ALCATEL-IND1-DOT1Q-MIB

All MIBs › ALCATEL-IND1-DOT1Q-MIB

Organization: Alcatel-Lucent

Last Updated: 2007-04-03

Category: VLAN and Bridging, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch IEEE 802.1Q VLAN MIB for managing VLAN membership, tagging, and port assignments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-DOT1Q-MIB?

ALCATEL-IND1-DOT1Q-MIB is an Alcatel-Lucent OmniSwitch ("Birds of Prey" line) proprietary MIB implementing IEEE 802.1Q VLAN-to-port/slot assignment, complementing the standard 802.1Q bridge MIB with Alcatel-specific tagging controls. It exposes VLAN configuration data -- per-slot/port VLAN tag assignments, tagging mode, administrative status, descriptive names, and aggregate-port (link aggregation) VLAN tag mappings. Its monitoring role is primarily configuration/software-state visibility: confirming which VLAN tags are bound to which slot/port or aggregate, and whether a port's VLAN entry is administratively enabled, rather than reporting hardware fault data. It is explicitly built as an image/extension of the IEEE 802.1Q standard and the industry-standard Q-BRIDGE-MIB, adding Alcatel's slot/port addressing scheme on top. It is typically used on Alcatel/Alcatel-Lucent OmniSwitch enterprise switches to audit and manage VLAN tagging across physical ports and link-aggregation groups. Engineers can download the ALCATEL-IND1-DOT1Q-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-DOT1Q-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel/Alcatel-Lucent OmniSwitch enterprise switch (Birds of Prey product line)

Monitoring Examples

An operator queries qPortVlanTable (entries keyed by qPortVlanSlot and qPortVlanPort) to check qPortVlanTagValue and qPortVlanStatus, confirming a given port is correctly tagged into its intended VLAN. If a port shows an unexpected qPortVlanTagValue or an administratively down qPortVlanStatus, that flags a VLAN misconfiguration; the parallel qAggregateVlanTable (keyed by qAggregateVlanAggregateId) verifies VLAN tagging is applied consistently across an aggregated link.

What Can Be Monitored

VLAN tag assignment per slot/port
VLAN tagging mode/status
VLAN description
aggregate (LAG) VLAN tag assignment

Imported Objects

From ALCATEL-IND1-BASE

softentIND1Dot1Q

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1Dot1QMIB	1.3.6.1.4.1.6486.801.1.2.1.21.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line 802.1q for vlan assignment to slot/port and aggregates The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1Dot1QMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.21.1.1			Branch For 802.1Q Subsystem Managed Objects.
v8021Q	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1
qPortVlanTable	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1		not-accessible	This table lists the 802.1q vlans on a port.
qPortVlanEntry	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1		not-accessible	An entry in 802.1q port vlan table.
INT qPortVlanSlot	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.1	INTEGER	read-write	The slot id of the required port.
INT qPortVlanPort	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.2	INTEGER	read-write	The physical port number.
INT qPortVlanTagValue	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.3	INTEGER	read-write	Tag for a particular port
ROW qPortVlanStatus	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.4	RowStatus	read-write	Row Status for creating/deleting rules
STR qPortVlanDescription	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.5	DisplayString	read-write	Textual description of vlan added to a port.
INT qPortVlanForceTagInternal	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.1.1.6	INTEGER	read-write	0-ON, 1-OFF and 2-NA
qAggregateVlanTable	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2		not-accessible	This table lists the 802.1q vlans on a aggregate.
qAggregateVlanEntry	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1		not-accessible	An entry in 802.1q aggregate vlan table.
INT qAggregateVlanAggregateId	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1.1	INTEGER	read-write	The aggreagte id of the aggregate.
INT qAggregateVlanTagValue	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1.2	INTEGER	read-write	Tag Value on the particular aggregate.
ROW qAggregateVlanStatus	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1.3	RowStatus	read-write	Row status for creating/deleting rules.
STR qAggregateVlanDescription	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.2.1.4	DisplayString	read-write	Textual description of vlan added to a aggregate.
qAtmIfIndexVpiVciTable	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3		not-accessible	This table lists the 802.1q vlans on an ATM port.
qAtmIfIndexVpiVciEntry	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1		not-accessible	An entry in 802.1q IfIndex/VPI/VCI vlan table.
INT qAtmIfIndex	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.1	INTEGER	read-write	The ATM Interface Index.
INT qAtmVpiValue	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.2	INTEGER	read-write	.The Vpi value of the ATM VC..
INT qAtmVciValue	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.3	INTEGER	read-write	.The Vci value of the ATM VC..
INT qAtmIfIndexVpiVciVlanTagValue	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.4	INTEGER	read-write	Tag for a particular ATM Interface Index
ROW qAtmIfIndexVpiVciVlanAction	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.5	RowStatus	read-write	Row Status for creating/deleting services.
STR qAtmIfIndexVpiVciVlanDescription	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.6	DisplayString	read-write	Textual description of vlan added to an Interface Index.
INT qAtmIfIndexVpiVciAcceptableFrameTypes	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.7	INTEGER	read-write	When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames or Priority-Tagged frames received on this port will be accepted and assigned to the PVID for this port. This control does not affect VLAN independent BPDU frames, such as GVRP and STP. It does affect VLAN dependent BPDU frames, such as GMRP.
INT qAtmIfIndexVpiVciForceTagInternal	1.3.6.1.4.1.6486.801.1.2.1.21.1.1.1.3.1.8	INTEGER	read-write	0-ON, 1-OFF and 2-NA
alcatelIND1Dot1QMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.21.1.2			Branch For 802.1Q Subsystem Conformance Information.
alcatelIND1Dot1QMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.21.1.2.1			Branch For 802.1Q Subsystem Units Of Conformance.
dot1qPortGroup	1.3.6.1.4.1.6486.801.1.2.1.21.1.2.1.1			Collection of objects for management of 802.1q on the ports.
dot1qAggregateGroup	1.3.6.1.4.1.6486.801.1.2.1.21.1.2.1.2			Collection of objects for management of 802.1q on the aggregate.
alcatelIND1Dot1QMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.21.1.2.2			Branch For 802.1Q Subsystem Compliance Statements.
alcatelIND1Dot1QMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.21.1.2.2.1			Compliance statement for 802.1q.

RFC description

802.1Q VLAN management MIB for Alcatel Birds of Prey product line switches, supporting VLAN assignment and configuration.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-DOT1Q-MIB

What Is ALCATEL-IND1-DOT1Q-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description