All MIBs › APPIAN-PPORT-DS3-MIB
Organization: Appian Communications, Inc.
Last Updated: 2000-03-19
Category: Optical and WDM, Vendor: Appian
Description: Appian Communications physical DS3 port configuration and performance monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is APPIAN-PPORT-DS3-MIB?
APPIAN-PPORT-DS3-MIB is a vendor-specific MIB from Appian Communications describing physical DS3 (T3) port interfaces and their configuration/performance objects on Appian OSAP2k platforms, explicitly scoped per-chassis (not shared between OSAP units). Although the sample data available here shows only the traps object, the module's stated purpose covers DS3 line configuration and performance monitoring typical of T-carrier interface MIBs (e.g., line coding, framing, and error-second counters). Its monitoring emphasis is hardware/interface status — DS3 physical-layer health such as loss-of-signal, AIS, and line-code violations, surfaced via acDs3Traps when a fault condition occurs on a port. It parallels the structure of the standard DS3/E3 MIB (RFC 3896) conventions common to T-carrier management, though as an Appian-proprietary module it is not a direct extension of it. It is deployed on Appian OSAP2k carrier access platforms terminating DS3 circuits for enterprise or carrier transport. Engineers can download the APPIAN-PPORT-DS3-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in APPIAN-PPORT-DS3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Appian Communications OSAP2k platform
Monitoring Examples
An administrator would primarily rely on acDs3Traps to be notified asynchronously of a DS3 port fault such as loss of signal, alarm indication signal, or excessive line errors, since that is the only object confirmed present in this MIB's sample. Given the module's stated coverage of DS3 configuration and performance, an operator would also expect to poll per-port line-coding and error-count objects (not shown here) to trend degrading DS3 circuit quality before it triggers a trap. This combination of proactive polling and trap-driven alerts is standard practice for monitoring leased DS3 transport health.
What Can Be Monitored
- DS3 port fault/alarm traps
- DS3 line signal status
This MIB depends on
Related MIBs
Imported Objects
From APPIAN-CHASSIS-MIB
| acChassisCurrentTime | OBJECT-TYPE |
| acChassisRingId | OBJECT-TYPE |
From APPIAN-SMI-MIB
| AcAdminStatus | |
| AcNodeId | |
| AcOpStatus | |
| AcPortNumber | |
| AcSlotNumber | |
| acPport | OBJECT-IDENTITY |
From PerfHist-TC-MIB
| PerfIntervalCount |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| TimeStamp | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| acDs3 | 1.3.6.1.4.1.2785.2.3.5 | The is the MIB module that describes DS3 interfaces and objects for Appian Communications OSAP2k platforms. The tables in this DS3 mib are NOT SHARED between OSAPs. | ||
| NTF acDs3CfgErrorTrap | 1.3.6.1.4.1.2785.2.3.5.0.3 | A configuration request to the Ds3 configuration table for an interface has been detected as invalid or corrupt. | ||
| ACA acDs3ConfigAdminStatus | 1.3.6.1.4.1.2785.2.3.5.1.1.4 | AcAdminStatus | read-create | Appian Administrative Status attribute used to set the provisioning state as either activate(1), inactivate(2) or delete(3). Refer to the Appian-SMI.mib file for additional information. |
| INT acDs3ConfigChannelization | 1.3.6.1.4.1.2785.2.3.5.1.1.30 | INTEGER | read-create | Indicates whether this ds3/e3 is channelized or unchannelized. The value of enabledDs1 indicates that this is a DS3 channelized into DS1s. The value of enabledDs3 indicated that this is a DS3 channelized into DS2s. |
| STR acDs3ConfigCircuitIdentifier | 1.3.6.1.4.1.2785.2.3.5.1.1.18 | DisplayString | read-create | This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. |
| INT acDs3ConfigDs1ForRemoteLoop | 1.3.6.1.4.1.2785.2.3.5.1.1.31 | INTEGER | read-create | Indicates which ds1/e1 on this ds3/e3 will be indicated in the remote ds1 loopback request. A value of 0 means no DS1 will be looped. A value of 29 means all ds1s/e1s will be looped. |
| acDs3ConfigEntry | 1.3.6.1.4.1.2785.2.3.5.1.1 | not-accessible | An entry in the Appian DS3 Configuration table. | |
| STR acDs3ConfigFarEndEquipCode | 1.3.6.1.4.1.2785.2.3.5.1.1.32 | DisplayString | read-only | This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message (C-bits) from the remote end. |
