HH3C-POSA-MIB

All MIBs › HH3C-POSA-MIB

Organization: Hangzhou H3C Technologies. Co., Ltd.

Last Updated: 2014-05-29

Category: Domain: WAN, Network Interfaces, Vendor: H3C/HH3C

Description: HH3C MIB for POS-Append (POSA) interface extensions providing additional management for POS interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-POSA-MIB?

HH3C-POSA-MIB is an H3C (Hangzhou H3C Technologies) vendor-specific MIB — note that despite the acronym possibly suggesting Packet-over-SONET extensions, the MIB's own description and object model make clear POSA here means Point Of Sale Access, a router feature for relaying retail point-of-sale terminal traffic to application (payment processing) servers, not a SONET/POS interface extension. It models POS application servers in hh3cPosaAppTable (host IP/port, connection mode, keepalive settings, and Hh3cPeerState connection status) and POS terminals in hh3cPosaTerminalTable (access type fcm/flow/tcp, transaction application binding, and Hh3cPeerState), with hh3cPosaMapTable mapping source/destination transaction codes to specific application servers. It exposes extensive traffic counters (hh3cPosaAppRecvPkts/SendPkts/ErrPkts, hh3cPosaTerminalRecvPkts/SendPkts, and per-caller-ID statistics) and FCM (Fast Connection Modem) interface statistics (hh3cPosaFcmStatTimeoutCnts, ConnectFailCnts), plus NOTIFICATION-TYPEs for server/terminal state changes and connection-threshold exceedance. A Hh3cPeerState stuck at down/blocked or a rising hh3cPosaAppDistributeErrCnts count would indicate POS terminals cannot reach their application server, and it depends on the router's FCM/serial/TCP interfaces being configured for the POS access feature, which is why HH3C-POSA-MIB MIB engineers must confirm this application meaning rather than assume a POS-interface (SONET) context.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-POSA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C routers supporting the POS (Point Of Sale) Access feature for retail terminal-to-application-server relay

Monitoring Examples

An operator polls hh3cPosaAppState for a configured application server ID in hh3cPosaAppTable and watches hh3cPosaAppDistributeErrCnts in hh3cPosaAppStatTable; a Hh3cPeerState of blocked combined with a climbing distribute-error count would indicate POS terminals are sending transactions that cannot be routed to the (unreachable) application server.

What Can Be Monitored

POS application server connection state and configuration
POS terminal connection state and access type (fcm/flow/tcp)
application-mapping table entries (source/destination code to app ID)
per-application and per-terminal packet counters
FCM interface timeout/connect-failure statistics
TCP/FCM connection count thresholds

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cPosaFcmStatTimeoutCnts OID:

