All MIBs › ALCATEL-IND1-SAA-MIB
Organization: Alcatel - Architects Of An Internet World
Last Updated: 2009-07-21
Category: Vendor: Alcatel-Lucent
Description: Alcatel OmniSwitch Service Assurance Agent MIB for active performance testing with round-trip delay and jitter probes.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ALCATEL-IND1-SAA-MIB?
ALCATEL-IND1-SAA-MIB is an Alcatel-Lucent OmniSwitch Service Assurance Agent MIB for the Birds Of Prey product line, used to configure and retrieve results from active network performance tests, notably Ethernet OAM (802.1ag/Y.1731-style) probes. It exposes configuration tables for test parameters (target MEP ID/MAC, domain and association names, packet timeout, test mode) as well as results and history tables holding measured performance data. Its monitoring value lies squarely in software-driven performance diagnostics: it lets an administrator track round-trip delay, jitter, and reachability between endpoints as an ongoing health check of the data path, independent of any single device's own hardware. It is built on top of Ethernet CFM/OAM concepts (802.1ag) for defining maintenance domains and endpoints. It is deployed in Alcatel-Lucent switched networks, particularly metro-Ethernet or service-provider access networks, where SLA verification between switches is required. Engineers can download the ALCATEL-IND1-SAA-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-SAA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Alcatel-Lucent OmniSwitch (Birds Of Prey product line)
Monitoring Examples
An operator configures a probe via alaSaaEthoamCtrlTable, setting alaSaaEthoamCtrlTgtMepId/alaSaaEthoamCtrlTgtMAC as the destination and alaSaaEthoamCtrlDomainName/alaSaaEthoamCtrlAssociationName to select the CFM maintenance association, then activates it with alaSaaEthoamCtrlRowStatus. Polling alaSaaEthoamResults and alaSaaEthoamHistory afterward reveals delay/jitter trends and would flag a service-affecting problem if round-trip times spike or timeouts (governed by alaSaaEthoamCtrlPktTimeOut) start occurring. This gives a continuous, per-path performance monitoring capability distinct from simple interface counters.
What Can Be Monitored
- configured OAM probe targets
- round-trip delay results
- jitter history
- probe timeout events
- test row status (active/inactive)
This MIB depends on
Related MIBs
Imported Objects
From ALCATEL-IND1-BASE
| softentIND1Saa | OBJECT-IDENTITY |
From IEEE8021-CFM-MIB
| Dot1agCfmMaintAssocName | |
| Dot1agCfmMaintDomainName |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using alaSaaCtrlRuns OID:
Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alaSaaCtrlRuns into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Indicates number of times SAA test has been executed. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT alaSaaCtrlAdminStatus | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.5 | INTEGER | read-create | Indicates wether to start or stop the SAA test. |
| alaSaaCtrlConfig | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1 | |||
| alaSaaCtrlConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.1 | Collection of objects for management of Saa control Group. | ||
| STR alaSaaCtrlDescr | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.4 | DisplayString | read-create | User provided description string for the SAA. |
| alaSaaCtrlEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1 | not-accessible | An entry in the alaSaaCtrlTable table, containing information on the Saa function for a single instance of the Saa. | |
| C32 alaSaaCtrlFailures | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.8 | Counter32 | read-only | Indicates the number of times this SAA test has failed. |
| I32 alaSaaCtrlInterval | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.11 | Integer32 | read-create | Interval, in minutes, between two iterations of the SAA test. Valid values are 1, 2, 5 and 10-1500. |
| I32 alaSaaCtrlJitterThreshold | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.15 | Integer32 | read-create | Trap is generated when the Jitter Threshold is crossed. 0 indicates it is diabled. |
| INT alaSaaCtrlLastRunResult | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.9 | INTEGER | read-only | The result of the latest SAA test iteration. |
| DAT alaSaaCtrlLastRunTime | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.10 | DateAndTime | read-only | The time at which the last iteration of the SAA was run. |
| I32 alaSaaCtrlMaxHistoryRows | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.14 | Integer32 | read-only | Specifies the maximum number of iterations for which history data is maintained. |
| STR alaSaaCtrlOwnerIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.1 | SnmpAdminString | accessible-for-notify | Owner name to identify the responsiblity of the entries in the table. |
| ROW alaSaaCtrlRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.3 | RowStatus | read-create | This object allows entries to be created and deleted in the table. |
| I32 alaSaaCtrlRTTThreshold | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.16 | Integer32 | read-create | Trap is generated when the RTT Threshold is crossed. 0 indicates it is diabled. |
| C32 alaSaaCtrlRunsEx | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.7 | Counter32 | read-only | Indicates number of times SAA test has been executed. |
| DAT alaSaaCtrlStartAt | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.12 | DateAndTime | read-create | Specifies the time at which the SAA test is to be started. The deci-seconds specified in DateAndTime has no significance in scheduling SAA. The year in DateAndTime must be in the range from 1970 to 2037. |
| DAT alaSaaCtrlStopAt | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.13 | DateAndTime | read-create | Specifies the time at which the SAA test is to be stopped.Special value for DataAndTime which is 9999-12-31,23:59:59.0 is used to reset the existing configured value of this object, indicating that the SAA test should never stop. The deci-seconds in the DateAndTime has no significance in scheduling SAA.The year in DateAndTime must be in the range from 1970 to 2037. |
| alaSaaCtrlTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1 | not-accessible | Defines the SAA control table for providing, via SNMP, the capability of performing SAA test operations. | |
| STR alaSaaCtrlTestIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.2 | SnmpAdminString | accessible-for-notify | Unique name to identify the entries in the table. The name is unique across various SNMP users. |
| INT alaSaaCtrlTestMode | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.1.1.1.6 | INTEGER | read-only | The type of SAA test to be performed. The undefined value corresponds to the case when an entry is created in the alaSaaCtrlTable table without specifying a value for this object. This value shall be updated when the user creates an entry for the corresponding saa in the alaSaaIpCtrlTable table, alaSaaEthoamCtrlTable table or alaSaaMacCtrlTable table. |
| NTF alaSaaEthIterationCompleteTrap | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.2 | A alaSaaEthIterationCompleteTrap notification is sent when a Eth-LB or Eth-DMM SAA iteration is completed. | ||
| NUM alaSaaEthoamCtrlAssociationName | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.9 | Dot1agCfmMaintAssocName | read-create | The name of the association in the domain (specified by alaSaaEthoamCtrlDomainName) to which the source Mep belongs. |
| I32 alaSaaEthoamCtrlAvgJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.22 | Integer32 | read-only | Specifies the average jitter of all the iterations of the SAA. |
| I32 alaSaaEthoamCtrlAvgRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.19 | Integer32 | read-only | Specifies the average round trip time of all the iterations of the SAA. |
| alaSaaEthoamCtrlConfig | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5 | |||
| alaSaaEthoamCtrlConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.5 | Collection of objects for management of Saa Ethoam Configuration Table. | ||
| NUM alaSaaEthoamCtrlDomainName | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.8 | Dot1agCfmMaintDomainName | read-create | The name of the domain to which the source Mep belongs. |
| T/F alaSaaEthoamCtrlDropEligible | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.15 | TruthValue | read-create | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. |
| alaSaaEthoamCtrlEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1 | not-accessible | Defines an entry in the alaSaaEthoamCtrlTable. | |
| I32 alaSaaEthoamCtrlInterPktDelay | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.12 | Integer32 | read-create | Specifies the delay between two consecutive packets transmitted during an iteration. The value specified should be a multiple of 100. |
| I32 alaSaaEthoamCtrlMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.23 | Integer32 | read-only | Specifies the maximum jitter among all the iterations of the SAA. |
| I32 alaSaaEthoamCtrlMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.20 | Integer32 | read-only | Specifies the maximum round trip time among all the iterations of the SAA. |
| I32 alaSaaEthoamCtrlMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.21 | Integer32 | read-only | Specifies the minimum jitter among all the iterations of the SAA. |
| I32 alaSaaEthoamCtrlMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.18 | Integer32 | read-only | Specifies the minimum round trip time among all the iterations of the SAA. |
| I32 alaSaaEthoamCtrlNumPkts | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.11 | Integer32 | read-create | The number of packets to be sent in one iteration of Eth-LB/DMM test.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s. |
| STR alaSaaEthoamCtrlOwnerIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.1 | SnmpAdminString | not-accessible | Owner name to identify the responsiblity of the entries in the table. |
| OCT alaSaaEthoamCtrlPktData | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.13 | OCTET STRING | read-create | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. |
| I32 alaSaaEthoamCtrlPktTimeOut | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.10 | Integer32 | read-only | The maximum time to wait for the reply of the transmitted packet. |
| ROW alaSaaEthoamCtrlRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.3 | RowStatus | read-create | This object allows entries to be created and deleted in the alaSaaEthoamCtrlTable. Deletion of an entry in this table results in all corresponding (same alaSaaEthoamCtrlOwnerIndex and alaSaaEthoamCtrlTestIndex index values) alaSaaEthoamResultsTable and alaSaaEthoamHistoryTable entries being deleted. |
| I32 alaSaaEthoamCtrlSrcMepId | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.7 | Integer32 | read-create | The Mep-Id of the source node initiating the Ethernet Loopback or DMM message. |
| alaSaaEthoamCtrlTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1 | not-accessible | Defines the table for providing, via SNMP, the capability of performing Ethernet Loopback and DMM test operations. The results of these tests are stored in the alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable. | |
| STR alaSaaEthoamCtrlTestIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.2 | SnmpAdminString | not-accessible | Unique name to identify the entries in the table. This name is unique across various SNMP users. |
| INT alaSaaEthoamCtrlTestMode | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.4 | INTEGER | read-create | Specifies the type of Ethernet OAM test defined by this entry. ethernetLoopback - tests connectivity and round trip time by sending loopback requests. ethernetDmm - tests connectivity and round trip time by sending timestamped packets. |
| MAC alaSaaEthoamCtrlTgtMAC | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.6 | MacAddress | read-create | The Target MAC Address of the destination to which the Ethernet Loopback or DMM message is to be sent: A unicast destination MAC address. Either alaSaaEthoamCtrlTgtMepId or alaSaaEthoamCtrlTgtMAC should be specified while configuring an alaSaaEthoamCtrlEntry. |