| STR acDs3ConfigFarEndFacilityIDCode | 1.3.6.1.4.1.2785.2.3.5.1.1.36 | DisplayString | read-only | This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message (C-bits) from the remote end. |
| STR acDs3ConfigFarEndFrameIDCode | 1.3.6.1.4.1.2785.2.3.5.1.1.34 | DisplayString | read-only | This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path Identification Message (C-bits) from the remote end. |
| STR acDs3ConfigFarEndLocationIDCode | 1.3.6.1.4.1.2785.2.3.5.1.1.33 | DisplayString | read-only | This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message (C-bits) from the remote end. |
| STR acDs3ConfigFarEndUnitCode | 1.3.6.1.4.1.2785.2.3.5.1.1.35 | DisplayString | read-only | This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message (C-bits) from the remote end. |
| STR acDs3ConfigInterfaceName | 1.3.6.1.4.1.2785.2.3.5.1.1.37 | DisplayString | read-create | A user configurable interface name which uniquely identifies this physical interface. The name can be up to 64 bytes in length. |
| INT acDs3ConfigInvalidDays | 1.3.6.1.4.1.2785.2.3.5.1.1.23 | INTEGER | read-only | The number of days in the range from 0 to acDs3ConfigValidDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations). |
| INT acDs3ConfigInvalidFarEndDays | 1.3.6.1.4.1.2785.2.3.5.1.1.25 | INTEGER | read-only | The number of days in the range from 0 to acDs3ConfigValidFarEndDays for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations). |
| INT acDs3ConfigInvalidFarEndIntervals | 1.3.6.1.4.1.2785.2.3.5.1.1.24 | INTEGER | read-only | The number of intervals in the range from 0 to acDs3ConfigValidFarEndIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations). |
| INT acDs3ConfigInvalidIntervals | 1.3.6.1.4.1.2785.2.3.5.1.1.22 | INTEGER | read-only | The number of intervals in the range from 0 to acDs3ConfigValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations). |
| INT acDs3ConfigLineCoding | 1.3.6.1.4.1.2785.2.3.5.1.1.16 | INTEGER | read-create | This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. ds3B3ZS and e3HDB3 refer to the use of specified patterns of normal bits and bipolar violations which are used to replace sequences of zero bits of a specified length. |
| INT acDs3ConfigLineLength | 1.3.6.1.4.1.2785.2.3.5.1.1.26 | INTEGER | read-create | The length of the ds3 line in meters. This object provides information for line build out circuitry if it exists and can use this object to adjust the line build out. |
| INT acDs3ConfigLineStatus | 1.3.6.1.4.1.2785.2.3.5.1.1.20 | INTEGER | read-only | This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The ds3LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see acDs3LoopbackConfig object for the type of loopback) simultaneously. The ds3NoAlarm must be set if and only if no other flag is set. If the ds3loopbackState bit is set, the loopback in effect can be determined from the ds3loopbackConfig object. The various bit positions are: 1 ds3NoAlarm No alarm present 2 ds3RcvRAIFailure Receiving Yellow/Remote Alarm Indication 4 ds3XmitRAIAlarm Transmitting Yellow/Remote Alarm Indication 8 ds3RcvAIS Receiving AIS failure state 16 ds3XmitAIS Transmitting AIS 32 ds3LOF Receiving LOF failure state 64 ds3LOS Receiving LOS failure state 128 ds3LoopbackState Looping the received signal 256 ds3RcvTestCode Receiving a Test Pattern 512 ds3OtherFailure any line status not defined here 1024 ds3UnavailSigState Near End in Unavailable Signal State 2048 ds3NetEquipOOS Carrier Equipment Out of Service |
| INT acDs3ConfigLineStatusChangeTrapEnable | 1.3.6.1.4.1.2785.2.3.5.1.1.28 | INTEGER | read-create | Indicates whether acDs3ConfigLineStatusChange traps should be generated for this interface. |
| TIM acDs3ConfigLineStatusLastChange | 1.3.6.1.4.1.2785.2.3.5.1.1.27 | TimeStamp | read-only | The value of MIB II's sysUpTime object at the time this DS3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value. |
| INT acDs3ConfigLineType | 1.3.6.1.4.1.2785.2.3.5.1.1.15 | INTEGER | read-create | This variable indicates the variety of DS3 C-bit application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps. The ds3ClearChannel value means that the C-bits are not used except for sending/ receiving AIS. The values, in sequence, describe: TITLE: SPECIFICATION: ds3M23 ANSI T1.107-1988 [9] ds3SYNTRAN ANSI T1.107-1988 [9] ds3CbitParity ANSI T1.107a-1990 [9a] ds3ClearChannel ANSI T1.102-1987 [8] |