Select an H3C router (Point-Of-Sale Access terminal-to-application-server relay) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cPosaFcmStatTimeoutCnts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of disconnections because of trade timeouts. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cPosa	1.3.6.1.4.1.25506.2.92			This MIB is to provide the definition of the POSA (Point Of Sale Access) system.
hh3cPosaControl	1.3.6.1.4.1.25506.2.92.1
INT hh3cPosaServerEnable	1.3.6.1.4.1.25506.2.92.1.1	INTEGER	read-write	This attribute controls the starting or stoppage of POS access function. The defalut value is disabled(1).
I32 hh3cPosaFcmAnswerTimeout	1.3.6.1.4.1.25506.2.92.1.2	Integer32	read-write	The maximum answer time of a POS connection through a FCM (Fast Connection Modem) interface. The answer time is the interval from the POS terminal sending request to the Router giving its reply, in units of milliseconds.
I32 hh3cPosaFcmTradeTimeout	1.3.6.1.4.1.25506.2.92.1.3	Integer32	read-write	The maximum time of a POS trade through a FCM interface, in units of milliseconds.
I32 hh3cPosaFcmIdleTimeout	1.3.6.1.4.1.25506.2.92.1.4	Integer32	read-write	The maximum idle time of a POS connection through the FCM interface, in units of seconds.
T/F hh3cPosaSrvStateChangeTrapEnable	1.3.6.1.4.1.25506.2.92.1.5	TruthValue	read-write	This attribute controls whether the hh3cPosaServerStatusChange trap will be sent or not.
T/F hh3cPosaAppStateChangeTrapEnable	1.3.6.1.4.1.25506.2.92.1.6	TruthValue	read-write	This attribute controls whether the hh3cPosaAppStateChange trap will be sent or not.
T/F hh3cPosaTerminalHangUpTrapEnable	1.3.6.1.4.1.25506.2.92.1.7	TruthValue	read-write	This attribute controls whether the hh3cPosaTerminalHangUp trap will be sent or not.
T/F hh3cPosaFcmLnkNegoFailTrapEnable	1.3.6.1.4.1.25506.2.92.1.8	TruthValue	read-write	This attribute controls whether the hh3cPosaFcmLinkNegoFailed trap will be sent or not.
T/F hh3cPosaFcmPhyNegoFailTrapEnable	1.3.6.1.4.1.25506.2.92.1.9	TruthValue	read-write	This attribute controls whether the hh3cPosaFcmPhyNegoFailed trap will be sent or not.
I32 hh3cPosaTcpConnectionNumber	1.3.6.1.4.1.25506.2.92.1.10	Integer32	read-only	The current number of TCP connections.
I32 hh3cPosaFcmConnectionNumber	1.3.6.1.4.1.25506.2.92.1.11	Integer32	read-only	The current number of FCM connections.
I32 hh3cPosaTcpConnectionThreshold	1.3.6.1.4.1.25506.2.92.1.12	Integer32	read-write	The threshold of TCP connections.
I32 hh3cPosaFcmConnectionThreshold	1.3.6.1.4.1.25506.2.92.1.13	Integer32	read-write	The threshold of FCM connections.
T/F hh3cPosaTcpConnectionTrapEnable	1.3.6.1.4.1.25506.2.92.1.14	TruthValue	read-write	This attribute specifies the threshold that must be exceeded to send the hh3cPosaTcpConnectionExceed trap.
T/F hh3cPosaFcmConnectionTrapEnable	1.3.6.1.4.1.25506.2.92.1.15	TruthValue	read-write	This attribute specifies the threshold that must be exceeded to send the hh3cPosaFcmConnectionExceed trap.
I32 hh3cPosaTcpTradeLimit	1.3.6.1.4.1.25506.2.92.1.16	Integer32	read-write	The limit of concurrent trades in one TCP connection. The value 0 means unlimited.
T/F hh3cPosaTcpTradeTrapEnable	1.3.6.1.4.1.25506.2.92.1.17	TruthValue	read-write	This attribute specifies the limit that must be exceeded to send the hh3cPosaTcpTradeExceed trap.
I32 hh3cPosaTcpTradeTimeout	1.3.6.1.4.1.25506.2.92.1.18	Integer32	read-write	The maximum interval to wait for the reply from sending the trade packet to the application server. The value 0 means wait forever.
hh3cPosaTables	1.3.6.1.4.1.25506.2.92.2
hh3cPosaAppTable	1.3.6.1.4.1.25506.2.92.2.1		not-accessible	This table shows the configuration information and running status of POS application.
