APPACCELERATION-STATUS-MIB

All MIBs › APPACCELERATION-STATUS-MIB

Organization: www.citrix.com

Last Updated: 2013-10-11

Category: Web and Application Servers

Description: Citrix/NetScaler application acceleration operational status and performance statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is APPACCELERATION-STATUS-MIB?

APPACCELERATION-STATUS-MIB is a Citrix Systems vendor-specific MIB (under appAccelerationMgmt) for Citrix's Application Acceleration WAN-optimization appliances - the module itself does not mention NetScaler, so this is Citrix's dedicated acceleration/compression appliance line rather than the NetScaler ADC product referenced in the hint. Its wsStatusMIBScalars group reports overall unit health via wsOperStatus, wsBypass, wsHaState (standalone/primary/secondary), CPU load (wsCpuUsage), uptime, and WAN/LAN traffic volumes and compression ratios (wsWanOutOctets/InOctets, wsSendCompressionRatio, wsCompressionEffectiveBandwidth); wsStatusMIBTables then breaks performance down further with wsActiveAlarmTable (active fault conditions with severity and acknowledgement), wsServiceClassStatsTable (accelerated vs. non-accelerated traffic and bandwidth savings per service class such as HTTP/CIFS), and per-adapter, per-link, per-application, and per-QoS-class statistics tables covering sent/received volume, packets, and QoS-drop counts. Together these expose whether the appliance is actively accelerating and compressing traffic or has fallen into bypass mode, and whether any service class or link is experiencing dropped or degraded throughput. It depends on the standard INET-ADDRESS-MIB for addressing and is deployed inline on WAN links in front of the servers or branch offices whose traffic it accelerates; administrators use APPACCELERATION-STATUS-MIB SNMP monitoring of compression efficiency and bypass/alarm conditions.

IPNetwork Monitor allows you to monitor SNMP objects defined in APPACCELERATION-STATUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Citrix Application Acceleration WAN-optimization appliances

Monitoring Examples

An operator polls wsOperStatus and wsBypass on the appliance, and a transition to bypassTraffic(103) / bypass(2) combined with an active entry in wsActiveAlarmTable would indicate the unit has stopped accelerating traffic due to a fault condition.

What Can Be Monitored

overall operational/bypass/HA state
CPU load and uptime
WAN/LAN traffic volume and compression ratio
active alarm table with severity
per-service-class and per-link acceleration statistics

Imported Objects

From APPACCELERATION-SMI

appAccelerationMgmt	OBJECT-IDENTITY
appAccelerationNotifications	OBJECT-IDENTITY

From APPACCELERATION-TC

AppAccelerationAlarmSeverity
AppAccelerationDescription
AppAccelerationSeqNum
AppAccelerationYesNo

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY

How to Use in IPNetwork Monitor

Example using wsWanOutOctets OID:

Select a Citrix Application Acceleration WAN-optimization appliance (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type wsWanOutOctets into the Find box to locate it in the OID tree, then select it and click OK. It reports the number of accelerated octets transmitted on the WAN side. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in Octets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
appAccelerationStatusMIB	1.3.6.1.4.1.3845.30.4.1			This module defines the status variables that can be retrieved from a Citrix Application Acceleration unit.
wsStatusMIBObjects	1.3.6.1.4.1.3845.30.4.1.1
wsStatusMIBScalars	1.3.6.1.4.1.3845.30.4.1.1.1
INT wsOperStatus	1.3.6.1.4.1.3845.30.4.1.1.1.1	INTEGER	read-only	The current operational state of the unit.
INT wsLoad1Min	1.3.6.1.4.1.3845.30.4.1.1.1.2	INTEGER	read-only	The 1 minute load average that is also available in the Unix TOP or UPTIME commands. It reports the average number of processes ready to be run. The value is computed by taking the load average value and multiplying it by 100, then converting the value to an integer.
INT wsLoad5Min	1.3.6.1.4.1.3845.30.4.1.1.1.3	INTEGER	read-only	The 5 minute load average that is also available in the Unix TOP or UPTIME commands. It reports the average number of processes ready to be run. The value is computed by taking the load average value and multiplying it by 100, then converting the value to an integer.
INT wsLoad15Min	1.3.6.1.4.1.3845.30.4.1.1.1.4	INTEGER	read-only	The 15 minute load average that is also available in the Unix TOP or UPTIME commands. It reports the average number of processes ready to be run. The value is computed by taking the load average value and multiplying it by 100, then converting the value to an integer.
INT wsBypass	1.3.6.1.4.1.3845.30.4.1.1.1.5	INTEGER	read-only	Traffic processing status. This is also available in the GUI Features page.
APP wsLastAlarmSeqNum	1.3.6.1.4.1.3845.30.4.1.1.1.6	AppAccelerationSeqNum	read-only	The value of the alarm sequence number for the last alarm generated as a trap.
INT wsBoostStatus	1.3.6.1.4.1.3845.30.4.1.1.1.7	INTEGER	read-only	The selected boost mode. This is also available in the GUI Bandwidth Management page.
INT wsBandwidthMode	1.3.6.1.4.1.3845.30.4.1.1.1.8	INTEGER	read-only	The selected bandwidth usage. This is also available in the GUI Bandwidth Management page.
INT wsBandwidthLimit	1.3.6.1.4.1.3845.30.4.1.1.1.9	INTEGER	read-only	Send bandwidth limit. This is also available in the GUI Bandwidth Management page.
C64 wsWanOutOctetsEx	1.3.6.1.4.1.3845.30.4.1.1.1.10	Counter64	read-only	Number of accelerated octets transmitted on the WAN side. This is also available in the GUI Usage Graph page.
C64 wsWanInOctets	1.3.6.1.4.1.3845.30.4.1.1.1.11	Counter64	read-only	Number of accelerated octets received on the WAN side. This is also available in the GUI Usage Graph page.
C64 wsLanOutOctets	1.3.6.1.4.1.3845.30.4.1.1.1.12	Counter64	read-only	Number of accelerated octets transmitted on the LAN side. This is also available in the GUI Usage Graph page.
C64 wsLanInOctets	1.3.6.1.4.1.3845.30.4.1.1.1.13	Counter64	read-only	Number of accelerated octets received on the LAN side. This is also available in the GUI Usage Graph page.
INT wsCompressionEffectiveBandwidth	1.3.6.1.4.1.3845.30.4.1.1.1.14	INTEGER	read-only	The equivalent throughput before compression. This is also available in the GUI Compression Status page. This variable may be reset from the above web page.
INT wsSendCompressionRatio	1.3.6.1.4.1.3845.30.4.1.1.1.15	INTEGER	read-only	Average send compression rate per 1000 octets, e.g. 3500 means 3.5 to 1 compression. This is also available in the GUI Compression Status page. This variable may be reset from the above web page.
INT wsReceiveCompressionRatio	1.3.6.1.4.1.3845.30.4.1.1.1.16	INTEGER	read-only	Average receive compression rate per 1000 octets, e.g. 3500 means 3.5 to 1 compression. This is also available in the GUI Compression Status page. This variable may be reset from the above web page.
TIK wsCompressionStatsCollectionTime	1.3.6.1.4.1.3845.30.4.1.1.1.17	TimeTicks	read-only	The number of centiseconds (0.01 seconds) since the start of the compression statistics collection. This is also available in the GUI Compression Status page. This variable may be reset from the above web page.