| INT acDs3ConfigLoopbackConfig | 1.3.6.1.4.1.2785.2.3.5.1.1.19 | INTEGER | read-create | This variable represents the desired loopback configuration of the DS3 interface. The values mean: ds3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. ds3PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for retransmission after it has passed through the device's framing function. ds3LineLoop The received signal at this interface does not go through the device (minimum penetration) but is looped back out. ds3OtherLoop Loopbacks that are not defined here. ds3InwardLoop The sent signal at this interface is looped back through the device. |
| INT acDs3ConfigLoopbackStatus | 1.3.6.1.4.1.2785.2.3.5.1.1.29 | INTEGER | read-only | This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The acDs3ConfigLoopbackStatus is a bit map represented as a sum, therefore is can represent multiple loopbacks simultaneously. The various bit positions are: 1 ds3NoLoopback 2 ds3NearEndPayloadLoopback 4 ds3NearEndLineLoopback 8 ds3NearEndOtherLoopback 16 ds3NearEndInwardLoopback 32 ds3FarEndPayloadLoopback 64 ds3FarEndLineLoopback |
| ACN acDs3ConfigNodeId | 1.3.6.1.4.1.2785.2.3.5.1.1.1 | AcNodeId | accessible-for-notify | The node id is the id for this specific node in the OSAP ring. |
| ACO acDs3ConfigOpStatus | 1.3.6.1.4.1.2785.2.3.5.1.1.5 | AcOpStatus | read-create | The operational or actual state of this DS3. |
| ACP acDs3ConfigPort | 1.3.6.1.4.1.2785.2.3.5.1.1.3 | AcPortNumber | accessible-for-notify | The physical port number for the port. |
| INT acDs3ConfigSendCode | 1.3.6.1.4.1.2785.2.3.5.1.1.17 | INTEGER | read-create | This variable indicates what type of code is being sent across the DS3 interface by the device. Setting this variable causes the interface to begin sending the code requested. The values mean: ds3SendNoCode sending looped or normal data ds3SendLineCode sending a request for a line loopback ds3SendPayloadCode sending a request for a payload loopback (i.e., all DS1/E1s in a DS3 frame) ds3SendResetCode sending a loopback deactivation request ds3SendTestPattern sending a test pattern. |
| ACS acDs3ConfigSlot | 1.3.6.1.4.1.2785.2.3.5.1.1.2 | AcSlotNumber | accessible-for-notify | The physical slot number for the port. |
| acDs3ConfigTable | 1.3.6.1.4.1.2785.2.3.5.1 | not-accessible | The Appian DS3 Configuration table. This table is created by EMS/CLI. | |
| INT acDs3ConfigTimeElapsedDay | 1.3.6.1.4.1.2785.2.3.5.1.1.9 | INTEGER | read-only | The number of seconds that have elapsed since the beginning of the near end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value. |
| INT acDs3ConfigTimeElapsedFarEndDay | 1.3.6.1.4.1.2785.2.3.5.1.1.13 | INTEGER | read-only | The number of seconds that have elapsed since the beginning of the far end current day error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current day exceeds the maximum value, the agent will return the maximum value. |
| INT acDs3ConfigTimeElapsedFarEndInterval | 1.3.6.1.4.1.2785.2.3.5.1.1.11 | INTEGER | read-only | The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value. |
| INT acDs3ConfigTimeElapsedInterval | 1.3.6.1.4.1.2785.2.3.5.1.1.7 | INTEGER | read-only | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value. |
| INT acDs3ConfigTransmitClockSource | 1.3.6.1.4.1.2785.2.3.5.1.1.21 | INTEGER | read-create | The source of Transmit Clock. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock source is used or that an external clock is attached to the box containing the interface. throughTiming indicates that transmit clock is derived from the recovered receive clock of another DS3 interface. |
| INT acDs3ConfigType | 1.3.6.1.4.1.2785.2.3.5.1.1.6 | INTEGER | read-only | The field defines the type of DS3 port that this instance configures. The type can be either Access or Network. |
| INT acDs3ConfigValidDays | 1.3.6.1.4.1.2785.2.3.5.1.1.10 | INTEGER | read-only | The number of previous near end intervals for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hour near end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available. |
| INT acDs3ConfigValidFarEndDays | 1.3.6.1.4.1.2785.2.3.5.1.1.14 | INTEGER | read-only | The number of previous far end days for which data was collected. The value will be 30 unless the interface was brought online within the last 30 days, in which case the value will be the number of complete 24 hour far end days since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available. |
| INT acDs3ConfigValidFarEndIntervals | 1.3.6.1.4.1.2785.2.3.5.1.1.12 | INTEGER | read-only | The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since the interface has been online. |