hh3cPosaAppEntry	1.3.6.1.4.1.25506.2.92.2.1.1		not-accessible	This table shows the configuration information and running status of POS application.
I32 hh3cPosaAppID	1.3.6.1.4.1.25506.2.92.2.1.1.1	Integer32	accessible-for-notify	The identification of a POS application.
HH3 hh3cPosaAppServiceType	1.3.6.1.4.1.25506.2.92.2.1.1.2	Hh3cAppServiceType	read-create	The service type of a POS application. It means the way in which the router connects with the application server.
I32 hh3cPosaAppIfIndex	1.3.6.1.4.1.25506.2.92.2.1.1.3	Integer32	read-create	This attribute is the ifindex through which the router connecting with the application server, if the service type of POS application is flow(2). It is invalid if the service type is tcp(1). At preasent, it supports 5 types of interface: FCM, SERIAL, ASYNC, AM (Analog Modem) and AUX.
HH3 hh3cPosaAppMode	1.3.6.1.4.1.25506.2.92.2.1.1.4	Hh3cAppMode	read-create	The work mode of a POS application.
IPt hh3cPosaAppHostIPType	1.3.6.1.4.1.25506.2.92.2.1.1.5	InetAddressType	read-create	The IP address type of the application server. And now it must be IPV4. It is invalid if the service type is flow(2).
IP hh3cPosaAppHostIP	1.3.6.1.4.1.25506.2.92.2.1.1.6	InetAddress	read-create	The IP address of the application server. And now it only supports IPV4. It is invalid if the service type is flow(2).
I32 hh3cPosaAppHostPort	1.3.6.1.4.1.25506.2.92.2.1.1.7	Integer32	read-create	The listening port of the application server. If the information of the application server is not specified, this object will return the value 0. It is invalid if the service type is flow(2).
IPt hh3cPosaAppRouterIPType	1.3.6.1.4.1.25506.2.92.2.1.1.8	InetAddressType	read-create	The source IP address type of the access router. Now it must be ipv4. It is invalid if the service type is flow(2).
IP hh3cPosaAppRouterIP	1.3.6.1.4.1.25506.2.92.2.1.1.9	InetAddress	read-create	The source IP address of access router used in connecting with application server. Now it only supports ipv4. It is invalid if the service type is flow(2).
I32 hh3cPosaAppKeepAliveInterval	1.3.6.1.4.1.25506.2.92.2.1.1.10	Integer32	read-create	The TCP keep alive interval of the connection between the router and the application server. In unit of seconds. The default value is 2 seconds. It is valid only when the service type is tcp(1).
I32 hh3cPosaAppKeepAliveCount	1.3.6.1.4.1.25506.2.92.2.1.1.11	Integer32	read-create	The maximum number of sending TCP keep alive packets. It is valid only when the service type is tcp(1).
I32 hh3cPosaAppConnectTimeout	1.3.6.1.4.1.25506.2.92.2.1.1.12	Integer32	read-create	The maximum interval that the router waits for the reply from application server after sending the request for establishing a TCP connection. It is invalid if the service type is flow(2).
HH3 hh3cPosaAppState	1.3.6.1.4.1.25506.2.92.2.1.1.13	Hh3cPeerState	read-only	The current running state of application server.
ROW hh3cPosaAppRowStatus	1.3.6.1.4.1.25506.2.92.2.1.1.14	RowStatus	read-create	Operation status.
OCT hh3cPosaAppName	1.3.6.1.4.1.25506.2.92.2.1.1.15	OCTET STRING	read-create	The description of a POS application.
T/F hh3cPosaCallerIDTransEnable	1.3.6.1.4.1.25506.2.92.2.1.1.16	TruthValue	read-create	Enable or disable the caller-id transmission function.
HH3 hh3cPosaTpduChangeStrategy	1.3.6.1.4.1.25506.2.92.2.1.1.17	Hh3cTpduChangeStrategy	read-create	Set the strategy to modify the address of the packet from terminals before delivering it to application server.
I32 hh3cPosaBackupAppID	1.3.6.1.4.1.25506.2.92.2.1.1.18	Integer32	read-create	Specify the backup application ID, 0 indicates not using backup application. It is invalid if the service type is flow(2).