INT wsAcceleratedConnections	1.3.6.1.4.1.3845.30.4.1.1.1.18	INTEGER	read-only	Number of current accelerated (active + inactive) connections. This is also available in the GUI System Status page.
INT wsNonAcceleratedConnections	1.3.6.1.4.1.3845.30.4.1.1.1.19	INTEGER	read-only	Number of current non-accelerated connections. This is also available in the GUI System Status page.
INT wsHaState	1.3.6.1.4.1.3845.30.4.1.1.1.20	INTEGER	read-only	High availability state of the unit. This is also available in the GUI High Availability page.
IP wsHaVmIp	1.3.6.1.4.1.3845.30.4.1.1.1.21	IpAddress	read-only	Virtual Management IP Address used in HA setup. This is also available in the GUI High Availability page.
IP wsHaSecondaryIp	1.3.6.1.4.1.3845.30.4.1.1.1.22	IpAddress	read-only	When retrieved from the primary unit (in HA configuration), this is the IP Address of the secondary unit. When retrieved from a secondary or standalone unit, this is 0.0.0.0. This is also available in the GUI High Availability page.
IP wsPrimaryIp	1.3.6.1.4.1.3845.30.4.1.1.1.23	IpAddress	read-only	IP Address of the Primary Port, which is for management data.
INT wsCpuUsage	1.3.6.1.4.1.3845.30.4.1.1.1.24	INTEGER	read-only	Averaged percent CPU used by the traffic accelerator in the last minute.
CTR wsConnectedPlugIns	1.3.6.1.4.1.3845.30.4.1.1.1.25	Counter	read-only	Current number of Plug-ins connected to this unit. This is also available in the GUI System Status page.
INT wsMaxPlugIns	1.3.6.1.4.1.3845.30.4.1.1.1.26	INTEGER	read-only	The Maximum number of Plug-ins that are allowed to connect to this unit. This is also available in the GUI System Status page.
TIK wsQosStatsCollectionTime	1.3.6.1.4.1.3845.30.4.1.1.1.27	TimeTicks	read-only	The number of centiseconds (0.01 seconds) since the start of the QoS and ICA statistics collection. This is also available in the GUI QoS Statistics page. This variable may be reset from the above web page.
TIK wsUpTime	1.3.6.1.4.1.3845.30.4.1.1.1.28	TimeTicks	read-only	The time (in hundredths of a second) since the unit was last re-initialized.
STR wsSerialNumber	1.3.6.1.4.1.3845.30.4.1.1.1.29	DisplayString	read-only	Appliance serial number.
C64 wsNonAcceleratedVolume	1.3.6.1.4.1.3845.30.4.1.1.1.30	Counter64	read-only	Total non-accelerated k-bytes received by the unit, on all interfaces.
INT wsActiveConnections	1.3.6.1.4.1.3845.30.4.1.1.1.31	INTEGER	read-only	Number of active accelerated connections. This is also available in the GUI System Status page.
INT wsAccelerationStatus	1.3.6.1.4.1.3845.30.4.1.1.1.32	INTEGER	read-only	Traffic acceleration (flow control and compression) status. This is also available in the GUI Features page.
INT wsTrafficShapingStatus	1.3.6.1.4.1.3845.30.4.1.1.1.33	INTEGER	read-only	Traffic shaping (QoS) status. This is also available in the GUI Features page.
INT wsSystemLoad	1.3.6.1.4.1.3845.30.4.1.1.1.34	INTEGER	read-only	Load indicator, 100 meant overload.
INT wsWanSendRate	1.3.6.1.4.1.3845.30.4.1.1.1.35	INTEGER	read-only	The average WAN side send rate in the last minute.
INT wsWanReceiveRate	1.3.6.1.4.1.3845.30.4.1.1.1.36	INTEGER	read-only	The average WAN side receive rate in the last minute.
INT wsLanSendRate	1.3.6.1.4.1.3845.30.4.1.1.1.37	INTEGER	read-only	The average LAN side send rate in the last minute.
INT wsLanReceiveRate	1.3.6.1.4.1.3845.30.4.1.1.1.38	INTEGER	read-only	The average LAN side receive rate in the last minute.
INT wsNonAcceleratedRate	1.3.6.1.4.1.3845.30.4.1.1.1.39	INTEGER	read-only	The average non-accelerated traffic rate in the last minute.
STR wsModelNumber	1.3.6.1.4.1.3845.30.4.1.1.1.40	DisplayString	read-only	Appliance model number.
INT wsWccpStatus	1.3.6.1.4.1.3845.30.4.1.1.1.41	INTEGER	read-only	WCCP status. This is also available in the GUI Features page.
wsStatusMIBTables	1.3.6.1.4.1.3845.30.4.1.1.2
wsActiveAlarmTable	1.3.6.1.4.1.3845.30.4.1.1.2.1		not-accessible	A list of the active alarm entries. This represents the fault conditions that are still active in the unit.
activeAlarmEntry	1.3.6.1.4.1.3845.30.4.1.1.2.1.1		not-accessible	The active alarm entries that are still valid system faults. RFC2578 (SMIv2) requires this to be not-accessible.
I32 wsActiveAlarmIndex	1.3.6.1.4.1.3845.30.4.1.1.2.1.1.1	Integer32	read-only	An index that uniquely identifies an entry in the active alarm table.