| INT acDs3ConfigValidIntervals | 1.3.6.1.4.1.2785.2.3.5.1.1.8 | INTEGER | read-only | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the interface has been online. In the case where the agent is a proxy, it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available. |
| NUM acDs3DayCCVs | 1.3.6.1.4.1.2785.2.3.5.3.1.14 | PerfIntervalCount | read-only | The number of C-bit Coding Violations. |
| NUM acDs3DayCESs | 1.3.6.1.4.1.2785.2.3.5.3.1.15 | PerfIntervalCount | read-only | The number of C-bit Errored Seconds. |
| NUM acDs3DayCSESs | 1.3.6.1.4.1.2785.2.3.5.3.1.16 | PerfIntervalCount | read-only | The number of C-bit Severely Errored Seconds. |
| acDs3DayEntry | 1.3.6.1.4.1.2785.2.3.5.3.1 | not-accessible | An entry in the Appian DS3 Day table. | |
| NUM acDs3DayLCVs | 1.3.6.1.4.1.2785.2.3.5.3.1.11 | PerfIntervalCount | read-only | The counter associated with the number of Line Coding Violations. |
| NUM acDs3DayLESs | 1.3.6.1.4.1.2785.2.3.5.3.1.13 | PerfIntervalCount | read-only | The number of Line Errored Seconds (BPVs or illegal zero sequences). |
| ACN acDs3DayNodeId | 1.3.6.1.4.1.2785.2.3.5.3.1.1 | AcNodeId | accessible-for-notify | The node id is the id for this specific node in the OSAP ring. |
| INT acDs3DayNumber | 1.3.6.1.4.1.2785.2.3.5.3.1.4 | INTEGER | accessible-for-notify | A number between 1 and 31, where 1 is the current 24 hour day interval in progress, 2 is the most recently completed 24 hour day interval and 31 is the 24 hour day interval completed 29 days prior to interval 2. |
| NUM acDs3DayPCVs | 1.3.6.1.4.1.2785.2.3.5.3.1.12 | PerfIntervalCount | read-only | The counter associated with the number of P-bit Coding Violations. |
| NUM acDs3DayPESs | 1.3.6.1.4.1.2785.2.3.5.3.1.7 | PerfIntervalCount | read-only | The counter associated with the number of P-bit Errored Seconds. |
| ACP acDs3DayPort | 1.3.6.1.4.1.2785.2.3.5.3.1.3 | AcPortNumber | accessible-for-notify | The physical port number for the port. |
| NUM acDs3DayPSESs | 1.3.6.1.4.1.2785.2.3.5.3.1.8 | PerfIntervalCount | read-only | The counter associated with the number of P-bit Severely Errored Seconds. |
| T/F acDs3DayResetStats | 1.3.6.1.4.1.2785.2.3.5.3.1.6 | TruthValue | read-write | This variable allows the data from the day (acDs3DayIndex=1) to be reset. The acDs3DayValidFlag will be set to False after the reset for the current day. This field has no effect on acDs3DayIndex=2..31. This field will always show a value of False when read. |
| NUM acDs3DaySEFSs | 1.3.6.1.4.1.2785.2.3.5.3.1.9 | PerfIntervalCount | read-only | The counter associated with the number of Severely Errored Framing Seconds. |
| ACS acDs3DaySlot | 1.3.6.1.4.1.2785.2.3.5.3.1.2 | AcSlotNumber | accessible-for-notify | The physical slot number for the port. |
| acDs3DayTable | 1.3.6.1.4.1.2785.2.3.5.3 | not-accessible | The Appian DS3 Day Table contains various statistics collected by the DS3 Interface over the previous 30 days of operation as well as over the current day period. The first row in this table (identified by acDs3DayNumber=1) represents the current day statistics. The next 30 rows of this table (represented by acDs3DayNubmer=2..31) represents one of the 24 hour day intervals. This table is created automatically. | |
| NUM acDs3DayUASs | 1.3.6.1.4.1.2785.2.3.5.3.1.10 | PerfIntervalCount | read-only | The counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary. |
| T/F acDs3DayValidStats | 1.3.6.1.4.1.2785.2.3.5.3.1.5 | TruthValue | read-only | This variable indicates if the data for this interval is valid. |
| NTF acDs3ExceededThresholdFEDayCCVsTrap | 1.3.6.1.4.1.2785.2.3.5.0.32 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdFEDayCESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.30 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdFEDayCSESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.31 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdFEDayUASsTrap | 1.3.6.1.4.1.2785.2.3.5.0.33 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdFEIntervalCCVsTrap | 1.3.6.1.4.1.2785.2.3.5.0.28 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdFEIntervalCESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.26 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdFEIntervalCSESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.27 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdFEIntervalUASsTrap | 1.3.6.1.4.1.2785.2.3.5.0.29 