I32 hh3cPosaQuietTimeOut	1.3.6.1.4.1.25506.2.92.2.1.1.19	Integer32	read-create	Specify the wait time for re-activating application server. It is invalid if the service type is flow(2).
T/F hh3cPosaAppHello	1.3.6.1.4.1.25506.2.92.2.1.1.20	TruthValue	read-create	Specify the switch of hello packet for the application server.
I32 hh3cPosaAppHelloInterval	1.3.6.1.4.1.25506.2.92.2.1.1.21	Integer32	read-create	Specify the interval time in minute(s) of hello packet.
I32 hh3cPosaAppRouterPort	1.3.6.1.4.1.25506.2.92.2.1.1.22	Integer32	read-create	The source port of access router used in connecting with application server. 0 indicates not to specify the source port. It is valid only if the service type is tcp(1) and mode is normal(1).
hh3cPosaTerminalTable	1.3.6.1.4.1.25506.2.92.2.2		not-accessible	This table shows the configuration information and running status of POS terminal.
hh3cPosaTerminalEntry	1.3.6.1.4.1.25506.2.92.2.2.1		not-accessible	This table shows the configuration information and running status of POS terminal.
I32 hh3cPosaTerminalID	1.3.6.1.4.1.25506.2.92.2.2.1.1	Integer32	accessible-for-notify	The identification of a POS terminal.
HH3 hh3cPosaTerminalAccessType	1.3.6.1.4.1.25506.2.92.2.2.1.2	Hh3cTerminalAccessType	read-create	The access type of a POS terminal.
I32 hh3cPosaTerminalIfIndex	1.3.6.1.4.1.25506.2.92.2.2.1.3	Integer32	read-create	The ifindex of the interface through which connects the POS terminal and the router. It is invalid if the access type is TCP.
I32 hh3cPosaTerminalTransAppID	1.3.6.1.4.1.25506.2.92.2.2.1.4	Integer32	read-create	The identification of the application server to which all the packets from this POS terminal will be sent. If this object is set to 0, the destination application server to which a packet from this POS terminal will be sent is determined by its TPDU (Transport Protocol Data Unit) destination address. It is invalid if the access type is TCP.
I32 hh3cPosaTerminalListenPort	1.3.6.1.4.1.25506.2.92.2.2.1.5	Integer32	read-create	The listening port accepting the connection from POS terminals. It is valid only when the access type is TCP.
HH3 hh3cPosaTerminalState	1.3.6.1.4.1.25506.2.92.2.2.1.6	Hh3cPeerState	read-only	The current running status of a POS terminal.
ROW hh3cPosaTerminalRowStatus	1.3.6.1.4.1.25506.2.92.2.2.1.7	RowStatus	read-create	Operation status.
OCT hh3cPosaTerminalName	1.3.6.1.4.1.25506.2.92.2.2.1.8	OCTET STRING	read-create	The description of a POS terminal.
I32 hh3cPosaTerminalCfgIfIndex	1.3.6.1.4.1.25506.2.92.2.2.1.9	Integer32	read-only	The ifindex of the interface on which the terminal configuration is. If it is a physical interface, its value is equal to that of hh3cPosaTerminalIfIndex.
hh3cPosaMapTable	1.3.6.1.4.1.25506.2.92.2.3		not-accessible	This table describe the application-mapping information.
hh3cPosaMapEntry	1.3.6.1.4.1.25506.2.92.2.3.1		not-accessible	This table describe the application-mapping information.
OCT hh3cPosaMapDestCode	1.3.6.1.4.1.25506.2.92.2.3.1.1	OCTET STRING	not-accessible	The destination code of the mapping item. Generally, the destination code is a 4-character-string. If the destination address in POS packet matches the code, the packet will be deliveried to the corresponding application server. If any code can not be matched, the packet will be deliveried to the default server. A special destination code, 'default', is for default mapping item.
I32 hh3cPosaMapAppID	1.3.6.1.4.1.25506.2.92.2.3.1.2	Integer32	read-create	The identifier of POS application. It is the index of hh3cPosaAppTable.
ROW hh3cPosaMapRowStatus	1.3.6.1.4.1.25506.2.92.2.3.1.3	RowStatus	read-create	Operation status.
