfile_LineInterface_ChannelConfig_NailedGroup	1.3.6.1.4.1.529.23.27.2.1.6	INTEGER	read-write	A number that identifies the set of channels that makes up a nailed group.

RFC description

BRILT (Broadband ISDN Remote In-service Line Test) profile configuration for Ascend communications equipment.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBBRILT-MIB

What Is ASCEND-MIBBRILT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description