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDayCCVsTrap | 1.3.6.1.4.1.2785.2.3.5.0.23 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDayCESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.24 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDayCSESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.25 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDayLCVsTrap | 1.3.6.1.4.1.2785.2.3.5.0.20 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDayLESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.22 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDayPCVsTrap | 1.3.6.1.4.1.2785.2.3.5.0.21 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDayPESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.16 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDayPSESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.17 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDaySEFSsTrap | 1.3.6.1.4.1.2785.2.3.5.0.18 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEDayUASsTrap | 1.3.6.1.4.1.2785.2.3.5.0.19 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalCCVsTrap | 1.3.6.1.4.1.2785.2.3.5.0.13 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalCESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.14 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalCSESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.15 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalLCVsTrap | 1.3.6.1.4.1.2785.2.3.5.0.10 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalLESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.12 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalPCVsTrap | 1.3.6.1.4.1.2785.2.3.5.0.11 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalPESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.6 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalPSESsTrap | 1.3.6.1.4.1.2785.2.3.5.0.7 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalSEFSsTrap | 1.3.6.1.4.1.2785.2.3.5.0.8 | The threshold specified has been exceeded on this interface. | ||
| NTF acDs3ExceededThresholdNEIntervalUASsTrap | 1.3.6.1.4.1.2785.2.3.5.0.9 | The threshold specified has been exceeded on this interface. | ||
| NUM acDs3FarEndDayCCVs | 1.3.6.1.4.1.2785.2.3.5.5.1.9 | PerfIntervalCount | read-only | The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. |
| NUM acDs3FarEndDayCESs | 1.3.6.1.4.1.2785.2.3.5.5.1.7 | PerfIntervalCount | read-only | The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface. In the case where the agent is a proxy and data is not available, return noSuchInstance. |
| NUM acDs3FarEndDayCSESs | 1.3.6.1.4.1.2785.2.3.5.5.1.8 | PerfIntervalCount | read-only | The counter associated with the number of Far End C-bit Severely Errored Seconds. |
| acDs3FarEndDayEntry | 1.3.6.1.4.1.2785.2.3.5.5.1 | not-accessible | An entry in the DS3 Far End Day table. | |
| ACN acDs3FarEndDayNodeId | 1.3.6.1.4.1.2785.2.3.5.5.1.1 | AcNodeId | accessible-for-notify | The node id is the id for this specific node in the OSAP ring. |
| INT acDs3FarEndDayNumber | 1.3.6.1.4.1.2785.2.3.5.5.1.4 | INTEGER | accessible-for-notify | A number between 1 and 31, where 1 is the current 24 hour day interval in progress, 2 is the most recently completed 24 hour day and 31 is the 24 hour day 29 days prior to interval 2. |
| ACP acDs3FarEndDayPort | 1.3.6.1.4.1.2785.2.3.5.5.1.3 | AcPortNumber | accessible-for-notify | The physical port number for the port. |
| T/F acDs3FarEndDayResetStats | 1.3.6.1.4.1.2785.2.3.5.5.1.6 | TruthValue | read-write | This variable allows the data for the current interval (acDs3FarEndDayIndex=1) to be reset. The acDs3FarEndDayValidFlag will be set to False after the reset for the current day. This field has no effect on acDs3FarEndDayIndex 2..31. This field will always show a vluae of false when read. |
| ACS acDs3FarEndDaySlot | 1.3.6.1.4.1.2785.2.3.5.5.1.2 | AcSlotNumber | accessible-for-notify | The physical port number for the port. |
| acDs3FarEndDayTable | 1.3.6.1.4.1.2785.2.3.5.5 | not-accessible | The Appian DS3 Far End Day Table contains various statistics collected by each DS3 Interface over the previous 30 days of operation as well as over the current period. The first row in this table (identified by acDs3FarEndDayNumber=1) represents the current day statistics. The next 30 rows in this table (represented by acDs3FarEndDayNumber=2..31) represents one of the past 24 hour days. This table is created automatically. | |