| I32 alaSaaEthoamCtrlTgtMepId | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.5 | Integer32 | read-create | The Mep-Id of the destination to which the Ethernet Loopback or DMM message is to be sent. Either alaSaaEthoamCtrlTgtMepId or alaSaaEthoamCtrlTgtMAC should be specified while configuring an alaSaaEthoamCtrlEntry. |
| U32 alaSaaEthoamCtrlTotalPktsRcvd | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.16 | Unsigned32 | read-only | Specifies the total number of packets received during all the Eth-LB/DMM iterations. |
| U32 alaSaaEthoamCtrlTotalPktsSent | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.17 | Unsigned32 | read-only | Specifies the total number of packets sent during all the Eth-LB/DMM iterations. |
| DAT alaSaaEthoamCtrlTSMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.27 | DateAndTime | read-only | The timestamp of the iteration that gave the maximum packet jitter. |
| DAT alaSaaEthoamCtrlTSMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.25 | DateAndTime | read-only | The timestamp of the iteration that gave the maximum packet delay. |
| DAT alaSaaEthoamCtrlTSMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.26 | DateAndTime | read-only | The timestamp of the iteration that gave the minimum packet jitter. |
| DAT alaSaaEthoamCtrlTSMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.24 | DateAndTime | read-only | The timestamp of the iteration that gave the minimum packet delay. |
| I32 alaSaaEthoamCtrlVlanPriority | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.5.1.1.14 | Integer32 | read-create | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. |
| alaSaaEthoamHistory | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7 | |||
| alaSaaEthoamHistoryEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1 | not-accessible | ||
| alaSaaEthoamHistoryGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.7 | Collection of objects for management of Saa Ethoam history table. | ||
| U32 alaSaaEthoamHistoryIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1.1 | Unsigned32 | not-accessible | An entry in this table is created when the result of an Eth-LB/DMM iteration is determined. The initial 2 instance identifier index values identify the alaSaaEthoamCtrlEntry that an Eth-LB/DMM iteration result (alaSaaEthoamHistoryEntry) belongs to. The alaSaaEthoamHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored. |
| I32 alaSaaEthoamHistoryPktJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1.3 | Integer32 | read-only | The jitter value for a single packet in an iteration. |
| I32 alaSaaEthoamHistoryPktRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1.1.2 | Integer32 | read-only | The round trip time taken by a single packet in an iteration. |
| alaSaaEthoamHistoryTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.7.1 | not-accessible | Defines a table for storing the results of an Eth-LB/DMM iteration. The number of entries in this table for a configured test are limited by the value of the corresponding alaSaaCtrlMaxHistoryRows object. An entry in this table is created when the result of an Eth-LB/DMM test is determined. An entry is removed from this table when its corresponding alaSaaEthoamCtrlEntry is deleted. The agent removes the oldest entry for a test in the alaSaaEthoamHistoryTable to allow the addition of a new entry for that test once the number of rows in the alaSaaEthoamHistoryTable reaches the value specified by alaSaaCtrlMaxHistoryRows. | |
| alaSaaEthoamResults | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6 | |||
| I32 alaSaaEthoamResultsAvgJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.12 | Integer32 | read-only | The average jitter value. |
| I32 alaSaaEthoamResultsAvgRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.9 | Integer32 | read-only | The average round trip time. |
| alaSaaEthoamResultsEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1 | not-accessible | Defines an entry in the alaSaaEthoamResultsTable. The alaSaaEthoamResultsTable has the same indexing as the alaSaaEthoamCtrlTable in order for a alaSaaEthoamResultsEntry to correspond to the alaSaaEthoamCtrlEntry that caused it to be created. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaEthoamCtrlTable. | |
| alaSaaEthoamResultsGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.6 | Collection of objects for management of Saa Ethoam Results Table. | ||
| I32 alaSaaEthoamResultsInterPktDelay | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.4 | Integer32 | read-only | Specifies the inter-packet-delay with which the packets were sent in the iteration. |
| I32 alaSaaEthoamResultsMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.13 | Integer32 | read-only | The maximum jitter value. |
| I32 alaSaaEthoamResultsMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.10 | Integer32 | read-only | The maximum round trip time. |
| I32 alaSaaEthoamResultsMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.11 | Integer32 | read-only | The minimum jitter value. |
| I32 alaSaaEthoamResultsMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.8 | Integer32 | read-only | The minimum round trip time. |
| U32 alaSaaEthoamResultsPktsRcvd | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.3 | Unsigned32 | read-only | Specifies the number of packets received during a single Eth-LB/DMM iteration |
| U32 alaSaaEthoamResultsPktsSent | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.2 | Unsigned32 | read-only | Specifies the number of packets sent during a single Eth-LB/DMM iteration. |
| INT alaSaaEthoamResultsRunResult | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.5 | INTEGER | read-only | The result of the Eth-LB/DMM iteration. |
| OCT alaSaaEthoamResultsRunResultReason | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.6 | OCTET STRING | read-only | If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'. |
