ALCATEL-IND1-OPENFLOW-MIB

All MIBs › ALCATEL-IND1-OPENFLOW-MIB

Organization: Alcatel-Lucent

Last Updated: 2013-11-08

Category: Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch OpenFlow MIB for managing SDN controller connections, flow tables, and hybrid OpenFlow mode.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-OPENFLOW-MIB?

ALCATEL-IND1-OPENFLOW-MIB is an Alcatel-Lucent enterprise MIB for the OS6900 switch product line that manages OpenFlow SDN functionality, including controller connections, flow table state, and hybrid OpenFlow operating mode. It exposes SDN-control-plane configuration and status data covering how the switch is bound to an OpenFlow controller and how it splits forwarding between traditional and OpenFlow-programmed paths. For hardware/software status monitoring, its relevant surface is the operational state of the OpenFlow subsystem itself, such as controller connectivity and switch mode, rather than classic hardware sensors like temperature or power. It is built specifically as an Alcatel enterprise extension for the OS6900 platform and depends on the switch's underlying OpenFlow protocol implementation rather than a general IETF standard MIB. It is deployed in Alcatel-Lucent OmniSwitch OS6900 data center switches operating in SDN/OpenFlow-enabled network fabrics. Engineers can download the ALCATEL-IND1-OPENFLOW-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-OPENFLOW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch OS6900 data center switch

Monitoring Examples

No sample objects were provided for this module in this batch, so a concrete polling example citing real object names cannot be responsibly constructed. Based on the module description, a realistic scenario would involve checking OpenFlow controller connection status and hybrid-mode configuration to confirm the switch is actively under SDN control, but specific object names are not available here to ground that example.