| NUM acDs3FarEndDayUASs | 1.3.6.1.4.1.2785.2.3.5.5.1.10 | PerfIntervalCount | read-only | The counter associated with the number of Far End unavailable seconds. |
| T/F acDs3FarEndDayValidStats | 1.3.6.1.4.1.2785.2.3.5.5.1.5 | TruthValue | read-only | This variable indicates if the data for this interval is valid. |
| NUM acDs3FarEndIntervalCCVs | 1.3.6.1.4.1.2785.2.3.5.4.1.9 | PerfIntervalCount | read-only | The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. |
| NUM acDs3FarEndIntervalCESs | 1.3.6.1.4.1.2785.2.3.5.4.1.7 | PerfIntervalCount | read-only | The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface. In the case where the agent is a proxy and data is not available, return noSuchInstance. |
| NUM acDs3FarEndIntervalCSESs | 1.3.6.1.4.1.2785.2.3.5.4.1.8 | PerfIntervalCount | read-only | The counter associated with the number of Far End C-bit Severely Errored Seconds. |
| acDs3FarEndIntervalEntry | 1.3.6.1.4.1.2785.2.3.5.4.1 | not-accessible | An entry in the DS3 Far End Interval table. | |
| ACN acDs3FarEndIntervalNodeId | 1.3.6.1.4.1.2785.2.3.5.4.1.1 | AcNodeId | accessible-for-notify | The node id is the id for this specific node in the OSAP ring. |
| INT acDs3FarEndIntervalNumber | 1.3.6.1.4.1.2785.2.3.5.4.1.4 | INTEGER | accessible-for-notify | A number between 1 and 96, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of all completed intervals (2..97). |
| ACP acDs3FarEndIntervalPort | 1.3.6.1.4.1.2785.2.3.5.4.1.3 | AcPortNumber | accessible-for-notify | The physical port number for the port. |
| T/F acDs3FarEndIntervalResetStats | 1.3.6.1.4.1.2785.2.3.5.4.1.6 | TruthValue | read-write | This variable allows the data for the current interval (acDs3FarEndIntervalIndex=1) to be reset. The acSdx3FarEndIntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs3FarEndIntervalIndex 2..98. This field will always show a vluae of false when read. |
| ACS acDs3FarEndIntervalSlot | 1.3.6.1.4.1.2785.2.3.5.4.1.2 | AcSlotNumber | accessible-for-notify | The physical slot number for the port. |
| acDs3FarEndIntervalTable | 1.3.6.1.4.1.2785.2.3.5.4 | not-accessible | The Appian DS3 Far End Interval Table contains various statistics collected by each DS3 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acDs3FarEndIntervalNumber=1) represents the current interval statistics. The next 96 rows in this table (represented by acDs3FarEndIntervalNumber=2..97) represents one of the past 15 minute intervals. The final row (identified by acDs3FarEndIntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically. | |
| NUM acDs3FarEndIntervalUASs | 1.3.6.1.4.1.2785.2.3.5.4.1.10 | PerfIntervalCount | read-only | The counter associated with the number of Far End unavailable seconds. |
| T/F acDs3FarEndIntervalValidStats | 1.3.6.1.4.1.2785.2.3.5.4.1.5 | TruthValue | read-only | This variable indicates if the data for this interval is valid. |
| NUM acDs3IntervalCCVs | 1.3.6.1.4.1.2785.2.3.5.2.1.14 | PerfIntervalCount | read-only | The number of C-bit Coding Violations. |
| NUM acDs3IntervalCESs | 1.3.6.1.4.1.2785.2.3.5.2.1.15 | PerfIntervalCount | read-only | The number of C-bit Errored Seconds. |
| NUM acDs3IntervalCSESs | 1.3.6.1.4.1.2785.2.3.5.2.1.16 | PerfIntervalCount | read-only | The number of C-bit Severely Errored Seconds. |
| acDs3IntervalEntry | 1.3.6.1.4.1.2785.2.3.5.2.1 | not-accessible | An entry in the Appian DS3 Interval table. | |
| NUM acDs3IntervalLCVs | 1.3.6.1.4.1.2785.2.3.5.2.1.11 | PerfIntervalCount | read-only | The counter associated with the number of Line Coding Violations. |
| NUM acDs3IntervalLESs | 1.3.6.1.4.1.2785.2.3.5.2.1.13 | PerfIntervalCount | read-only | The number of Line Errored Seconds (BPVs or illegal zero sequences). |
| ACN acDs3IntervalNodeId | 1.3.6.1.4.1.2785.2.3.5.2.1.1 | AcNodeId | accessible-for-notify | The node id is the id for this specific node in the OSAP ring. |
| INT acDs3IntervalNumber | 1.3.6.1.4.1.2785.2.3.5.2.1.4 | INTEGER | accessible-for-notify | A number between 1 and 98, where 1 is the current 15 minute interval in progress, 2 is the most recently completed 15 minute interval and 97 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 2, and 98 is the total of all the completed intervals (2..97). |
| NUM acDs3IntervalPCVs | 1.3.6.1.4.1.2785.2.3.5.2.1.12 | PerfIntervalCount | read-only | The counter associated with the number of P-bit Coding Violations. |
| NUM acDs3IntervalPESs | 1.3.6.1.4.1.2785.2.3.5.2.1.7 | PerfIntervalCount | read-only | The counter associated with the number of P-bit Errored Seconds. |