| DAT alaSaaEthoamResultsRunTime | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.7 | DateAndTime | read-only | The date and time at which the iteraton was run. |
| alaSaaEthoamResultsTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1 | not-accessible | Defines the Ethoam Results Table for providing the capability of performing Eth-LB/DMM operations. The results of these operations are stored in the alaSaaEthoamResultsTable and the alaSaaEthoamHistoryTable. An entry is removed from the alaSaaEthoamResultsTable when its corresponding alaSaaCtrlEntry is deleted. | |
| U32 alaSaaEthoamResultsTestRunIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.6.1.1.1 | Unsigned32 | accessible-for-notify | The value of alaSaaEthoamResultsTestRunIndex identifies the row entry that reports results for a single Eth-LB/DMM test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows. |
| I32 alaSaaIpCtrlAvgJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.20 | Integer32 | read-only | Specifies the average jitter of all the iterations of the SAA. |
| I32 alaSaaIpCtrlAvgRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.17 | Integer32 | read-only | Specifies the average round trip time of all the iterations of the SAA. |
| alaSaaIpCtrlConfig | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2 | |||
| alaSaaIpCtrlConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.2 | Collection of objects for management of Saa Ip Configuration Table. | ||
| alaSaaIpCtrlEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1 | not-accessible | Entry for the alaSaaIpCtrl table. | |
| I32 alaSaaIpCtrlInterPktDelay | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.11 | Integer32 | read-create | Specifies the delay between two consecutive packets transmitted during a ping iteration.The value specified should be a multiple of 100. |
| I32 alaSaaIpCtrlMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.21 | Integer32 | read-only | Specifies the maximum jitter among all the iterations of the SAA. |
| I32 alaSaaIpCtrlMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.18 | Integer32 | read-only | Specifies the maximum round trip time among all the iterations of the SAA. |
| I32 alaSaaIpCtrlMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.19 | Integer32 | read-only | Specifies the minimum jitter among all the iterations of the SAA. |
| I32 alaSaaIpCtrlMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.16 | Integer32 | read-only | Specifies the minimum round trip time among all the iterations of the SAA. |
| I32 alaSaaIpCtrlNumPkts | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.10 | Integer32 | read-create | Specifies the number of packets to be sent in one ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s. |
| STR alaSaaIpCtrlOwnerIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.1 | SnmpAdminString | not-accessible | Owner name to identify the responsiblity of the entries in the table. |
| I32 alaSaaIpCtrlPayloadSize | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.9 | Integer32 | read-create | Specifies the size of the ICMP payload to be used for the ping operation. |
| ROW alaSaaIpCtrlRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.3 | RowStatus | read-create | Allows entries to be created and deleted in the table. createAndWait value is not supported for this object. |
| IP alaSaaIpCtrlSrcAddress | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.8 | InetAddress | read-create | Specifies the IP host address to be used as the source for performing a ping operation. The default value of this object is 0.0.0.0 if alaSaaIpCtrlSrcAddrType is set to ipv4. |
| IPt alaSaaIpCtrlSrcAddrType | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.7 | InetAddressType | read-create | Specifies the InetAddress type of host address to be used as the source for performing a ping operation. InetAddressIPv4(1) is the only type currently supported. |
| alaSaaIpCtrlTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1 | not-accessible | It defines the ping Control Table for providing the ping capability via SNMP. The results of these tests are stored in the alaSaaIpResultsTable and alaSaaIpHistoryTable. | |
| STR alaSaaIpCtrlTestIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.2 | SnmpAdminString | not-accessible | Unique name to identify the entries in the table. This name is unique across various SNMP users. |
| INT alaSaaIpCtrlTestMode | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.4 | INTEGER | read-create | Specifies the type of ping test defined by this entry. |
| IP alaSaaIpCtrlTgtAddress | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.6 | InetAddress | read-create | Specifies the IP host address to be used as the destination for performing a ping operation. |
| IPt alaSaaIpCtrlTgtAddrType | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.5 | InetAddressType | read-create | Specifies the InetAddress type of host address to be used as the destination for performing a ping operation. InetAddressIPv4(1) is the only type currently supported. |
| C32 alaSaaIpCtrlTotalPktsRcvd | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.15 | Counter32 | read-only | Specifies the total number of packets received during all the ping iterations. |
| C32 alaSaaIpCtrlTotalPktsSent | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.14 | Counter32 | read-only | Specifies the total number of packets sent during all the ping iterations. |
| DAT alaSaaIpCtrlTSMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.25 | DateAndTime | read-only | Specifies the timestamp of the iteration that gave the maximum packet jitter. |
| DAT alaSaaIpCtrlTSMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.23 | DateAndTime | read-only | Specifies the timestamp of the iteration that gave the maximum packet delay. |
| DAT alaSaaIpCtrlTSMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.24 | DateAndTime | read-only | Specifies the timestamp of the iteration that gave the minimum packet jitter. |
| DAT alaSaaIpCtrlTSMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.22 | DateAndTime | read-only | Specifies the timestamp of the iteration that gave the minimum packet delay. |
