ALCATEL-IND1-ROUTEMAP-MIB

All MIBs › ALCATEL-IND1-ROUTEMAP-MIB

Organization: Alcatel-Lucent

Last Updated: 2007-04-03

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch route map MIB for managing policy-based route manipulation and redistribution match/set clauses.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-ROUTEMAP-MIB?

ALCATEL-IND1-ROUTEMAP-MIB is a proprietary Alcatel (OmniSwitch, IND1 family) enterprise MIB for configuring IP route maps, the policy constructs used to control route redistribution between routing protocols and to apply match/set clauses to routes. It exposes configuration-oriented data: redistribution entries mapping a source routing protocol to a destination protocol via a specific route map, and access-list name associations used within route-map match clauses. This is primarily a configuration/software-policy MIB rather than a hardware-health MIB; its main monitoring value is confirming that intended route-redistribution policies (e.g., OSPF into BGP) are correctly configured and active via row status objects. It has no explicit dependency on other MIBs beyond standard SNMPv2 SMI and IANA address-family types used for alaRouteMapRedistAddressType. It is deployed on Alcatel-Lucent OmniSwitch routers/switches wherever policy-based routing or protocol redistribution is required. Engineers can download the ALCATEL-IND1-ROUTEMAP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-ROUTEMAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent Enterprise (ALE) OmniSwitch switches/routers

Monitoring Examples

An administrator would inspect alaRouteMapRedistProtoTable entries to verify that alaRouteMapRedistSrcProtoId and alaRouteMapRedistDestProtoId pairs match the intended redistribution policy (e.g., static routes into OSPF) and that alaRouteMapRedistStatus/alaRouteMapRedistRowStatus show the entry as active. The alaRouteMapAccessListNameTable can be checked to confirm which access lists are bound to a given route map for match filtering. A route map entry stuck in a non-active row status would explain why expected routes are not being redistributed.

What Can Be Monitored

route redistribution policy status
source-to-destination protocol redistribution mapping
route map row/active status
access list bindings for route map matching