APP wsActiveAlarmSeqNum	1.3.6.1.4.1.3845.30.4.1.1.2.1.1.2	AppAccelerationSeqNum	read-only	The active alarm's sequence number at the time it was generated.
OID wsActiveAlarmID	1.3.6.1.4.1.3845.30.4.1.1.2.1.1.3	OBJECT IDENTIFIER	read-only	The OID identifying the actual trap that was generated.
APP wsActiveAlarmSeverity	1.3.6.1.4.1.3845.30.4.1.1.2.1.1.4	AppAccelerationAlarmSeverity	read-only	The alarm severity for the active alarm.
TIK wsActiveAlarmLogTime	1.3.6.1.4.1.3845.30.4.1.1.2.1.1.5	TimeTicks	read-only	The value of sysUpTime when the alarm was generated.
APP wsActiveAlarmDesc	1.3.6.1.4.1.3845.30.4.1.1.2.1.1.6	AppAccelerationDescription	read-only	A description for the active alarm.
APP wsActiveAlarmAcked	1.3.6.1.4.1.3845.30.4.1.1.2.1.1.7	AppAccelerationYesNo	read-write	Identifies if the user has acknowledged the alarm.
APP wsActiveAlarmServiceAffect	1.3.6.1.4.1.3845.30.4.1.1.2.1.1.8	AppAccelerationYesNo	read-only	Identifies if the alarm is service affecting.
wsServiceClassStatsTable	1.3.6.1.4.1.3845.30.4.1.1.2.2		not-accessible	A list of service class statistics entries. This contains the performance statistics separated by service classes.
wsServiceClassStatsEntry	1.3.6.1.4.1.3845.30.4.1.1.2.2.1		not-accessible	Each service class entry contains the performance statistics for one service class.
INT wsServiceClassIndex	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.1	INTEGER	read-only	This is used as an index that uniquely identifies a service class in the service class statistics table.
STR wsServiceClassName	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.2	DisplayString	read-only	Name of the service class, e.g. HTTP, FTP, SMTP, CIFS, etc. The list of service classes monitored is defined in the GUI Configure Settings: Service Class page.
INT wsScsCurrentAcceleratedConnections	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.3	INTEGER	read-only	Current number of accelerated connections for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is reset only on system restart.
C64 wsScsTotalAcceleratedConnections	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.4	Counter64	read-only	Total number of accelerated connections for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is reset only on system restart.
C64 wsScsTotalAcceleratedOctets	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.5	Counter64	read-only	Total number of accelerated octets for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is reset only on system restart.
C64 wsScsTotalNonAcceleratedConnections	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.6	Counter64	read-only	Total number of non-accelerated connections for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is reset only on system restart.
C64 wsScsTotalNonAcceleratedOctets	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.7	Counter64	read-only	Total number of non-accelerated octets for the service class. This is also available in the GUI Service Class Statistics Detail page. This counter is reset only on system restart.
C64 wsScsTotalPreCompressionOctets	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.8	Counter64	read-only	Total number of accelerated octets for the service class before compression.
C64 wsScsCompressSentOctets	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.9	Counter64	read-only	Number of accelerated octets sent for the service class after compression.
C64 wsScsCompressReceivedOctets	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.10	Counter64	read-only	Number of accelerated octets received for the service class after compression.
C64 wsScsPreCompressSentOctets	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.11	Counter64	read-only	Number of accelerated octets sent for the service class before compression.
C64 wsScsPreCompressReceivedOctets	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.12	Counter64	read-only	Number of accelerated octets received for the service class before compression.
INT wsScsSendBWSavings	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.13	INTEGER	read-only	WAN-side send bandwidth savings. 100% meant very high (above 99.5:1) compression. 0% meant no compression savings. The formula is (Pre-compress-send-bytes - Compressed-send-bytes) / Pre-compress-send-bytes * 100%