| I32 alaSaaIpCtrlTypeOfService | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.12 | Integer32 | read-create | Specifies the type of service |
| I32 alaSaaIpCtrlVRFId | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.2.1.1.13 | Integer32 | read-create | Specifies the VRF ID. Only the value '0' is currently supported. |
| alaSaaIpHistory | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4 | |||
| alaSaaIpHistoryEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1 | not-accessible | Entry of the alaSaaIpHistory table. | |
| alaSaaIpHistoryGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.4 | Collection of objects for management of Saa Ip history table. | ||
| U32 alaSaaIpHistoryIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1.1 | Unsigned32 | not-accessible | An entry in this table is created when the result of a ping iteration is determined. The initial 2 instance identifier index values identify the alaSaaIpPingCtrlEntry that a ping iteration result (alaSaaIpHistoryEntry) belongs to. The alaSaaIpHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored. |
| I32 alaSaaIpHistoryPktJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1.3 | Integer32 | read-only | The jitter value for a single packet in an iteration. |
| I32 alaSaaIpHistoryPktRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1.1.2 | Integer32 | read-only | The round trip time taken by a single packet in an iteration. |
| alaSaaIpHistoryTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.4.1 | not-accessible | It is the table for storing the results of a ping operation. An entry in this table is created when a ping operation is performed. Entries are removed from this table when its corresponding alaSaaCtrlEntry is deleted. | |
| NTF alaSaaIPIterationCompleteTrap | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.1 | A alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration is completed. | ||
| alaSaaIpResults | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3 | |||
| I32 alaSaaIpResultsAvgJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.12 | Integer32 | read-only | Average jitter value. |
| I32 alaSaaIpResultsAvgRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.9 | Integer32 | read-only | The average round trip time. |
| alaSaaIpResultsEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1 | not-accessible | Entry for the alaSaaResults table. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaIpCtrlTable. | |
| alaSaaIpResultsGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.3 | Collection of objects for management of Saa Ip Results Table. | ||
| I32 alaSaaIpResultsInterPktDelay | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.4 | Integer32 | read-only | Specifies the inter-packet-delay with which the packets were sent in the iteration. |
| I32 alaSaaIpResultsMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.13 | Integer32 | read-only | Maximum jitter value |
| I32 alaSaaIpResultsMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.10 | Integer32 | read-only | The maximum round trip time. |
| I32 alaSaaIpResultsMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.11 | Integer32 | read-only | Minumum jitter value. |
| I32 alaSaaIpResultsMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.8 | Integer32 | read-only | The minimum round trip time. |
| C32 alaSaaIpResultsPktsRcvd | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.3 | Counter32 | read-only | Specifies the number of packets received during a single ping iteration. |
| C32 alaSaaIpResultsPktsSent | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.2 | Counter32 | read-only | Specifies the number of packets sent during a single ping iteration. |
| INT alaSaaIpResultsRunResult | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.5 | INTEGER | read-only | The result of the iteration. |
| OCT alaSaaIpResultsRunResultReason | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.6 | OCTET STRING | read-only | If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'. |
| DAT alaSaaIpResultsRunTime | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.7 | DateAndTime | read-only | The date and time at which the iteraton was run. |
| alaSaaIpResultsTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1 | not-accessible | Defines the IP Results Table for providing the capability of performing IP Ping operations. The results of these operations are stored in the alaSaaIpResultsTable and the alaSaaIpHistoryTable. An entry is removed from the alaSaaIpResultsTable when its corresponding alaSaaCtrlEntry is deleted. | |
| U32 alaSaaIpResultsTestRunIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.3.1.1.1 | Unsigned32 | accessible-for-notify | The value of alaSaaIpResultsTestRunIndex identifies the row entry that reports results for a single OAM test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows. |
| NTF alaSaaJitterThresholdRedTrap | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.7 | A alaSaaJitterThresholdTrap notification is sent when the Jitter Threshold is crossed. | ||
| NTF alaSaaJitterThresholdYellowTrap | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.5 | A alaSaaJitterThresholdTrap notification is sent when 90% of the Jitter Threshold is crossed. | ||
| I32 alaSaaMacCtrlAvgJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.19 | Integer32 | read-only | Specifies the average jitter of all the iterations of the SAA. |
| I32 alaSaaMacCtrlAvgRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.16 | Integer32 | read-only | Specifies the average round trip time of all the iterations of the SAA. |
| alaSaaMacCtrlConfig | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8 | |||
| alaSaaMacCtrlConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.8 | Collection of objects for management of Saa MAC-Ping Configuration Table. | ||
| T/F alaSaaMacCtrlDropEligible | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.9 | TruthValue | read-create | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. |