OCT hh3cPosaMapSrcCode	1.3.6.1.4.1.25506.2.92.2.3.1.4	OCTET STRING	not-accessible	The source code of the mapping item. Generally, the source code is a 4-character-string. If the source address in POS packet matches the code, the packet will be deliveried to the corresponding application server. If any code can not be matched, the packet will be deliveried to the default server. A special source code, 'default', is for default mapping item.
hh3cPosaFcmStatTable	1.3.6.1.4.1.25506.2.92.2.4		not-accessible	This table shows the statistics information of FCM interface.
hh3cPosaFcmStatEntry	1.3.6.1.4.1.25506.2.92.2.4.1		not-accessible	This table shows the statistics information of FCM interface.
I32 hh3cPosaFcmStatIfIndex	1.3.6.1.4.1.25506.2.92.2.4.1.1	Integer32	not-accessible	The index of FCM interface.
C32 hh3cPosaFcmStatTimeoutCntsEx	1.3.6.1.4.1.25506.2.92.2.4.1.2	Counter32	read-only	The number of disconnections because of trade timeouts.
C32 hh3cPosaFcmStatConnectFailCnts	1.3.6.1.4.1.25506.2.92.2.4.1.3	Counter32	read-only	The number of connection failures because of unsuccessful negotiations.
G32 hh3cPosaFcmStatTransCnts	1.3.6.1.4.1.25506.2.92.2.4.1.4	Gauge32	read-only	The number of all transactions made through the interface.
G32 hh3cPosaFcmStatTransSuccessCnts	1.3.6.1.4.1.25506.2.92.2.4.1.5	Gauge32	read-only	The number of successful transactions made through the interface.
T/F hh3cPosaFcmStatTransCntsClear	1.3.6.1.4.1.25506.2.92.2.4.1.6	TruthValue	read-write	Clear the number of successful transactions and all transactions.
hh3cPosaAppStatTable	1.3.6.1.4.1.25506.2.92.2.5		not-accessible	This table shows the statistics information of application.
hh3cPosaAppStatEntry	1.3.6.1.4.1.25506.2.92.2.5.1		not-accessible	This table shows the statistics information of application.
C32 hh3cPosaAppRecvPkts	1.3.6.1.4.1.25506.2.92.2.5.1.1	Counter32	read-only	The number of packets recieved from the application server.
C32 hh3cPosaAppSendPkts	1.3.6.1.4.1.25506.2.92.2.5.1.2	Counter32	read-only	The number of packets sent to the application server.
C32 hh3cPosaAppErrPkts	1.3.6.1.4.1.25506.2.92.2.5.1.3	Counter32	read-only	The number of inbound packets that contained errors.
C32 hh3cPosaAppDistributeErrCnts	1.3.6.1.4.1.25506.2.92.2.5.1.4	Counter32	read-only	The number of packets that are discarded when no corresponding POS terminal can be found.
C32 hh3cPosaAppInDiscardedPkts	1.3.6.1.4.1.25506.2.92.2.5.1.5	Counter32	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C32 hh3cPosaAppOutDiscardedPkts	1.3.6.1.4.1.25506.2.92.2.5.1.6	Counter32	read-only	The number of outbound packets that are discarded because of link errors between the router and the application server.
hh3cPosaTerminalStatTable	1.3.6.1.4.1.25506.2.92.2.6		not-accessible	This table shows the statistics information of application.
hh3cPosaTerminalStatEntry	1.3.6.1.4.1.25506.2.92.2.6.1		not-accessible	This table shows the statistics information of application.
C32 hh3cPosaTerminalRecvPkts	1.3.6.1.4.1.25506.2.92.2.6.1.1	Counter32	read-only	The number of packets recieved from the POS terminal.
C32 hh3cPosaTerminalSendPkts	1.3.6.1.4.1.25506.2.92.2.6.1.2	Counter32	read-only	The number of packets sent to the POS terminal.
C32 hh3cPosaTerminalErrPkts	1.3.6.1.4.1.25506.2.92.2.6.1.3	Counter32	read-only	The number of inbound packets that contained errors.
C32 hh3cPosaTerminalMapErrCnts	1.3.6.1.4.1.25506.2.92.2.6.1.4	Counter32	read-only	The number of packets that are discarded because of mapping errors.