INT wsScsRecvBWSavings	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.14	INTEGER	read-only	WAN-side receive bandwidth savings. 100% meant very high (above 99.5:1) compression. 0% meant no compression savings. The formula is (Pre-compress-received-bytes - Compressed-received-bytes) / Pre-compress-received-bytes * 100%
INT wsScsSendRecvBWSavings	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.15	INTEGER	read-only	Combined send and receive bandwidth savings. The formula is (Pre-compress-bytes - Compressed-bytes) / Pre-compress-bytes * 100%
INT wsScsSendCompressionRatio	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.16	INTEGER	read-only	WAN-side send compression ratio per 1000 octets, e.g. 3500 means 3.5 to 1 compression.
INT wsScsRecvCompressionRatio	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.17	INTEGER	read-only	WAN-side receive compression ratio per 1000 octets, e.g. 3500 means 3.5 to 1 compression.
INT wsScsSendRecvCompressionRatio	1.3.6.1.4.1.3845.30.4.1.1.2.2.1.18	INTEGER	read-only	Combined send and receive compression ratio per 1000 octets, e.g. 3500 means 3.5 to 1 compression.
wsQosTrafficClassStatsTable	1.3.6.1.4.1.3845.30.4.1.1.2.3		not-accessible	A list of QoS traffic class statistics.
wsQosTcStatsEntry	1.3.6.1.4.1.3845.30.4.1.1.2.3.1		not-accessible	Each entry contains performance statistics for one QoS traffic class.
INT wsQosIndex	1.3.6.1.4.1.3845.30.4.1.1.2.3.1.1	INTEGER	read-only	This index uniquely identifies a QoS traffic class in the QoS traffic class statistics table.
STR wsQosName	1.3.6.1.4.1.3845.30.4.1.1.2.3.1.2	DisplayString	read-only	Name of the QoS traffic class, which is defined in the GUI Configure Settings: QoS page.
INT wsQosConfiguredSendRatio	1.3.6.1.4.1.3845.30.4.1.1.2.3.1.3	INTEGER	read-only	The minimum share of the bandwidth configured for this traffic class. This is also available in the GUI QoS Statistics page.
C64 wsQosSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.3.1.4	Counter64	read-only	The total volume of QoS traffic sent for this queue, measured in 1000-octets. This counter may be reset from the GUI QoS Statistics page. The wsQosStatsCollectionTime variable indicates when the counter was reset.
INT wsQosActualSendRatio	1.3.6.1.4.1.3845.30.4.1.1.2.3.1.5	INTEGER	read-only	The bandwidth used by this traffic class. This is calculated using the wsQosSentVolume for the traffic class divided by the sum of wsQosSentVolume of all traffic classes.
wsIcaStatsTable	1.3.6.1.4.1.3845.30.4.1.1.2.4		not-accessible	A list of ICA Traffic Presentation Layer statistics.
wsIcaStatsEntry	1.3.6.1.4.1.3845.30.4.1.1.2.4.1		not-accessible	Each entry contains the performance statistics for one ICA priority.
INT wsIcaIndex	1.3.6.1.4.1.3845.30.4.1.1.2.4.1.1	INTEGER	read-only	This is used as an index that uniquely identifies an ICA service in the ICA Traffic Presentation Layer statistics table.
STR wsIcaServiceName	1.3.6.1.4.1.3845.30.4.1.1.2.4.1.2	DisplayString	read-only	Name of the ICA service, which is also in the GUI QoS Statistics page, Citrix ICA Traffic Presentation Layer Statistics section.
INT wsIcaPriority	1.3.6.1.4.1.3845.30.4.1.1.2.4.1.3	INTEGER	read-only	The ICA Priorities: high is for realtime traffic, medium is for interactive traffic, low is for bulk transfer traffic, background is for the lowest priority traffic. This is no longer applicable starting from release 6.0.
C64 wsIcaSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.4.1.4	Counter64	read-only	The total volume of traffic sent for this ICA applications measured in 1000-octets. This counter may be reset from the GUI QoS Statistics page.
INT wsIcaSentRatio	1.3.6.1.4.1.3845.30.4.1.1.2.4.1.5	INTEGER	read-only	The sent volume as a percent share of the different ICA applications.
C64 wsIcaReceivedVolume	1.3.6.1.4.1.3845.30.4.1.1.2.4.1.6	Counter64	read-only	The total volume of traffic received for this ICA application, measured in 1000-octets. This counter may be reset from the GUI QoS Statistics page.
INT wsIcaReceivedRatio	1.3.6.1.4.1.3845.30.4.1.1.2.4.1.7	INTEGER	read-only	The received volume as a percent share of the different priority of the service. This counter may be reset from the GUI QoS Statistics page.