| MAC alaSaaMacCtrlDstAddress | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.4 | MacAddress | read-create | Specifies the mac address to be used as the destination for performing a MAC-Ping operation. |
| alaSaaMacCtrlEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1 | not-accessible | Entry for the alaSaaMacCtrl table. | |
| I32 alaSaaMacCtrlInterPktDelay | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.12 | Integer32 | read-create | Specifies the delay between two consecutive packets transmitted during a MAC-Ping iteration.The value specified should be a multiple of 100. |
| I32 alaSaaMacCtrlIsid | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.7 | Integer32 | read-create | The i-domain Service Indentifier (I-SID) which identifies the service instance in a PBB network on a BEB switch. For a customer packet flowing toward the b-domain, the I-SID is derived from the VFI and inserted into the packet. For a packet arrived from the b-domain, the I-SID is used to identify the VFI for the i-domain processing. From the service MIB. |
| I32 alaSaaMacCtrlMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.20 | Integer32 | read-only | Specifies the maximum jitter among all the iterations of the SAA. |
| I32 alaSaaMacCtrlMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.17 | Integer32 | read-only | Specifies the maximum round trip time among all the iterations of the SAA. |
| I32 alaSaaMacCtrlMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.18 | Integer32 | read-only | Specifies the minimum jitter among all the iterations of the SAA. |
| I32 alaSaaMacCtrlMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.15 | Integer32 | read-only | Specifies the minimum round trip time among all the iterations of the SAA. |
| I32 alaSaaMacCtrlNumPkts | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.11 | Integer32 | read-create | Specifies the number of packets to be sent in one MAC-Ping iteration.Configuration of number of packets and inter packet delay should be such that total execution time remains less then 10s. |
| STR alaSaaMacCtrlOwnerIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.1 | SnmpAdminString | not-accessible | Owner name to identify the responsiblity of the entries in the table. |
| I32 alaSaaMacCtrlPayloadSize | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.10 | Integer32 | read-create | Specifies the size of the MAC-Ping payload to be used for the MAC-Ping operation. |
| OCT alaSaaMacCtrlPktData | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.8 | OCTET STRING | read-create | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. |
| ROW alaSaaMacCtrlRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.3 | RowStatus | read-create | Allows entries to be created and deleted in the table. createAndWait value is not supported for this object. |
| alaSaaMacCtrlTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1 | not-accessible | It defines the MAC-Ping Control Table for providing the ping capability via SNMP. The results of these tests are stored in the alaSaaMacResultsTable and alaSaaMacHistoryTable. | |
| STR alaSaaMacCtrlTestIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.2 | SnmpAdminString | not-accessible | Unique name to identify the entries in the table. This name is unique across various SNMP users. |
| C32 alaSaaMacCtrlTotalPktsRcvd | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.14 | Counter32 | read-only | Specifies the total number of packets received during all the ping iterations. |
| C32 alaSaaMacCtrlTotalPktsSent | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.13 | Counter32 | read-only | Specifies the total number of packets sent during all the ping iterations. |
| DAT alaSaaMacCtrlTSMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.24 | DateAndTime | read-only | Specifies the timestamp of the iteration that gave the maximum packet jitter. |
| DAT alaSaaMacCtrlTSMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.22 | DateAndTime | read-only | Specifies the timestamp of the iteration that gave the maximum packet delay. |
| DAT alaSaaMacCtrlTSMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.23 | DateAndTime | read-only | Specifies the timestamp of the iteration that gave the minimum packet jitter. |
| DAT alaSaaMacCtrlTSMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.21 | DateAndTime | read-only | Specifies the timestamp of the iteration that gave the minimum packet delay. |
| I32 alaSaaMacCtrlVlan | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.5 | Integer32 | read-create | The 12 bit Vlan value to be used in the VLAN tag, in the transmitted frame. |
| I32 alaSaaMacCtrlVlanPriority | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.8.1.1.6 | Integer32 | read-create | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. |
| alaSaaMacHistory | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10 | |||
| alaSaaMacHistoryEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1 | not-accessible | ||
| alaSaaMacHistoryGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.10 | Collection of objects for management of Saa Mac-Ping History table. | ||
| U32 alaSaaMacHistoryIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1.1 | Unsigned32 | not-accessible | An entry in this table is created when the result of an MAC-ping iteration is determined. The initial 2 instance identifier index values identify the alaSaaMacCtrlEntry that an MAC-ping iteration result (alaSaaMacHistoryEntry) belongs to. The alaSaaMacHistoryIndex element selects a single ping iteration result. The value of this object starts from 1 and can go up to 20,history of first 20 packets will be stored. |
| I32 alaSaaMacHistoryPktJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1.3 | Integer32 | read-only | The jitter value for a single packet in an iteration. |
| I32 alaSaaMacHistoryPktRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1.1.2 | Integer32 | read-only | The round trip time taken by a single packet in an iteration. |
| alaSaaMacHistoryTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.10.1 | not-accessible | Defines a table for storing the results of a MAC-Ping iteration. The number of entries in this table for a configured test are limited by the value of the corresponding alaSaaCtrlMaxHistoryRows object. An entry in this table is created when the result of an MAC-Ping test is determined. An entry is removed from this table when its corresponding alaSaaMacCtrlEntry is deleted. The agent removes the oldest entry for a test in the alaSaaMacHistoryTable to allow the addition of a new entry for that test once the number of rows in the alaSaaMacHistoryTable reaches the value specified by alaSaaCtrlMaxHistoryRows. | |
| NTF alaSaaMacIterationCompleteTrap | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.3 | A alaSaaIPIterationCompleteTrap notification is sent when a IP SAA iteration is completed. | ||
| alaSaaMacResults | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9 | |||
| I32 alaSaaMacResultsAvgJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.12 | Integer32 | read-only | The average jitter value. |
| I32 alaSaaMacResultsAvgRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.9 | Integer32 | read-only | The average round trip time. |
| alaSaaMacResultsEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1 | not-accessible | Defines an entry in the alaSaaMacResultsTable. The alaSaaMacResultsTable has the same indexing as the alaSaaMacCtrlTable in order for a alaSaaMacResultsEntry to correspond to the alaSaaMacCtrlEntry that caused it to be created. An entry in this table summarizes results from multiple invocations of the test configured by the corresponding entry in alaSaaMacCtrlTable. | |
| alaSaaMacResultsGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.9 | Collection of objects for management of Saa MAC-Ping Results Table. | ||
| I32 alaSaaMacResultsInterPktDelay | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.4 | Integer32 | read-only | Specifies the inter-packet-delay with which the packets were sent in the iteration. |
| I32 alaSaaMacResultsMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.13 | Integer32 | read-only | The maximum jitter value. |
| I32 alaSaaMacResultsMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.10 | Integer32 | read-only | The maximum round trip time. |
| I32 alaSaaMacResultsMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.11 | Integer32 | read-only | The minimum jitter value. |
| I32 alaSaaMacResultsMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.8 | Integer32 | read-only | The minimum round trip time. |
| U32 alaSaaMacResultsPktsRcvd | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.3 | Unsigned32 | read-only | Specifies the number of packets received during a single MAC-Ping iteration |
| U32 alaSaaMacResultsPktsSent | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.2 | Unsigned32 | read-only | Specifies the number of packets sent during a single MAC-Ping iteration. |
| alaSaaMacResultsPort | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11 | |||
| I32 alaSaaMacResultsPortChassis | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.1 | Integer32 | accessible-for-notify | The chassis number of the entry. |
| alaSaaMacResultsPortEntry | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1 | not-accessible | ||
| alaSaaMacResultsPortGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.12 | Collection of objects for management of Saa Mac-Ping Port table. | ||
| I32 alaSaaMacResultsPortJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.9 | Integer32 | read-only | The jitter value for a single packet in an iteration. |
| I32 alaSaaMacResultsPortMaxJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.11 | Integer32 | read-only | The maximum jitter value for a single packet for the port. |
| I32 alaSaaMacResultsPortMaxRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.8 | Integer32 | read-only | The maximum round trip time taken by a single for the port. |
| I32 alaSaaMacResultsPortMinJitter | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.10 | Integer32 | read-only | The minimum jitter value for a single packet for the port. |
| I32 alaSaaMacResultsPortMinRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.7 | Integer32 | read-only | The minimum round trip time taken by a single packet for the port. |
| I32 alaSaaMacResultsPortPktsRcvd | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.5 | Integer32 | read-only | The number of receive packets. |
| I32 alaSaaMacResultsPortPktsSent | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.4 | Integer32 | read-only | The number of transmit packets. |
| I32 alaSaaMacResultsPortPort | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.3 | Integer32 | accessible-for-notify | The port number of the entry. |
| I32 alaSaaMacResultsPortRTT | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.6 | Integer32 | read-only | The round trip time taken by a single packet in an iteration. |
| I32 alaSaaMacResultsPortSlot | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1.1.2 | Integer32 | accessible-for-notify | The slot number of the entry. |
| alaSaaMacResultsPortTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.11.1 | not-accessible | Defines a table for storing the results of ports for a MAC-Ping iteration. It only holds results from the last iteration. | |
| INT alaSaaMacResultsRunResult | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.5 | INTEGER | read-only | The result of the MAC-Ping iteration. |
| OCT alaSaaMacResultsRunResultReason | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.6 | OCTET STRING | read-only | If the iteration fails, this field indicates the reason for failure. If the reason for failure cannot be determined the value of this field is the string Unknown. For successful iterations, the value of this field is the string 'Iteration successful'. |
| DAT alaSaaMacResultsRunTime | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.7 | DateAndTime | read-only | The date and time at which the iteraton was run. |