Imported Objects

From ALCATEL-IND1-BASE

routingIND1Iprm

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1RouteMapMIB	1.3.6.1.4.1.6486.801.1.2.1.10.2.3			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of IP Route Maps global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1RouteMapMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1
alaRouteMapConfig	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1
alaRouteMapRedistProtoTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1		not-accessible	Protocol based configuration for route redistribution.
alaRouteMapRedistProtoEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1		not-accessible	Identifies the source protocol and Route Map to be matched for route redistribution. If the route matches one of the source protocols Route Maps, and the Route Map is of type permit, then the route will be redistributed to the destination protocol.
INT alaRouteMapRedistSrcProtoId	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.1	INTEGER	not-accessible	The source protocol of the route to be redistributed.
INT alaRouteMapRedistDestProtoId	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.2	INTEGER	not-accessible	The protocol that a route is distributed into.
U32 alaRouteMapRedistRouteMapIndex	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.3	Unsigned32	not-accessible	Index indicating Route Map to use for redistribution match. In the destroy case the value 0 indicates all route-maps.
INT alaRouteMapRedistStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.4	INTEGER	read-create	Enable or disable the reditribution of routes into the specified protocol.
IPt alaRouteMapRedistAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.5	InetAddressType	read-only	The address family of the source and destination protocols. The set is constrained to ipv4 and ipv6.
ROW alaRouteMapRedistRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.1.1.6	RowStatus	read-create	Controls creation and deletion of Row Status entries.
alaRouteMapAccessListNameTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2		not-accessible	Table containing Access List name to Access List bindings.
alaRouteMapAccessListNameEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1		not-accessible	Each entry binds an Access List Name to an Access List index.
STR alaRouteMapAccessListName	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.1	DisplayString	not-accessible	The name of an Access List.
U32 alaRouteMapAccessListNameIndex	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.2	Unsigned32	read-only	The index associated with the Access List name.
IPt alaRouteMapAccessListNameAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.3	InetAddressType	read-create	The type of address in this Access List. The set is constrained to ipv4 and ipv6.
ROW alaRouteMapAccessListNameRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.2.1.4	RowStatus	read-create	Controls creation and deletion of Row Status entries.
alaRouteMapAccessListTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3		not-accessible	This table contains all Access Lists configured on the switch.
alaRouteMapAccessListEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1		not-accessible	Each entry identifies an IPv4 or IPv6 address or subnet to match for route redistribution.
U32 alaRouteMapAccessListIndex	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.1	Unsigned32	not-accessible	The index associated with the Access List name.
IPt alaRouteMapAccessListAddressType	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.2	InetAddressType	not-accessible	The type of address in this Access List Table Entry. The set is constrained to ipv4 and ipv6.
IP alaRouteMapAccessListAddress	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.3	InetAddress	not-accessible	The IPv4 or IPv6 address associated with this access list entry. The type is identified by alaRouteMapAccessListAddressType.
U32 alaRouteMapAccessListPrefixLength	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.4	Unsigned32	not-accessible	The prefix length in bits of the IPv4 or IPv6 address associated with this Access List entry. The maximum for IPv4 is 32.
ALA alaRouteMapAccessListRedistControl	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.5	AlaRouteMapRedistControl	read-create	Controls how a route is matched and redistributed. allSubnets matches all subnets of the prefix. noSubnets only matches the exact prefix. aggregate matches all subnets of the prefix, but only redistributes the prefix.
ALA alaRouteMapAccessListAction	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.6	AlaRouteMapAction	read-create	Controls whether an address should be redistributed or denied, if an Access list entry is matched.
ROW alaRouteMapAccessListRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.3.1.7	RowStatus	read-create	Controls creation and deletion of Row Status entries.
alaRouteMapNameTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4		not-accessible	Table containing Route Map name to Route Map index bindings.
alaRouteMapNameEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1		not-accessible	Each entry binds a Route Map Name to a Route Map index.
STR alaRouteMapName	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.1	DisplayString	not-accessible	The name of a Route Map.
U32 alaRouteMapNameIndex	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.2	Unsigned32	read-only	The index associated with the Route Map name.
ROW alaRouteMapNameRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.4.1.3	RowStatus	read-create	Controls creation and deletion of Row Status entries.
alaRouteMapSequenceTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5		not-accessible	Table binds a sequence to a Route Map.
alaRouteMapSequenceEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1		not-accessible	Each entry binds a Route Map and a Sequence.
U32 alaRouteMapSequenceIndex	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.1	Unsigned32	not-accessible	A Route Map Index.
U32 alaRouteMapSequenceNumber	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.2	Unsigned32	not-accessible	The Sequence Number indicating the position of sequences with the same Route Map index.
ALA alaRouteMapSequenceAction	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.3	AlaRouteMapAction	read-create	Controls whether a sequence, if matched, should be redistributed or denied.
ROW alaRouteMapSequenceRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.5.1.4	RowStatus	read-create	Controls creation and deletion of Row Status entries.
alaRouteMapTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6		not-accessible	Protocol based configuration for route redistribution.
alaRouteMapEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1		not-accessible	Each entry describes a match or set clause in a Route Map.
U32 alaRouteMapIndex	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.1	Unsigned32	not-accessible	The index associated with the Route Map name.
U32 alaRouteMapSequence	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.2	Unsigned32	not-accessible	Route Maps are linked together using sequence numbers. All Route Maps with the same index and with different sequence numbers are linked together and processed in order of increasing sequence number.
ALA alaRouteMapType	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.3	AlaRouteMapType	not-accessible	The type of match or set command in this entry. Route Map rows with the same Route Map Name, Sequence Number and Match/Set Type form a group. An entry within the group is uniquely identified by this Route Map Table object. Any match within the group is considered a successful match for the entire group, and matching will continue with the next group.
STR alaRouteMapValue	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.4	DisplayString	not-accessible	The string following the match or set keyword in a Route Map CLI command.
ROW alaRouteMapRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.1.1.6.1.5	RowStatus	read-create	Controls creation and deletion of Row Status entries.
alcatelIND1RouteMapMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2
alcatelIND1RouteMapMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.1
alaRouteMapCompliance	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.1.1			The compliance statement for routers running Route Maps and implementing the ALCATEL-IND1-ROUTEMAP MIB.
alcatelIND1RouteMapMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.2
alaRouteMapConfigMIBGroup	1.3.6.1.4.1.6486.801.1.2.1.10.2.3.2.2.1			A collection of objects to support management of global configuration parameters of the Route Map Module.

RFC description

Vendor-private MIB from Alcatel for route mapping and routing policy configuration; manages route redistribution and traffic engineering policies.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-ROUTEMAP-MIB

What Is ALCATEL-IND1-ROUTEMAP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description