INT wsIcaSendRate	1.3.6.1.4.1.3845.30.4.1.1.2.4.1.8	INTEGER	read-only	The last minute send rate of this ICA application.
INT wsIcaReceiveRate	1.3.6.1.4.1.3845.30.4.1.1.2.4.1.9	INTEGER	read-only	The last minute receive rate of this ICA application.
wsAdapterTable	1.3.6.1.4.1.3845.30.4.1.1.2.5		not-accessible	A list of adapters configured for the unit. It is also in the GUI IP Address page.
wsAdapterEntry	1.3.6.1.4.1.3845.30.4.1.1.2.5.1		not-accessible	Each entry contains performance statistics for one ADAPTER.
INT wsAdapterIndex	1.3.6.1.4.1.3845.30.4.1.1.2.5.1.1	INTEGER	read-only	This is used as an index that uniquely identifies an adapter.
STR wsAdapterName	1.3.6.1.4.1.3845.30.4.1.1.2.5.1.2	DisplayString	read-only	Adapter name.
INT wsAdapterEnabled	1.3.6.1.4.1.3845.30.4.1.1.2.5.1.3	INTEGER	read-only	Adapter state.
IP wsAdapterIp	1.3.6.1.4.1.3845.30.4.1.1.2.5.1.4	IpAddress	read-only	Adapter IP address.
IP wsAdapterNetmask	1.3.6.1.4.1.3845.30.4.1.1.2.5.1.5	IpAddress	read-only	Adapter network mask.
IP wsAdapterGateway	1.3.6.1.4.1.3845.30.4.1.1.2.5.1.6	IpAddress	read-only	Adapter gateway.
IP wsAdapterVirtualIp	1.3.6.1.4.1.3845.30.4.1.1.2.5.1.7	IpAddress	read-only	HA virtual IP address.
INT wsAdapterVLanEnabled	1.3.6.1.4.1.3845.30.4.1.1.2.5.1.8	INTEGER	read-only	VLAN state.
INT wsAdapterVLanGroup	1.3.6.1.4.1.3845.30.4.1.1.2.5.1.9	INTEGER	read-only	VLAN group ID.
wsLinkStatsTable	1.3.6.1.4.1.3845.30.4.1.1.2.6		not-accessible	A list of link statistics.
linkStatsEntry	1.3.6.1.4.1.3845.30.4.1.1.2.6.1		not-accessible	Each entry contains the performance statistics for one link.
INT linkIndex	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.1	INTEGER	read-only	This index uniquely identifies a link in the link statistics table.
STR linkName	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.2	DisplayString	read-only	Name of the link.
C64 linkSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.3	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 linkReceivedVolume	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.4	Counter64	read-only	The total volume of traffic received on the link, measured in 1000-octets.
C64 linkSentPackets	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.5	Counter64	read-only	The total number of packets sent on the link.
C64 linkReceivedPackets	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.6	Counter64	read-only	The total number of packets received on the link. in 1000-octets.
C64 linkDroppedSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.7	Counter64	read-only	The total traffic not sent on the link due to QoS threshold, measured in 1000-octets.
C64 linkDroppedReceivedVolume	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.8	Counter64	read-only	The total received traffic dropped from the link due to QoS threshold, measured in 1000-octets.
C64 linkDroppedSentPackets	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.9	Counter64	read-only	The total number of packets not sent on the link due to QoS threshold.
C64 linkDroppedReceivedPackets	1.3.6.1.4.1.3845.30.4.1.1.2.6.1.10	Counter64	read-only	The total number of received packets dropped from the link due to QoS threshold.
wsAppStatsTable	1.3.6.1.4.1.3845.30.4.1.1.2.7		not-accessible	A list of link statistics.
appStatsEntry	1.3.6.1.4.1.3845.30.4.1.1.2.7.1		not-accessible	Each entry contains the performance statistics for one application on one link.
INT appIndex	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.1	INTEGER	read-only	This index uniquely identifies one application on a link.
STR appName	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.2	DisplayString	read-only	Name of the link.
INT appId	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.3	INTEGER	read-only	Unique ID for application.
INT appParentId	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.4	INTEGER	read-only	Parent application ID.
INT appGroupId	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.5	INTEGER	read-only	Bit mask, indicating the group which this application belong to.
C64 appSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.6	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 appReceivedVolume	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.7	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 appSentPackets	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.8	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 appReceivedPackets	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.9	Counter64	read-only	The total volume of traffic sent on the link, in 1000-octets.