| ACP acDs3IntervalPort | 1.3.6.1.4.1.2785.2.3.5.2.1.3 | AcPortNumber | accessible-for-notify | The physical port number for the port. |
| NUM acDs3IntervalPSESs | 1.3.6.1.4.1.2785.2.3.5.2.1.8 | PerfIntervalCount | read-only | The counter associated with the number of P-bit Severely Errored Seconds. |
| T/F acDs3IntervalResetStats | 1.3.6.1.4.1.2785.2.3.5.2.1.6 | TruthValue | read-write | This variable allows the data from the current interval (acDs3IntervalIndex=1) to be reset. The acDs3IntervalValidFlag will be set to False after the reset for the current interval. This field has no effect on acDs3IntervalIndex=2..98. This field will always show a value of False when read. |
| NUM acDs3IntervalSEFSs | 1.3.6.1.4.1.2785.2.3.5.2.1.9 | PerfIntervalCount | read-only | The counter associated with the number of Severely Errored Framing Seconds. |
| ACS acDs3IntervalSlot | 1.3.6.1.4.1.2785.2.3.5.2.1.2 | AcSlotNumber | accessible-for-notify | The physical slot number for the port. |
| acDs3IntervalTable | 1.3.6.1.4.1.2785.2.3.5.2 | not-accessible | The Appian DS3 Interval Table contains various statistics collected by the DS3 Interface over the previous 24 hours of operation as well as over the current period. The past 24 hours are broken into 96 completed 15 minute intervals. The first row in this table (identified by acDs3IntervalNumber=1) represents the current interval statistics. The next 96 rows of this table (represented by acDs3IntervalNubmer=2..97) represents one of the past 15 minute intervals. The final row (identified by acDs3IntervalNumber=98) is the total of all the past intervals (2..97). This table is created automatically. | |
| NUM acDs3IntervalUASs | 1.3.6.1.4.1.2785.2.3.5.2.1.10 | PerfIntervalCount | read-only | The counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary. |
| T/F acDs3IntervalValidStats | 1.3.6.1.4.1.2785.2.3.5.2.1.5 | TruthValue | read-only | This variable indicates if the data for this interval is valid. |
| NTF acDs3LineStatusChange | 1.3.6.1.4.1.2785.2.3.5.0.1 | An acLogcialDs3LineStatusChange trap is sent when the value of an instance acDs3ConfigLineStatus changes. It can be utilized by an NMS to trigger polls. | ||
| NTF acDs3LinkDownTrap | 1.3.6.1.4.1.2785.2.3.5.0.4 | The link for this ds3 interface has obtained sync. | ||
| NTF acDs3LinkUpTrap | 1.3.6.1.4.1.2785.2.3.5.0.5 | The link for this ds3 interface has lost sync. | ||
| NTF acDs3StatsResetTrap | 1.3.6.1.4.1.2785.2.3.5.0.2 | The Ds3 statistics for this interface have been reset to zero (0) which may effect long term trending functions monitoring this interface. | ||
| acDs3ThresholdEntry | 1.3.6.1.4.1.2785.2.3.5.6.1 | not-accessible | An entry in the Appian DS1 Threshold table. | |
| INT acDs3ThresholdFEDayCCVs | 1.3.6.1.4.1.2785.2.3.5.6.1.30 | INTEGER | read-write | The threshold for the far end day counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdFEDayCESs | 1.3.6.1.4.1.2785.2.3.5.6.1.28 | INTEGER | read-write | The threshold for the far end day counter associated with the number of Far End C-bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdFEDayCSESs | 1.3.6.1.4.1.2785.2.3.5.6.1.29 | INTEGER | read-write | The threshold for the far end day counter associated with the number of Far End C-bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdFEDayUASs | 1.3.6.1.4.1.2785.2.3.5.6.1.31 | INTEGER | read-write | The threshold for the far end day counter associated with the number of Far End unavailable seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdFEIntervalCCVs | 1.3.6.1.4.1.2785.2.3.5.6.1.26 | INTEGER | read-write | The threshold for the far end interval counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdFEIntervalCESs | 1.3.6.1.4.1.2785.2.3.5.6.1.24 | INTEGER | read-write | The threshold for the far end interval counter associated with the number of Far End C-bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdFEIntervalCSESs | 1.3.6.1.4.1.2785.2.3.5.6.1.25 | INTEGER | read-write | The threshold for the far end interval counter associated with the number of Far End C-bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdFEIntervalUASs | 1.3.6.1.4.1.2785.2.3.5.6.1.27 | INTEGER | read-write | The threshold for the far end interval counter associated with the number of Far End unavailable seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDayCCVs | 1.3.6.1.4.1.2785.2.3.5.6.1.21 | INTEGER | read-write | The threshold for the near end day number of C-Bit Coding Violations. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDayCESs | 1.3.6.1.4.1.2785.2.3.5.6.1.22 | INTEGER | read-write | The threshold for the near end day number of C-Bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDayCSESs | 1.3.6.1.4.1.2785.2.3.5.6.1.23 | INTEGER | read-write | The threshold for the near end day number of C-Bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDayLCVs | 1.3.6.1.4.1.2785.2.3.5.6.1.18 | INTEGER | read-write | The threshold for the near end day number of Line Coding Violations. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDayLESs | 1.3.6.1.4.1.2785.2.3.5.6.1.20 | INTEGER | read-write | The threshold for the near end day number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDayPCVs | 1.3.6.1.4.1.2785.2.3.5.6.1.19 | INTEGER | read-write | The threshold value for the near end day number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDayPESs | 1.3.6.1.4.1.2785.2.3.5.6.1.14 | INTEGER | read-write | The threshold value for near end day number of P-Bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDayPSESs | 1.3.6.1.4.1.2785.2.3.5.6.1.15 | INTEGER | read-write | The threshold for the near end day number of P-Bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDaySEFSs | 1.3.6.1.4.1.2785.2.3.5.6.1.16 | INTEGER | read-write | The threshold value for the near end day number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEDayUASs | 1.3.6.1.4.1.2785.2.3.5.6.1.17 | INTEGER | read-write | The threshold value for the near end day number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalCCVs | 1.3.6.1.4.1.2785.2.3.5.6.1.11 | INTEGER | read-write | The threshold for the near end interval number of C-Bit Coding Violations. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalCESs | 1.3.6.1.4.1.2785.2.3.5.6.1.12 | INTEGER | read-write | The threshold for the near end interval number of C-Bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalCSESs | 1.3.6.1.4.1.2785.2.3.5.6.1.13 | INTEGER | read-write | The threshold for the near end interval number of C-Bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalLCVs | 1.3.6.1.4.1.2785.2.3.5.6.1.8 | INTEGER | read-write | The threshold for the near end interval number of Line Coding Violations. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalLESs | 1.3.6.1.4.1.2785.2.3.5.6.1.10 | INTEGER | read-write | The threshold value for the near end interval number of Line Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalPCVs | 1.3.6.1.4.1.2785.2.3.5.6.1.9 | INTEGER | read-write | The threshold for the near end interval number of Path Coding Violations. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalPESs | 1.3.6.1.4.1.2785.2.3.5.6.1.4 | INTEGER | read-write | The threshold value for near end interval number of P-Bit Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalPSESs | 1.3.6.1.4.1.2785.2.3.5.6.1.5 | INTEGER | read-write | The threshold value for the near end interval number of P-Bit Severely Errored Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalSEFSs | 1.3.6.1.4.1.2785.2.3.5.6.1.6 | INTEGER | read-write | The threshold for the near end interval number of Severely Errored Framing Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| INT acDs3ThresholdNEIntervalUASs | 1.3.6.1.4.1.2785.2.3.5.6.1.7 | INTEGER | read-write | The threshold for the near end interval number of Unavailable Seconds. A value of 0 disables the threshold mechanism for this attribute. |
| ACN acDs3ThresholdNodeId | 1.3.6.1.4.1.2785.2.3.5.6.1.1 | AcNodeId | accessible-for-notify | The node id is the id for this specific node in the OSAP ring. |
| ACP acDs3ThresholdPort | 1.3.6.1.4.1.2785.2.3.5.6.1.3 | AcPortNumber | accessible-for-notify | The physical port number for the port. |
| ACS acDs3ThresholdSlot | 1.3.6.1.4.1.2785.2.3.5.6.1.2 | AcSlotNumber | accessible-for-notify | The physical slot number for the port. |
| acDs3ThresholdTable | 1.3.6.1.4.1.2785.2.3.5.6 | not-accessible | The Appian DS3 Threshold Table allows the user to configure the threshold values for each of the statistics found in the interval table base on the 15 minute interval on the day. This table is created automatically. | |
| acDs3Traps | 1.3.6.1.4.1.2785.2.3.5.0 |
RFC description
Manages DS3 interfaces and performance metrics on Appian OSAP2k platform hardware.
Start monitoring Appian Communications OSAP SONET/optical access platform (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.