C32 hh3cPosaTerminalInDiscardedPkts	1.3.6.1.4.1.25506.2.92.2.6.1.5	Counter32	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C32 hh3cPosaTerminalOutDiscardedPkts	1.3.6.1.4.1.25506.2.92.2.6.1.6	Counter32	read-only	The number of outbound packets that are discarded because of link errors between the router and the POS terminal.
hh3cPosaBatchTerminalTable	1.3.6.1.4.1.25506.2.92.2.7		not-accessible	The table of the configuration information relevant to a batch of POS terminals.
hh3cPosaBatchTerminalEntry	1.3.6.1.4.1.25506.2.92.2.7.1		not-accessible	The configuration information relevant to a batch of POS terminals.
I32 hh3cPosaBatchTerminalFirstID	1.3.6.1.4.1.25506.2.92.2.7.1.1	Integer32	read-create	The first ID of the batch of POS terminals.
ROW hh3cPosaBatchTerminalRowStatus	1.3.6.1.4.1.25506.2.92.2.7.1.2	RowStatus	read-create	Operation status.
hh3cPosaTcpTermStatTable	1.3.6.1.4.1.25506.2.92.2.8		not-accessible	This table shows the statistics information of terminal whose access type is tcp.
hh3cPosaTcpTermStatEntry	1.3.6.1.4.1.25506.2.92.2.8.1		not-accessible	This table shows the statistics information of terminal whose access type is tcp.
I32 hh3cPosaTcpTermStatIndex	1.3.6.1.4.1.25506.2.92.2.8.1.1	Integer32	not-accessible	The index of entity.
IPt hh3cPosaTcpTermStatIPType	1.3.6.1.4.1.25506.2.92.2.8.1.2	InetAddressType	read-create	The type of Internet address. And now it must be ipv4.
IP hh3cPosaTcpTermStatIP	1.3.6.1.4.1.25506.2.92.2.8.1.3	InetAddress	read-create	The IP address or the subnet of the statistics terminal(s). When the vlaue is a subnet, the statistics of all the terminals in the subnet will be added up. And now it only supports ipv4.
IP hh3cPosaTcpTermStatIPMask	1.3.6.1.4.1.25506.2.92.2.8.1.4	InetAddress	read-create	The mask associated with the IP address or the subnet. And now it only supports ipv4.
C64 hh3cPosaTcpTermRecvPkts	1.3.6.1.4.1.25506.2.92.2.8.1.5	Counter64	read-only	The number of packets recieved from the POS terminal(s).
C64 hh3cPosaTcpTermSendPkts	1.3.6.1.4.1.25506.2.92.2.8.1.6	Counter64	read-only	The number of packets sent to the POS terminal(s).
C64 hh3cPosaTcpTermErrPkts	1.3.6.1.4.1.25506.2.92.2.8.1.7	Counter64	read-only	The number of inbound packets that contained errors.
C64 hh3cPosaTcpTermMapErrCnts	1.3.6.1.4.1.25506.2.92.2.8.1.8	Counter64	read-only	The number of packets that are discarded because of mapping errors.
C64 hh3cPosaTcpTermInDiscardedPkts	1.3.6.1.4.1.25506.2.92.2.8.1.9	Counter64	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C64 hh3cPosaTcpTermOutDiscardedPkts	1.3.6.1.4.1.25506.2.92.2.8.1.10	Counter64	read-only	The number of outbound packets that are discarded because of link errors between the router and the POS terminal(s).
ROW hh3cPosaTcpTermStatRowStatus	1.3.6.1.4.1.25506.2.92.2.8.1.11	RowStatus	read-create	Operation status.
hh3cPosaFcmConfTable	1.3.6.1.4.1.25506.2.92.2.9		not-accessible	This table shows the configuration information of FCM (Fast Connection Modem) interfaces.
hh3cPosaFcmConfEntry	1.3.6.1.4.1.25506.2.92.2.9.1		not-accessible	This entry shows the configuration information of FCM (Fast Connection Modem) interfaces.
I32 hh3cPosaFcmNegoHookOff	1.3.6.1.4.1.25506.2.92.2.9.1.1	Integer32	read-write	Delay time for hookoff.
I32 hh3cPosaFcmNegoSilence	1.3.6.1.4.1.25506.2.92.2.9.1.2	Integer32	read-write	Silence time for modem negotiation.
I32 hh3cPosaFcmNegoScrmbBinary1	1.3.6.1.4.1.25506.2.92.2.9.1.3	Integer32	read-write	Scramble-binary1 time for modem negotiation.
I32 hh3cPosaFcmNegoUnscrmbBinary1	1.3.6.1.4.1.25506.2.92.2.9.1.4	Integer32	read-write	Unscramble-binary1 time for modem negotiation.
I32 hh3cPosaFcmThresholdRlsdOff	1.3.6.1.4.1.25506.2.92.2.9.1.5	Integer32	read-write	RLSD (Received Line Signal Detect) off threshold for modem.
