ASCEND-MIBATMP-MIB

All MIBs › ASCEND-MIBATMP-MIB

Category: Mobile IP, Vendor: Ascend/Lucent

Description: Manages ATM-based tunneling protocol configuration and session tracking on Ascend equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ASCEND-MIBATMP-MIB?

ASCEND-MIBATMP-MIB is an Ascend Communications (later Lucent) proprietary MIB configuring ATMP (Ascend Tunnel Management Protocol) profiles used for mobile-IP-style tunneling on Ascend access equipment. Its profile table, keyed by index, records agent mode/type, UDP port, home-agent password, SAP-reply setting, retry timeout/limit, idle timer, MTU limit, force-fragmentation flag, SNMP-trap enable, and an action field. As a configuration MIB it lets an administrator confirm an ATMP tunnel profile's agent role and timeout settings. It is deployed on Ascend Communications (Lucent) access equipment. Engineers can download the ASCEND-MIBATMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ASCEND-MIBATMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ascend Communications (Lucent) access equipment

Monitoring Examples

An administrator checks atmpProfile-AgentMode and atmpProfile-RetryTimeout to confirm ATMP tunnel profile configuration on Ascend Communications (Lucent) access equipment.

What Can Be Monitored

ATMP tunnel profile configuration

Imported Objects

From ASCEND-MIB

configuration

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
mibatmpProfile	1.3.6.1.4.1.529.23.42
mibatmpProfileTable	1.3.6.1.4.1.529.23.42.1		not-accessible	A list of mibatmpProfile profile entries.
mibatmpProfileEntry	1.3.6.1.4.1.529.23.42.1.1		not-accessible	A mibatmpProfile entry containing objects that maps to the parameters of mibatmpProfile profile.
INT atmpProfile_Index_o	1.3.6.1.4.1.529.23.42.1.1.1	INTEGER	read-only
INT atmpProfile_AgentMode	1.3.6.1.4.1.529.23.42.1.1.2	INTEGER	read-write	The valid modes for this ATMP agent.
INT atmpProfile_AgentType	1.3.6.1.4.1.529.23.42.1.1.3	INTEGER	read-write	The type of Home Agent.
INT atmpProfile_UdpPort	1.3.6.1.4.1.529.23.42.1.1.4	INTEGER	read-write	UDP port number to use locally.
STR atmpProfile_HomeAgentPassword	1.3.6.1.4.1.529.23.42.1.1.5	DisplayString	read-write	The password required to access this home agent.
INT atmpProfile_AtmpSapReply	1.3.6.1.4.1.529.23.42.1.1.6	INTEGER	read-write	Whether an ATMP Home Agent should reply to IPX SAP Nearest Server queries from the Mobile Client.
INT atmpProfile_RetryTimeout	1.3.6.1.4.1.529.23.42.1.1.7	INTEGER	read-write	The number of seconds between retries to establish a tunnel.
INT atmpProfile_RetryLimit	1.3.6.1.4.1.529.23.42.1.1.8	INTEGER	read-write	The maximum number of failed attempts to establish a tunnel before switching to the alternate home agent.
INT atmpProfile_IdleTimer	1.3.6.1.4.1.529.23.42.1.1.9	INTEGER	read-write	The number of minutes of no activity before an ATMP Home Agent will drop a tunnel. The value 0 disables the idle timer.
INT atmpProfile_MtuLimit	1.3.6.1.4.1.529.23.42.1.1.10	INTEGER	read-write	The maximum IP packet size that can be transmitted to a remote agent without performing pre-fragmentation. The value 0 disables this feature. If enabled, the smallest size the system will use is 68, even if a smaller size is specified. This is to comply with the minimum IP packet size requirement per RFC 791.
INT atmpProfile_ForceFragmentation	1.3.6.1.4.1.529.23.42.1.1.11	INTEGER	read-write	When set to NO, an ICMP message will be sent if a frame needs fragmentation and the DF bit is set. This is the standard behavior. When set to YES, it forces pre-fragmentation of large IP frames before they are sent to the remote agent, even if the frame has the DF bit set. This behavior is not standard and prevents MTU discovery mechanisms.
INT atmpProfile_AtmpSnmpTrap	1.3.6.1.4.1.529.23.42.1.1.12	INTEGER	read-write	When set to No, do not send ATMP SNMP traps. If Yes, send traps. The default is No.
INT atmpProfile_Action_o	1.3.6.1.4.1.529.23.42.1.1.13	INTEGER	read-write

RFC description

Ascend Communications legacy telecom equipment vendor-specific MIB for modem and access platform management.

Start monitoring Ascend Communications (Lucent) MAX/Pipeline/TNT WAN access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ASCEND-MIBATMP-MIB

What Is ASCEND-MIBATMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description