| alaSaaMacResultsTable | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1 | not-accessible | Defines the MAC-Ping Results Table for providing the capability of performing MAC-Ping operations. The results of these operations are stored in the alaSaaMacResultsTable and the alaSaaMacHistoryTable. An entry is removed from the alaSaaMacResultsTable when its corresponding alaSaaCtrlEntry is deleted. | |
| U32 alaSaaMacResultsTestRunIndex | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.9.1.1.1 | Unsigned32 | accessible-for-notify | The value of alaSaaMacResultsTestRunIndex identifies the row entry that reports results for a single test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows. |
| alaSaaNotificationsGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.11 | A collection of notifications used by SAA to signal to a management entity that SAA iteration has completed. | ||
| NTF alaSaaPacketLossTrap | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.4 | A alaSaaPacketLossTrap notification is sent when a packet is lost during a test. | ||
| NTF alaSaaRTTThresholdRedTrap | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.8 | A alaSaaRTTThresholdRedTrap notification is sent when the RTT Threshold is crossed. | ||
| NTF alaSaaRTTThresholdYellowTrap | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0.6 | A alaSaaRTTThresholdYellowTrap notification is sent when 90% of the RTT Threshold is crossed. | ||
| INT alaSaaSpbAutoCreate | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.1 | INTEGER | read-write | Determines if the SPB VLANs are automatically configured. |
| INT alaSaaSpbAutoStart | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.2 | INTEGER | read-write | Determines if the SPB VLANs are automatically started. |
| T/F alaSaaSpbDropEligible | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.8 | TruthValue | read-write | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. |
| alaSaaSpbFeature | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14 | |||
| T/F alaSaaSpbFlush | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.14 | TruthValue | read-write | When set TRUE, SPB sessions will be flushed and reallocated with the current SPB MACs and VLANs. |
| alaSaaSpbGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.14 | Collection of objects for management of profile bindings. | ||
| I32 alaSaaSpbInterPktDelay | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.5 | Integer32 | read-write | Specifies the delay between two consecutive packets transmitted during an iteration. The value specified should be a multiple of 100. |
| I32 alaSaaSpbInterval | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.3 | Integer32 | read-write | Interval, in minutes, between two iterations of the SAA test. Valid values are 1, 2, 5 and 10-1500. |
| I32 alaSaaSpbJitterThreshold | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.10 | Integer32 | read-write | Trap is generated when the Jitter Threshold is crossed. 0 indicates it is diabled. |
| INT alaSaaSpbKeep | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.13 | INTEGER | read-write | When set on, SPB sessions will not be deallocated when SPB indicates a MAC or VLAN went away. |
| I32 alaSaaSpbNumPkts | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.4 | Integer32 | read-write | The number of packets to be sent in one iteration of Eth-LB/DMM test. |
| I32 alaSaaSpbPayloadSize | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.6 | Integer32 | read-write | Specifies the size of the MAC-Ping payload to be used for the MAC-Ping operation. |
| OCT alaSaaSpbPktData | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.9 | OCTET STRING | read-write | An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent. |
| T/F alaSaaSpbReset | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.12 | TruthValue | read-write | When set TRUE, will set the alaSaaSpbFeature variables to the defualts. |
| I32 alaSaaSpbRTTThreshold | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.11 | Integer32 | read-write | Trap is generated when the RTT Threshold is crossed. 0 indicates it is diabled. |
| I32 alaSaaSpbVlanPriority | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.14.7 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. |
| alaSaaXmlFeature | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13 | |||
| STR alaSaaXmlFilename | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13.2 | SnmpAdminString | read-create | Save file location. |
| alaSaaXmlGroup | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1.13 | Collection of objects for management of profile bindings. | ||
| I32 alaSaaXmlInterval | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13.3 | Integer32 | read-create | Interval where SAA will save the file. The value is in minutes. |
| INT alaSaaXmlStatus | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.13.1 | INTEGER | read-create | Enables the XML file feature. |
| alcatelIND1SaaMIB | 1.3.6.1.4.1.6486.801.1.2.1.56.1 | This module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Service Assurance agent. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE | ||
| alcatelIND1SaaMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.2.1 | Compliance statement for Saa. | ||
| alcatelIND1SaaMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.2 | Branch for Saa Module MIB Subsystem Compliance Statements. | ||
| alcatelIND1SaaMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2 | Branch for Saa Module MIB Subsystem Conformance Information. | ||
| alcatelIND1SaaMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.56.1.2.1 | Branch for Saa Module MIB Subsystem Units of Conformance. | ||
| alcatelIND1SaaMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1 | Branch For Saa Objects. | ||
| alcatelIND1SaaNotifications | 1.3.6.1.4.1.6486.801.1.2.1.56.1.0 | Branch for Saa Notifications. | ||
| saaTrapsObj | 1.3.6.1.4.1.6486.801.1.2.1.56.1.1.15 |
RFC description
Service Assurance agent MIB for Alcatel's Birds of Prey product line enabling network performance monitoring and service quality assessment.
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.