C64 appDroppedSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.10	Counter64	read-only	The total traffic not sent on the link due to QoS threshold, in 1000-octets.
C64 appDroppedReceiveVolume	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.11	Counter64	read-only	The total received traffic dropped from the link due to QoS threshold, in 1000-octets.
C64 appDroppedSentPackets	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.12	Counter64	read-only	The total number of packets not sent on the link due to QoS threshold.
C64 appDroppedReceivedPackets	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.13	Counter64	read-only	The total number of received packets dropped from the link due to QoS threshold.
INT appSendRate	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.14	INTEGER	read-only	The last minute send rate of this application.
INT appReceiveRate	1.3.6.1.4.1.3845.30.4.1.1.2.7.1.15	INTEGER	read-only	The last minute receive rate of this application.
wsQosStatsTable	1.3.6.1.4.1.3845.30.4.1.1.2.8		not-accessible	A list of QoS traffic class statistics.
qosStatsEntry	1.3.6.1.4.1.3845.30.4.1.1.2.8.1		not-accessible	Each entry contains the performance statistics for one QoS traffic class.
INT qosIndex	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.1	INTEGER	read-only	This index uniquely identifies a QoS traffic class in the QoS traffic class statistics table.
STR qosPolicyName	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.2	DisplayString	read-only	Name of the QoS Policy.
STR qosLink	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.3	DisplayString	read-only	Name of the link.
C64 qosSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.4	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 qosReceiveVolume	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.5	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 qosSentPackets	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.6	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 qosReceivedPackets	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.7	Counter64	read-only	The total volume of traffic sent on the link, in 1000-octets.
C64 qosDroppedSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.8	Counter64	read-only	The total traffic not sent on the link due to QoS threshold, in 1000-octets.
C64 qosDroppedReceiveVolume	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.9	Counter64	read-only	The total received traffic dropped from the link due to QoS threshold, in 1000-octets.
C64 qosDroppedSentPackets	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.10	Counter64	read-only	The total number of packets not sent on the link due to QoS threshold.
C64 qosDroppedReceivedPackets	1.3.6.1.4.1.3845.30.4.1.1.2.8.1.11	Counter64	read-only	The total number of received packets dropped from the link due to QoS threshold.
wsLscStatsTable	1.3.6.1.4.1.3845.30.4.1.1.2.9		not-accessible	A list of link level service class statistics.
lscStatsEntry	1.3.6.1.4.1.3845.30.4.1.1.2.9.1		not-accessible	Each entry contains the performance statistics for one link level service class.
INT lscIndex	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.1	INTEGER	read-only	This index is used to identify the link statistics within a service class.
STR lscServiceClassName	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.2	DisplayString	read-only	Name of the service class, e.g. HTTP, FTP, SMTP, CIFS, etc. The list of service classes monitored is defined in the GUI Configure Settings: Service Class page.
STR lscLink	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.3	DisplayString	read-only	Name of the link.
C64 lscSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.4	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 lscReceivedVolume	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.5	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 lscSentPackets	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.6	Counter64	read-only	The total volume of traffic sent on the link, measured in 1000-octets.