Imported Objects

From ALCATEL-IND1-BASE

softentIND1OpenflowMIB

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1OpenflowMIB	1.3.6.1.4.1.6486.801.1.2.1.77.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Openflow for OS6900 Product Line. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1OpenflowMIBNotifications	1.3.6.1.4.1.6486.801.1.2.1.77.1.0
alcatelIND1OpenflowMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.77.1.1			Alcatel-Lucent Openflow Managed Objects.
alaOpenflowGlobalConfigObjects	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.1
I32 alaOpenflowGlobalBackoffMax	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.1.1	Integer32	read-write	Alcatel-Lucent Openflow maximum back-off time in seconds for controller connection attempts.
I32 alaOpenflowGlobalIdleProbeTimeout	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.1.2	Integer32	read-write	Alcatel-Lucent Openflow idle probe timeout value in seconds. If set to 0, idle probing is disabled.
alaOpenflowLogicalSwitchTable	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2		not-accessible	This table contains one row for each Logical Switch.
alaOpenflowLogicalSwitchEntry	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1		not-accessible	Information about the Openflow Logical Switches.
STR alaOpenflowLogicalSwitch	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.1	SnmpAdminString	not-accessible	Openflow Logical Switch Name.
INT alaOpenflowLogicalSwitchAdminState	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.2	INTEGER	read-create	Logical Switch Admin State. Enable or disable the Logical Switch. When disabled, all controllers for the Logical Switch will be operationally disabled and flows added by those controllers will be removed.
INT alaOpenflowLogicalSwitchMode	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.3	INTEGER	read-create	Openflow Logical Switch Mode. Normal is regular Openflow, API is for ACL-like flow operation. Only one Logical Switch can be in api mode at a time. This object cannot be modified after the Logical Switch has been created.
BIT alaOpenflowLogicalSwitchVersions	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.4	Bits	read-create	Openflow Logical Switch Bitmap of enabled Openflow versions. At least one version must be enabled.
I32 alaOpenflowLogicalSwitchVlan	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.5	Integer32	read-create	Openflow Logical Switch VLAN. The value 0 indicates that no VLAN has been specified, it is not a valid value to write. This object is not valid to write when creating/modifying an entry with alaOpenflowLogicalSwitchMode api(2)
I32 alaOpenflowLogicalSwitchControllerCount	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.6	Integer32	read-only	Count of the configured controllers for the Logical Switch.
I32 alaOpenflowLogicalSwitchInterfaceCount	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.7	Integer32	read-only	Count of the configured interfaces (ports and link aggregations) for the Logical Switch.
I32 alaOpenflowLogicalSwitchFlowCount	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.8	Integer32	read-only	Count of the flows pushed to the Logical Switch by its controllers.
ROW alaOpenflowLogicalSwitchRowStatus	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.2.1.9	RowStatus	read-create	Deleting a row from this table will also remove associated entries from other tables in this mib that have a logical switch as part of their index.
alaOpenflowControllerTable	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3		not-accessible	This table contains one row for each controller on each logical switch. Currently, up to three controllers per logical switch are supported per logical switch.
alaOpenflowControllerEntry	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1		not-accessible	Information about the Openflow Controllers attached to Logical Switches.
STR alaOpenflowControllerLogicalSwitch	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.1	SnmpAdminString	not-accessible	Openflow Logical Switch Name.
IPt alaOpenflowControllerIpType	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.2	InetAddressType	not-accessible	Openflow Controller IP Address Type. The only type currently supported is ipv4(1)
IP alaOpenflowControllerIp	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.3	InetAddress	not-accessible	Openflow Controller IP Address. As specified by alaOpenflowControllerIpType, only ipv4 is currently supported
I32 alaOpenflowControllerPort	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.4	Integer32	not-accessible	Openflow Controller Port.
INT alaOpenflowControllerRole	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.5	INTEGER	read-only	Role of the Controller for the Logical Switch. The role is negotiated by the controllers and the switch is notified of the outcome (1.3.1+). 1.0 controllers will always have the role of equal. Only one controller per Logical Switch can have the role of master.
INT alaOpenflowControllerAdminState	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.6	INTEGER	read-create	Controller Admin State. Enable or disable connection to the controller. The Logical Switch runs in 'Fail Secure Mode' so all flow aging, etc continues unaffected when the controller is administratively disabled.
INT alaOpenflowControllerOperState	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.7	INTEGER	read-only	State of the Logical Switch connection to the Controller.
ROW alaOpenflowControllerRowStatus	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.3.1.8	RowStatus	read-create	On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable, an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable.
alaOpenflowInterfaceTable	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4		not-accessible	This table contains one row for each interface (port or link aggregation) assigned to a logical switch. An interface can only belong to one logical switch at a time. If a logical switch in API mode exists, interfaces cannot be manually added to/deleted from it; instead, interfaces default to the API mode logical switch when not assigned to another Logical Switch. Interfaces can be reassigned from the API mode logical switch to a normal mode logical switch (by adding it to that normal mode logical switch) but not directly reassigned from one normal mode logical switch to another normal mode logical switch.
alaOpenflowInterfaceEntry	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1		not-accessible	Information about the interfaces assigned to Openflow Logical Switches.
STR alaOpenflowInterfaceLogicalSwitch	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.1	SnmpAdminString	not-accessible	Openflow Logical Switch Name.
I32 alaOpenflowInterface	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.2	Integer32	not-accessible	Openflow Interface attached to a Logical Switch. Port values are dot1dBasePort values, Link Aggregations start at 32769.
INT alaOpenflowInterfaceMode	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.3	INTEGER	read-only	Openflow Interface Mode. Normal is regular Openflow, API is for ACL like flow operation.
ROW alaOpenflowInterfaceRowStatus	1.3.6.1.4.1.6486.801.1.2.1.77.1.1.4.1.4	RowStatus	read-create	On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable, an entry will be created in that table. Delete does not effect alaOpenflowLogicalSwitchTable.
alcatelIND1OpenflowMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.77.1.2			Alcatel-Lucent Openflow Conformance Information.
alcatelIND1OpenflowMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1			Branch For ALU Openflow MIB Subsystem Units Of Conformance.
alaOpenflowModuleConfigGroup	1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1.1			Openflow Global Configuration Modules Group.
alaOpenflowModuleLogicalSwitchGroup	1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1.2			Openflow Logical Switch Configuration Modules Group.
alaOpenflowModuleControllerGroup	1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1.3			Openflow Controller Configuration Modules Group.
alaOpenflowModuleInterfaceGroup	1.3.6.1.4.1.6486.801.1.2.1.77.1.2.1.4			Openflow Interface Configuration Modules Group.
alcatelIND1OpenflowMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.77.1.2.2			Branch For ALU Openflow MIB Subsystem Compliance Statements.
alaOpenflowMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.77.1.2.2.1			Compliance statement for Openflow.

RFC description

Manages OpenFlow protocol configuration for Alcatel-Lucent OS6900 product line switches.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch OS6900 data center switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-OPENFLOW-MIB

What Is ALCATEL-IND1-OPENFLOW-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description