ALCATEL-IND1-SERVICE-MGR-MIB :: alaServiceMgrPortProfile8023adTreatment

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALCATEL-IND1-SERVICE-MGR-MIBalaServiceMgrPortProfile8023adTreatment

alaServiceMgrPortProfile8023adTreatment

Module: ALCATEL-IND1-SERVICE-MGR-MIB

OID (symbolic): ALCATEL-IND1-SERVICE-MGR-MIB::alaServiceMgrPortProfile8023adTreatment

OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.1.1.5

Node type: OBJECT-TYPE

Type: AlaEServiceUNIProfileProtocolTreatment

Access: read-write

Description: This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU frames received on the Access Port. Tunnel (1) enables the PDU to be tunneled across the provider network. Discard (2) causes the PDU of the protocol to be discarded and not enter the provider network. Peer (3) means that on this port the bridge is to participate in the protocol. Currently peer and drop are supported

What is alaServiceMgrPortProfile8023adTreatment?

Configures how IEEE 802.3ad (Link Aggregation Control Protocol, LACP) PDU frames received on a service access port are handled — either tunneled across the provider network or discarded. This determines whether customer link-aggregation protocol traffic traverses the provider domain.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.1.1.5
snmpwalk -v2c -c public <target> ALCATEL-IND1-SERVICE-MGR-MIB::alaServiceMgrPortProfile8023adTreatment

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.1.1.5.1
snmpget -v2c -c public <target> ALCATEL-IND1-SERVICE-MGR-MIB::alaServiceMgrPortProfile8023adTreatment.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.1.1.5.1 s <value>

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-SERVICE-MGR-MIB::alaServiceMgrPortProfile8023adTreatment OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6486alcatelALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801alcatelIND1BaseMIBALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1alcatelIND1ManagementALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2managementIND1SoftwareALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1softwareIND1EntitiesALCATEL-IND1-BASE
1.3.6.1.4.1.6486.801.1.2.1.51softentIND1serviceMgrALCATEL-IND1-BASE
Numeric OIDNameModule
1.3.6.1.4.1.6486.801.1.2.1.51.1alcatelIND1ServiceMgrMIBALCATEL-IND1-SERVICE-MGR-MIB
1.3.6.1.4.1.6486.801.1.2.1.51.1.1alcatelIND1ServiceMgrMIBObjectsALCATEL-IND1-SERVICE-MGR-MIB
1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1alaServiceMgrALCATEL-IND1-SERVICE-MGR-MIB
1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.1alaServiceMgrPortProfileTableALCATEL-IND1-SERVICE-MGR-MIB
1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.1.1alaServiceMgrPortProfileEntryALCATEL-IND1-SERVICE-MGR-MIB
1.3.6.1.4.1.6486.801.1.2.1.51.1.1.1.1.1.5alaServiceMgrPortProfile8023adTreatmentALCATEL-IND1-SERVICE-MGR-MIB