C64 lscReceivedPackets	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.7	Counter64	read-only	The total volume of traffic sent on the link, in 1000-octets.
C64 lscDroppedSentVolume	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.8	Counter64	read-only	The total traffic not sent on the link due to QoS threshold, in 1000-octets.
C64 lscDroppedReceiveVolume	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.9	Counter64	read-only	The total received traffic dropped from the link due to QoS threshold, in 1000-octets.
C64 lscDroppedSentPackets	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.10	Counter64	read-only	The total number of packets not sent on the link due to QoS threshold.
C64 lscDroppedReceivedPackets	1.3.6.1.4.1.3845.30.4.1.1.2.9.1.11	Counter64	read-only	The total number of received packets dropped from the link due to QoS threshold.
wsPartnerTable	1.3.6.1.4.1.3845.30.4.1.1.2.10		not-accessible	A list of CloudBridge partners
partnerEntry	1.3.6.1.4.1.3845.30.4.1.1.2.10.1		not-accessible	Each row contains information on one partner unit.
IPt partnerAddrType	1.3.6.1.4.1.3845.30.4.1.1.2.10.1.1	InetAddressType	read-only	Format of partnerAddr, IPv4 or IPv6. See RFC4001 for InetAddressType and InetAddress usage.
IP partnerAddr	1.3.6.1.4.1.3845.30.4.1.1.2.10.1.2	InetAddress	read-only	Partner IP address.
INT partnerConnections	1.3.6.1.4.1.3845.30.4.1.1.2.10.1.3	INTEGER	read-only	Number of accelerated connections to partner.
INT partnerSendRate	1.3.6.1.4.1.3845.30.4.1.1.2.10.1.4	INTEGER	read-only	The last minute send rate to partner.
INT partnerReceiveRate	1.3.6.1.4.1.3845.30.4.1.1.2.10.1.5	INTEGER	read-only	The last minute receive rate from partner.
TIK partnerIdleTime	1.3.6.1.4.1.3845.30.4.1.1.2.10.1.6	TimeTicks	read-only	Time where no traffic flows between this partner.
IP wsHAMasterIpAddr	1.3.6.1.4.1.3845.30.4.1.1.3	IpAddress	accessible-for-notify	The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router.
wsStatusMIBAlertTables	1.3.6.1.4.1.3845.30.4.1.1.4
INT wsAlertAction	1.3.6.1.4.1.3845.30.4.1.1.4.1	INTEGER	read-only	Action of the alert.
INT wsAlertClass	1.3.6.1.4.1.3845.30.4.1.1.4.2	INTEGER	read-only	Class of the alert.
APP wsAlertMsg	1.3.6.1.4.1.3845.30.4.1.1.4.3	AppAccelerationDescription	read-only	Message of the alert.
IP wsSourceIpAddr	1.3.6.1.4.1.3845.30.4.1.1.5	IpAddress	accessible-for-notify	The IP address of the source of Alert.
wsStatusMIBConformance	1.3.6.1.4.1.3845.30.4.1.2
wsStatusMIBCompliances	1.3.6.1.4.1.3845.30.4.1.2.1
wsStatusCompliance	1.3.6.1.4.1.3845.30.4.1.2.1.1			The compliance statement for agents which implement appAccelerationStatusMIB.
wsStatusMIBGroups	1.3.6.1.4.1.3845.30.4.1.2.2
wsStatusGroup	1.3.6.1.4.1.3845.30.4.1.2.2.1			A collection of objects used to retrieve status information
wsStatusTrapGroup	1.3.6.1.4.1.3845.30.4.1.2.2.2			Conformance group for objects contained in VRRP notifications.
wsStatusNotifyGroup	1.3.6.1.4.1.3845.30.4.1.2.2.3			A collection of the Notifications supported in the status MIB.
wsStatusMIBNotifications	1.3.6.1.4.1.3845.30.5.1
NTF wsNotifyStart	1.3.6.1.4.1.3845.30.5.1.1			An indication that the agent has started running.
NTF wsNotifyShutdown	1.3.6.1.4.1.3845.30.5.1.2			An indication that the agent is in the process of being shutdown.
NTF wsNotifyRestart	1.3.6.1.4.1.3845.30.5.1.3			An indication that the agent has been restarted.
NTF wsHANotifyNewMaster	1.3.6.1.4.1.3845.30.5.1.4			The newMaster trap indicates that the sending agent has transitioned to 'Master' state.
NTF wsNotifyAvailBWChange	1.3.6.1.4.1.3845.30.5.1.5			And indication that available BW Has Changed
NTF wsNotifyUnexpectedRestart	1.3.6.1.4.1.3845.30.5.1.6			An indication that the agent has been unexpectedly restarted.
NTF wsNotifyPersistentError	1.3.6.1.4.1.3845.30.5.1.7			The unit is experiencing a persistent internal error.
NTF wsNotifyAlert	1.3.6.1.4.1.3845.30.5.1.8			An alert is generated from the unit.
NTF wsNotifyConfigurationChanged	1.3.6.1.4.1.3845.30.5.1.9			An indication that the configuration has changed.

RFC description

Citrix Application Acceleration status and operational metrics for WAN optimization.

Start monitoring Citrix Application Acceleration WAN-optimization appliances (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download APPACCELERATION-STATUS-MIB