I32 hh3cPosaFcmThresholdRlsdOn	1.3.6.1.4.1.25506.2.92.2.9.1.6	Integer32	read-write	RLSD (Received Line Signal Detect) on threshold for modem.
I32 hh3cPosaFcmThresholdTxPower	1.3.6.1.4.1.25506.2.92.2.9.1.7	Integer32	read-write	TX power for modem.
I32 hh3cPosaFcmThresholdAnswerTone	1.3.6.1.4.1.25506.2.92.2.9.1.8	Integer32	read-write	Answer tone level for modem.
hh3cPosaCallerStatTable	1.3.6.1.4.1.25506.2.92.2.10		not-accessible	This table shows the statistics information of terminal according the caller-ID.
hh3cPosaCallerStatEntry	1.3.6.1.4.1.25506.2.92.2.10.1		not-accessible	This table shows the statistics information of terminal according the caller-ID.
OCT hh3cPosaCallerStatCallerID	1.3.6.1.4.1.25506.2.92.2.10.1.1	OCTET STRING	not-accessible	The caller number.
C64 hh3cPosaCallerRecvPkts	1.3.6.1.4.1.25506.2.92.2.10.1.2	Counter64	read-only	The number of packets recieved from the POS terminal(s).
C64 hh3cPosaCallerSendPkts	1.3.6.1.4.1.25506.2.92.2.10.1.3	Counter64	read-only	The number of packets sent to the POS terminal(s).
C64 hh3cPosaCallerErrPkts	1.3.6.1.4.1.25506.2.92.2.10.1.4	Counter64	read-only	The number of inbound packets that contained errors.
C64 hh3cPosaCallerMapErrCnts	1.3.6.1.4.1.25506.2.92.2.10.1.5	Counter64	read-only	The number of packets that are discarded because of mapping errors.
C64 hh3cPosaCallerInDiscardedPkts	1.3.6.1.4.1.25506.2.92.2.10.1.6	Counter64	read-only	The number of inbound packets that are discarded when the incoming buffer is full.
C64 hh3cPosaCallerOutDiscardedPkts	1.3.6.1.4.1.25506.2.92.2.10.1.7	Counter64	read-only	The number of outbound packets that are discarded because of link errors between the router and the POS terminal(s).
ROW hh3cPosaCallerStatRowStatus	1.3.6.1.4.1.25506.2.92.2.10.1.8	RowStatus	read-create	Operation status.
hh3cPosaTrap	1.3.6.1.4.1.25506.2.92.3
hh3cPosaTrapPrex	1.3.6.1.4.1.25506.2.92.3.0
NTF hh3cPosaServerStatusChange	1.3.6.1.4.1.25506.2.92.3.0.1			This trap is generated when the POS function is started or stopped.
NTF hh3cPosaAppStateChange	1.3.6.1.4.1.25506.2.92.3.0.2			This trap is generated whenever the availability of application server changes.
NTF hh3cPosaTerminalHangUp	1.3.6.1.4.1.25506.2.92.3.0.3			This trap is generated whenever the POS connection through a FCM (Fast Connection Modem) interface is hanged up by POS terminal.
NTF hh3cPosaFcmLinkNegoFailed	1.3.6.1.4.1.25506.2.92.3.0.4			This trap is generated whenever the link layer negotiation is failed between the POS terminal and router through a FCM (Fast Connection Modem) interface.
NTF hh3cPosaFcmPhyNegoFailed	1.3.6.1.4.1.25506.2.92.3.0.5			This trap is generated whenever the physical layer negotiation is failed between the POS terminal and router through a FCM (Fast Connection Modem) interface.
NTF hh3cPosaTcpConnectionExceed	1.3.6.1.4.1.25506.2.92.3.0.6			This trap is generated whenever the number of connections exceeds the threshold.
NTF hh3cPosaFcmConnectionExceed	1.3.6.1.4.1.25506.2.92.3.0.7			This trap is generated whenever the number of connections exceeds the threshold.
NTF hh3cPosaTcpTradeExceed	1.3.6.1.4.1.25506.2.92.3.0.8			This trap is generated whenever the number of trades in any TCP connect exceeds the limit.
hh3cPosaTrapObjects	1.3.6.1.4.1.25506.2.92.3.1
INT hh3cPosaAppStateChangeObject	1.3.6.1.4.1.25506.2.92.3.1.1	INTEGER	accessible-for-notify	This is a dummy MIB object referenced by the hh3cPosaAppStateChange trap. This object shows the availability changing of corresponding application server.

RFC description

Point of Sale Access (POSA) system for terminal and application management.

Start monitoring H3C router (Point-Of-Sale Access terminal-to-application-server relay) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-POSA-MIB